similar to: Click-to-Talk with Asterisk?

Hello All, I got my TDM04B card installed and configured. Everything works fine I can receive calls and route to appropriate extensions. The only problem I am facing is Slowness. When I dial the PSTN number which is connected to Zap 1-1 after two ring it answers and then run the AGI script. What I did was assign it to a specific extension. So all inbound call on that PSTN number should

Hi Nitesh, check out my config that I have for the Faktortel config in the asterisk@home sourceforge forum, you'll probably be able to work out how to set it up from there. Cheers, Dean -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Nitesh Divecha Sent: Wednesday, February 23, 2005 4:12 PM To:

Greetings list, What are people's experiences with WiFi SIP phones? When I last looked into them about 18 months ago, they were incredibly expensive, had very limited range and poor battery life. In the end, it worked out much more cost effective to simply use ATAs + DECT cordless phones where there was a requirement for portable devices. I assume things must have moved on somewhat since

Hello All, Recently, I build three Asterisk 1.4 box and installed licensed copy of G729 codec. Before installing the G729 codec I tested the MOH on all three Asterisks box and it was working fine. So I install G729 codec and retested MOH and it was all wavy... Meaning the music was going up and down and missing bits and pieces and choppy... Any idea what did I do wrong? The MOH files are the

Hello All, While looking for solution to solve my Callback DTMF problem, I came across LumenVox Speech Recognition software. Has anyone tried out? Need some feedback before I purchase it... Please help... Cheers, Nitesh

Hello All, Recently I added some Nokia N95 customers and it worked pretty good. Now the customers are complaining about the dialing rules... They are used to dialing +12486543210 and +4479XXXXXX for long distance calls. Is there anyway to create a "+" sign dial plan which will allow them to dial a number with "+" sign. Cheers, Nitesh

Hello All, I would like to upgrade my recently installed Asterisk 1.2.21.1 to Asterisk 1.4.8? My OS is CentOS 4.5 with Linux 2.6.9-55.0.2.plus.c4smp #1 SMP Fri Jul 6 05:25:07 EDT 2007 i686 i686 i386 GNU/Linux Is there any detail step by step procedure to uninstall the current version and install Asterisk 1.4.8, Zaptel 1.4.4, Libpri 1.4.1, Addons 1.4.2? Cheers, Nitesh

Hello SetCallerPres function seems to be removed from Asterisk 1.4. What function or application replaced it? Bit of a problem if you want to use CLIR on your PRI connections. Jon No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.467 / Virus Database: 269.7.6/815 - Release Date: 22-05-2007 15:49 -------------- next part -------------- An HTML

Hello All, I manage to configure Asterisk RealTime and now it loads the SIP users/peers from MySQL DB. The table I am using is of A2Billing DB "cc_sip_buddies". Now the only problem I am facing is incoming calls are failing... The ATA which is assigned this DID number is behind NAT and according to Olle's explanations he said "*there's no support for NAT keep-alives

Has anyone out there successfully set up their * box to terminate their VONAGE calls? I (and I am sure lots of others) would love to hear how you did it. I'd like to be able to get rid of the extra hardware I have hanging around here and use the ASTERISK machine to handle the SIP termination instead of needing to have a Linksys modem (w/phone) and an additional X100P card. Thanks.

Hello All, Is there any way to clear the SIP Channels? When I run "sip show channels" on CLI I see +500 SIP Channels active with "unknown" codec. But thats false information, because when I restart my Asterisk and run "sip show channels" I will see the actual active channels with correct codec info. Anyways to clear the sip channels without restarting the

Hello All, I got one quick question on A2Billing. Specs: - - A2Billing v1.3 - OS CentOS 4.5 - Asterisk 1.2 - Zaptel 1.2 Did the installation and everything is working as it suppose to... Using the A2Billing documentation, I created the RateCard, SIP Trunks, and SIP Customers. I was also able to login using XLite Dialer and was able to call out to my SIP Trunk also. Now how can I remove the

Hello All, I am trying to setup a small system where Nextone Softswitch will send traffic to Asterisk and then terminate on Grandstream GXW410x IP Analog Gateway but for some odd reasons the call are flashed back from Grandstream to Asterisk and creating a Black loop... I did follow the instructions provided by Grandstream support but it doesn't seems to be working...

Hello All, I was wondering where does Asterisk stores the blacklist numbers? I looked into the dialplan and it shows that it *"Set(DB(blacklist/${blacknr})=1)"* the number... Does it save in MySQL DB? hyperion*CLI> show dialplan app-blacklist-add [ Context 'app-blacklist-add' created by 'pbx_config' ] '1' => 1.

Hello All, Is there any way to change the timezone on the fly? I have this little time clock program running on Asterisk system developed using PHPAGI. Currently, whenever user logs in, Asterisk will prompt the current system time using "$agi->say_time();" which executes "SAY TIME". Now the current timezone set on the system is "PST", and I have a request to

Hello All, I have my own AGI script running and I am trying to push the call to voice mail when Busy, Unavailable and Not Answered. Everything is working fine but the only problem is voice mail greetings for Busy and Unavailable is not played. By default only "Temp Greetings" voice mail greetings is played. I am passing the correct parameters for Busy => 'b', Unavailable

Hello All, For some odd reasons my Asterisk is keep on loosing registration of my SIP devices. On the SIP device it shows I am RESISTED but when I do "sip show peers" it shows my sip endpoints are "UNREACHABLE". And it keeps on flapping "Peer '9099993456' is now UNREACHABLE!" and "Peer '9099993456' is now REACHABLE!"... I changed my

Hello All, I'm trying to do a fresh installation on Ubuntu Server 9.10 (Karmic) 64-bit but I am getting error when "make config" is trying to install the init script... Here is the output: - Can anyone help me please... Thanking in advance... Cheers, Nitesh ################################################### ### ### DAHDI tools installed successfully. ### If you have not done

Hi, Could anyone tell me how to read the values in the "zonedata.c" file? I am looking at the "zt_tone_ringtone" field mainly. Thank you. Jad Wauthier -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070512/4c0387be/attachment.htm

Hello All, "safe_asterisk" just sent me an email saying "Asterisk on bill exited on signal 11. Might want to take a peek.". Looking at the /var/log/asterisk/message doesn't show me anything... This is a fresh installed Asterisk 1.6.2.6 on Ubuntu 9.10 (64-bit) and it is routing calls from Nextone MSW Softswitch to VPS Softswitch... Any reason why Asterisk died?