similar to: Erratic CPU load

Steve Kann has developed a new jitterbuffer for IAX2, that hopefully will be integrated into Asterisk v1.1 soon, to be part of the 1.2 stable relase. Zoa and his bulgarian team is porting this buffer to SIP/RTP, but needs support in the form of funding in order to take the time to test this out and complete it in time. Please paypal your contribution to sponsor@astertest.com today. Every

Hey gang, I've been able to use sipp to produce some call volume on our asterisk server. The server has no problems handling 50 simul calls. But then again, no RTP is being done. I tried to use the rtp echo ability of sipp but that doesn't seem to work right. I also setup a fake number in asterisk that when called by sipp, would dial another number via PRI, hoping that some 729

Hi, Did someone ever managed to make Astertest (http://www.asteriskguru.com/tutorials/astertest.html) work ? I followed all the instructions of this tutorial and corrected the mistakes pointed by the users but it still doesn't work. I can compile it and load app_securax_cpuinfo.so. When trying to load app_securax_serverload.so I have this error : WARNING[31477] : loader.c: 325

I've just put up CentOS4 on my HP ze4630us laptop, and the installation produced only two problems of note, both related to X operations. 1. The installer refused to allow 1024x768 resoultion for the screen. After install, manually setting the resolution in xorg.conf was no problem. 2. Erratic touchpad operation. This unit has a synaptic touchpad. I've also noted similar problems on my

I have had a long term problem with my set up. winbind authentication is erratic. Whenever I restart one of my servers the member server refuses to authenticate users. Sometimes is will only authenticate some users on some shares. Usually by fiddling with it I can eventually get it to work but I can't identify the solution so I can replicate it. Once I get can finally get it to work it

Hello I just installed a TE110P in a Dell Poweredge 750 (rackmount), which is connected via crossover T1 cable to a adit 600. Anyway, I've encountered an array of errors, which I believe I have narrowed down to the 22 IRQ misses I encounter on zttool. I've noticed that the te110p and the usb device share an IRQ. Could that be the source of my woes? Would disabling the usb device in the

I'm not sure this list is the right place for this thing. I noticed some erratic behaviour in sammon(). Running sammon on two nearly identical sets of data results in very different results. Below is an example. I create an initial configuration with cmdscale() and store it into 'vec1'. I write this to file, and read it back in again to 'vec2'. According to cor() on the three

I am trying to rsync between two linux boxes, but one of the linux boxes is using samba to map a share from a windows SAN onto it's file system. Rsync quit working properly when I changed the source directory from a local ext3 filesystem to the windows share mapped onto the filesystem. This setup may be kind of odd, but I need to keep user's data on the SAN and I also need the linux box to

I have noticed while testing my Samba 3.0.2a primary and backup domain controllers with Windows XP clients, that when I attempt to login to the Samba PDC, the XP client will sometimes randomly choose the backup domain controller. I only want the client to join the backup domain controller when the PDC is offline. I am not experiencing any random network outages or DNS failures so I am bewildered

I am curious if anyone has had problems trunking iax2 with 100+ concurrent calls. I am planning on testing this out tomorrow, however I wanted to know if anyone else has had a problem with this prior to my test so I know what to look for if anything is known and what resolutions have been found if there are any known problems. Specifically I am doing this on fbsd 6 with asterisk 1.2.4 using

I'm running Linux Fedora Core 2 with Samba 3.0.3-5 installed. I'm experiencing some strange behavior when I try to mount a FAT32 share on a Win2k workstation. After a fresh reboot, when I try smbmount (or mount.smb) everything seems to work (no error messages). Then when I try to access the mountpoint - via Nautilus or by doing "ls" in a terminal - the system freezes. If I

Hi everyone, I have been using adaptIntegrate from the cubature package for a multidimensional integral that has infinite variance (and so not appropriate for Monte Carlo techniques). Most of the time it works but sometimes (though not always) when I slightly increase the accuracy I want, or increase the bounds of integration I get the following error: REAL() can only be applied to a

should I use mpg123 with asterisk 1.2.7 or should i use the native player asterisk has? the target machine will receive heavy load. also, has anyone succedded in compiling mpg123 in a dual core pentium with centos 4.3 ? -- ------------------------------------------- Erick Perez Linux User 376588 http://counter.li.org/ (Get counted!!!) Panama, Republic of Panama

Hi I'm having a problem with ipfw, I think. For some reason it denies packets randomly for example: PING 196.14.239.2 (196.14.239.2): 56 data bytes ping: sendto: Permission denied ping: sendto: Permission denied 64 bytes from 196.14.239.2: icmp_seq=2 ttl=63 time=0.258 ms 64 bytes from 196.14.239.2: icmp_seq=3 ttl=63 time=0.233 ms 64 bytes from 196.14.239.2: icmp_seq=4 ttl=63

Consider the code: x <- seq(0,1,0.2) y <- seq(0,1,0.01) cbind(match(y,x),y) which, surprisingly, doesn't show a match at 0.6! (It gives correct matches at 0, 0.2, 0.4, 0.8 and 1, though) In addition, x[4]==y[61] yields FALSE. (but x[5]==y[81], the one for 0.8, yields TRUE) Is this a consequence of machine error or something else? Could this be overcome? (It works correctly when

Greetings all, I have a problem with my Samba server seeming to hang for 10 seconds every 5 minutes or so. Client machines also become sluggish across the entire network during this period. It does not seem to affect file transfers that are in progress. Any ideas would be greatly appreciated. Philip nsc-dell01:/var/log/samba # uname -a Linux nsc-dell01 2.6.18.2-34-default #1 SMP Mon Nov 27

Morning, We recently pushed our Asterisk video bridge into a DMZ and since then, local calls have been unreliable to say the least. While offsite calls work nicely, calls on our internal server usually fail to ring the far end. Two test calls that were made 4 minutes apart yielded different results: one rang the far end, the other kept trying to transmit the Invite. The configuration didn't

Long story short... Snom's ... Retrieve button... works when MWI is *NOT* lit but does *NOT* work when it is lit. Any advice Useragent : snom360/6.5.2 Function: F_RETRIEVE [root@pbx ~]# asterisk -rx "show version" Asterisk 1.2.13 built by root @ pbx on a i686 running Linux on 2006-11-17 16:35:22 UTC [gateway] exten => 201,hint,SIP/201 exten =>

Hello, It's several days I try to track this bug, and even cannot cook a reproducible example. Yet, it occurs consistently in a long-running task after a variable period of time. Here is an example: ... my long-running code [as I said, cannot give something simple that produces this bug in a reproducible manner] Error in match(x, table, nomatch = 0L) : formal argument

I'm coming to Paris Dec 19. I was wondering if there was any interest in having an Asterisk get together in Paris sometime near there. Any one out there interested? Anyone in Paris who could help organize something like that? :) Mark