similar to: Soyo G668 + Asterisk

Hi All, I have installed chan_unicall and MFC/R2 successfully, and is runnign fine. But I noticed that once unicall is installed, asterisk CPU usage as reported by 'top', jumps to 99% every few seconds. I have no incoming calls, and I have even removed the E1 lines from card and I tried almost everything possible but I was not successful in determining the cause of this high cpu

Hi, anyone can confirm if the Linksys's ATA and Router (PAP2-NA and RT31P2-NA) have the same limitation of just one G.729 call like the Cisco ATA 186 ? I'm testing both appliances here and found this issue but could not confirm this anywhere (nothing on the manual, no document or post from any user about this). In my tests they use G.729 only on the first call and G.711 on the

Hi, hoping that experienced hands will quickly show me the right way: after a fruitless web search i am turning to this list with my rather elementary question: is there any other way to communicate with the IAXy besides using special utility software that needs to be compiled under UNIX? Here is the story: about two months ago, after some not very satisfactory attempts at using SIP (my phone

Has anyone had any experience with the Soyo G688 phone? I'd like to use it as a agent's phone. Is it reliable? How well does it work with *? How's the quality? Features? Thanks, Waldo

I'm having a strange problem with transfers on IAX phones. I have two IAX phones behind my firewall that are extensions from my office phone system. Both phones can receive calls, but only one of the extensions can do blind transfers by pressing the # key. I have a similar problem at the office. Some of the phones can transfer calls, some of them can't. And my Zap lines can always

oops. I successfully installed RedHat 8.0 onto two ATA133 80gig drives running a mirrored RAID with the hpt37x (highpoint 372 onboard RaidController on the SOYO DRAGON motherboard.) I used ext3 as my filesystem type of choice but unfortunately the system shut down uncleanly and it now is coming up with the "press Y to force file system integrity check" at boot.... which it runs by

Hi all, I have begun the release of my MFC/R2 protocol software. At http://www.opencall.org/installing-mfcr2.html there are instructions for installing what I have released so far. This is the MFC/R2 protocol software, and a test program. The software to interface Asterisk to the MFC/R2 code will be released shortly. It used to work, but it hasn't been touched for a while, and Asterisk

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Having a workstation with an odd glitch, and I'm hoping someone can help. We have a 35MB shared Excel file with our purchasing history in it. (I know, I've been trying to talk them into a database of some sort, but they'll have none of that...) One workstation in the entire plant is having issues opening it. The file will load, it will

That little Digium adapter S101I is a nice and compact (good for travel) but has a serious limitation, it doesn't support bridging. If I have four/five of these units registered to my asterisk server (over the Internet) and with standard DSL or Cable connection all for of them connected and in use (utilizing G711); my upload bandwidth will get saturated as all of them have to go via my

Hi all, I am attempting to call from softphone to softphone, I am using X-lite to call another X-lite. I get the phones to call each other and finnaly connecting, but cannot hear the voice at all. Is there any ideas as to why this is happening. (I don't have sound card in my linux server. I need one in my linux server ??) PS: callonhold is working but cannot hear the music too. look at

One system I have is configured thusly: AMD Duron 1200 (I have frequency restrictions in this application, and must stay below 1.3GHz or must be above 2.0GHz, and the 1200 fits nicely in our interference plan; besides, I was given the chip, and it's fast enough for the application). Soyo DRAGON KT400 motherboard, 512MB DDR RAM (DDR266). Silicon Image SATA interface card. Machine boots

Im sure this has been thrown around this list 1,000 times, and Im sure its been around the net too.. But I have done everything, and cannot seem to get inward calls to be processed on my asterisk box.. First, Let me tell you what works: 1) Softphones (ZoIPer using IAX2 Protocol) Can make calls behind a Natted Firewall to the FXS Port, and it rings, and calls work full duplex. 2) Soyo IP Phone

Hi there I recently installed an OCFS2 filesystem on our FC-SAN. Everything seemed to work fine and I could read & write the filesystem from both servers that are mounting it. After a while though, writes coming from one node do not appear on the other node and vice versa. I am not sure what's causing this, and not very experienced at debugging filesystems. If anybody has any

All, I have a problem with a new Seagate hard disk. The problem occurs when i go to install CentOS, i insert the cd and start the boot up process, when it gets to the section where it detects the hard disks, the driver is seems crashes, the message it produces complains about no one caring about a interrupt on IRQ11. The hard disk is a Seagate 200GB 8MB SATA150 NCQ drive, on a SilliconImage

I'm really, REALLY hoping someone can shed some light on this. I posted something similar about this but I got more confusing info from my LAN people. The hardware is a Soyo K-333 Dragon MB running SuSE 8.0 w/Apache2 & Samba. I have 2 NIC's, the onboard NIC and a D-Link 530TX+ card. I have two IP addresses, 155.16.78.54 & .55 on eth0 I get lots of collisions, errors, etc., and

Hi, thanks for great job do with xen .deb, we have a problem on xen 3.4.2 (certainly not just us) how is impossibile do hvm domu work because there isn't qemu-dm, i read a few months ago discussion of this but also now there is the problem, will be resolved soon? it possibile rebuild the current package with the simple addition of qemu? thanks in advance for any reply -------------- next

I first downloaded Vorbis about a month ago, around the time Rok Papez posted comparisons of Ogg and Lame [*]. Here's my much rougher test on a single file. CPU: AMD K6-233 MP3: LAME 3.70, mp3blaster 2.0b6 Ogg: Vorbize 0.6 (Xiphophorus libVorbis I 20000718), ogg123-0.1 Data set: Ministry, "The Fall" (51,955,724 byte WAV) * * * Ogg Vorbis command line: time vorbize -v -w

Brendan Cully wrote: > > The format of ices.conf changed somewhat in 0.2, to support multiple streams > from the same playlist with different reencoding options. In short, these > settings have been moved into the Stream node. For more info have a look > at the sample ices.conf included with the distribution. I did modify my ices.conf when I made the upgrade. Here's my

To all.. I was using a Gigabyte motherboard, and the board seems like a bad choice. What do you guys recommend for a decent server board that would use a Dual Core processor and DDR2 ram. I dont want to replace the CPU and Mem i already have, just find a decent board that supportsthe existing.. Thanks, Ryan Nichols -------------- next part -------------- An HTML attachment was scrubbed... URL:

I bought a UTStarcom F1000 WiFi IP Phone from http://www.luxoncomm.com and tested it with Asterisk. This is a my first impression of the device. The F1000 supports SIP. It looks and operates like a cell phone, and connects to the Internet through WiFi, so you can use it at any WiFi hotspot. I set up a 802.11b wi-fi network with a Linksys BEFW11S4 Wireless-B broadband router with no security