similar to: Centos 4 & Cisco 350 MiniPCI Wireless

Hi to all, we are searching for a hardware based DSP solution for use with Asterisk based on PCI or MiniPCI to reduce main processor load and to use embedded boards with Digium E1/T1 cards like TE410P. does anyone know about any manufactorer of those cards or someone who is able to develop/build such cards? Specifications: PCI or MiniPCI up to 120 concurrent transcodings Codecs: G.729/G.729A or

Hi I got a simple patch (merely extra PCI IDs for Junghanns douBRI miniPCI: https://issues.asterisk.org/view.php?id=18169 Sadly the reporter did not follow up on the report. I'd like to get at least one positive report before I commit this. Anybody has this device and wants it to work with DAHDI? Please update the bug report. -- Tzafrir Cohen icq#16849755

I rebuilt my notebook that has the atheros card in it, and forgot to save all of my setup to get it working. I am using dkms and the madwifi rpms from rpmforge. My modprobe.conf has a line: alias wifi0 ath_pci I can ifconfig wifi0 up But the command: /usr/sbin/wpa_supplicant wpa_supplicant -dd -D madwifi -i wifi0 -c /etc/wpa_supplicant/wpa_supplicant.conf fails. Now some of my old

hi friends, i am sending this to centos mailinglist as i didnt solved problem and guys from madwifi are probably dead, as they are not giving me any reply . Thanks D. ---------- Forwarded message ---------- From: David Hl??ik <david at hlacik.eu> Date: Wed, Mar 19, 2008 at 11:39 AM Subject: ath_pci in modprobe.conf on Centos/Fedora To: madwifi-users at lists.sourceforge.net Hi friends,

NetworkManager used to work fine for me but during the last few installations its a big hurdle in the wireless connectivity. I'm using Madwifi and its interface is correctly listed and working but I cannot connect to any wifi AP without NetworkManager. I've two interfaces: eth0 and wifi0. Starting NetworkManager doesn't show any notification icon in the top right in gnome and I believe

I had a linux wireless router. I would like to monitor the queue lengh of the wireless interface. By default, the wifi0 interface is with pfifo_fast qdisc which does not report backlog packet. I replaced pfifo_fast with pfifo: ''tc qdisc replace dev wifi0 root pfifo'' Then I use iperf to send UDP pkts faster than the interface can handle but when I read the qdisc, the result is

Hi: My english is very bad but I will try to explain that it We need. We work at Library of Ministry of Economy. We use one Linux Server with Samba 3.07 (mainly it has data files, CDS/ISIS databases and It application (from Unesco)). Right now, the administrator are Information System's people from Ministry.We need in some case not only to track what user are connected and what files they are

Hello all, I might make a fool out of me, but I think the prio qdisc doesn''t work as advertised in any document I could lay my hands on. The following tests and observations were made with Linux kernel 2.6.20.21. This makes it up-to-date in the 2.6.20.x kernel family. My problem was that the link quality reported by the olsr.org olsrd degraded depending on the amount of payload

Hi, I have a IBM ThinkPat T30 a Cisco Aironet wireless internal in the laptop 802.11b only. It works great with open Acess points, but when i try to connect to encripted ones. I got the dialog box asking for the passphrase 128 bit, I enter it and after that i receive the dialog box again! Maybe my card do not support WEP or I am doing something wrong? Here is part of what i can see on

Hello, I am using wireless N on a DLink-655 wireless router. It is the "A" hardware version with the latest firmware. I am using a channel that no one in my vicinity is using, according to iwlist. I checked the Statistics from the router web interface and they are shown below for a period of less than an hour. It looks like the errors are excessive, especially the "RX Packets

Hy, I would want to mark the packets that are entering in a machine, with a mark for using diffserv with DSMARK. My machine has 2 interfaces, a ethernet and a wireless. The ethernet interface is eth1 and the other is wifi0. Firs, I would want to test that I would be able to mark the tos of the paquets that I would be receiving, for this I write in the console of my linux: iptables -A

This is a new Centos 5.1 install on a HP nc2400 (that use to run XP). Completely clean install; blew away the XP partitions... After applying all the updates, and configuring for the rpmforge repo, I used yumex to install dkms and the dkms-ipw3945, ipw3945-firmware, and ipw3945d rpms. lsmod|grep ipw shows: ipw3945 180391 1 ieeee80211 33417 1 ipw3945 and dmesg)grep

I want to convert the last of my filesystems to ext3. The only one left is /boot. It is not very big however, only about 10MB itself. Any recommendations on what size journal to put a /boot filesystem of only 10-20MB? Oh, BTW: "tunefs -j -J size=..." is awesome. No more gyrations with dd, chattr, lilo -R, etc. Nice! One note however: even in Stephen's 1.20.WIP.sct-20010216

Hi, I have a laptop DELL M90 with an Intel PRO/Wireless 3945ABG card. After installed new rpm drivers (see below), my card is recognized and I can see my wireless acces point with (iwlist - iwconfig) but it's impossible to connect to it. It seem that I can't obtain an IP address. In the log message I have "dhclient : DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval ) The

Duncan, Yes, I'd been pretty much performing the same diagnosis in parallel - it seems we just don't have that libLLVMSupport library built. Last night, tried the build of clang a few different ways to get that library built - including specifying the --gcc-toolchain option. No Joy! Which of the clang/llvm source trees provides it? or is it in another source package? tools? Is there a

RPvs> On Fri, 11 May 2018 07:14:38 -0700 RPvs> Gregory Sloop via samba <samba at lists.samba.org> wrote: >> So, I'm curious about the contrast between modifying netplan vs >> simply disabling systemd.resolved >> Is there some advantage to the gyrations to make netplan work, vs >> simply disabling resolved and manually defining the IP and DNS >>

I have an Everex laptop (ick, but it was super cheap) that has an Atheros wireless NIC in it, but I can't seem to get it to connect to my wireless in-home LAN. Here's what I've done so far (that isn't working) - any suggestions? [root at marktop mark]# lspci | grep Ether 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c) 05:01.0 Ethernet controller:

Hello! I'm trying to make a wireless mesh network with b.a.t.m.a.n. protocol, and I would like to secure the wireless links with tinc. My test network is 2 wireless routers with OpenWRT Kamikaze firmware, and the network topology is the following: |CLIENT|eth0: 192.168.180| <--> |eth0: 192.168.1.1|MESH-NODE|ath0: 192.168.5.54| <~~> |ath0: 192.168.5.51|GW|eth1: 192.168.1.51|

hi all, this is my first hit on the mailing list. hope i m posting in the right place. well, i have a dell vostro 1510 laptop with broadcom wifi adapter. n it doesnt work! :( i installed the wifi drivers with ndiswrapper. iwconfig shows the following. [root at laptop ~]# iwconfig lo no wireless extensions. eth0 no wireless extensions. sit0 no wireless extensions. wlan0

All - desperate plea for help here. Overview Centos 4.5 Kernel 2.6.9.55.0.9.EL with source dell Latitude 810 Im totally at my wits end... Ive tried like mad to get ndiswrapper to work for my lynksys WPC54GS wireless card. No matter what I try ndis gives some kind of error on installing the module after about a dozen attempts 8 kernels, and 5 days- I finally GAVE UP! unreal So, I