Displaying 20 results from an estimated 500 matches similar to: "Cisco Phones with Asterisk"
2005 Mar 23
0
MeetMe Upgrade !
Dear All :
I have a problem with my MeetMe ,,
I need to add the latest update of MeetMe Software so that I can add an
announce when entering/exiting the Conference Room ..
I saw a lot of WebPages are talking about 'i' option.
How can I get the latest update ? and how can I recompile my Asterisk to
use the new update ??
Thanks ,,,
Eng. Mohamed Farid ,,
Mediterranean Smart Cards Company
2007 Feb 14
2
SIP response 482 "Loop Detected"
I have a Cisco Call Manager - and need to use the IVR Feature from
Asterisk.
My extension is 400 and I am calling 558 on Asterisk In my
extension.conf I have these lines :
exten => 558,1,Answer
exten => 558,2,Playback(message.wav)
exten => 558,3,Dial(SIP/439@CallManager)
When I call 558 I heared the message then Asterisk tries to call 439 on
CallManager but with this error :
2005 Mar 25
7
What is web login password for Asteirsk@Home
2007 Feb 20
2
Mask the caller-ID
Dear All :
I need to mask the caller ID and pretend to make a transfer call from
another extension :
exten => 558,1,Answer
exten => 558,2,Playback(soundclip)
exten => 558,3,Dial(SIP/472@callman)
The scenario is like this :
Someone is calling 558 at my company - he will hear a soundclip voice
message then I will direct it to extension 472
I need 472 to not see the extension of
2006 Jan 26
3
VOIP Router
Dear All :
I need to link my HQ to some Remote Sites - I need a Router which
supports VOIP , and VPN
Also the Router Should has 3 FXS ports and 1 FXO ...
The call should be routed from the Remote Site to the HQ through a VPN
tunnel ( 3DES ) ...
Any Advise ?
Mohamed Farid ,,
Notice:
This e-mail (including attachments) is confidential and is intended solely for the addressee. Unless you are
2007 Jan 16
2
prompt for "send a message" not played in VM main, HOWTO resolve
All,
Just came across the prompt #3 from inside the top menu of VM in latest stable. Allison does not announce the prompt, but if you know it is there, you can press 3 & successfully follow the prompts from there to send your message to other users on the system. But, of course, obviously, I am asking: how do I resolve the situation whereby the users are not hearing this prompt? (since most
2023 May 09
1
[Bridge] [RFC PATCH net-next 3/5] flow_offload: Reject matching on layer 2 miss
Adjust drivers that support the 'FLOW_DISSECTOR_KEY_META' key to reject
filters that try to match on the newly added layer 2 miss option. Add an
extack message to clearly communicate the failure reason to user space.
Example:
# tc filter add dev swp1 egress pref 1 proto all flower skip_sw l2_miss true action drop
Error: mlxsw_spectrum: Can't match on "l2_miss".
We have
2003 Jul 05
1
Weird vmstat -s stats
On -STABLE as of Mon Jun 9 04:43:55 CEST 2003,
"vmstat -s" shows on one of my boxes (uptime: 26 days):
-1597015721 total name lookups
cache hits (101% pos + 0% neg) system 0% per-directory
deletions 0%, falsehits 0%, toolong 0%
Weird. I'll have to cvsup again and hope this has been fixed :)
-Regard, FH.
--
Farid Hajji --
2004 Jun 14
2
Member Server in Active Directory
I'm trying to join a Samba 3.0.4 (compiled from source on Debian) to an
Active Directory as a member server. I believe Kerberos is configured
correctly as kinit creates a ticket for the realm. Executables appear to have
support for Kerberos and LDAP (smbd -b | grep KRB and grep LDAP) return OK.
When I try to join the AD with
net ads join -U myadminusername
I'm prompted for my
2014 Aug 11
3
Asterisk support for Bittorrent Bleep
Hello,
Full disclosure: my name is Farid Fadaie and I'm in charge of BitTorrent
Bleep (a private P2P SIP-based messaging application in early alpha)
http://blog.bittorrent.com/2014/07/30/building-an-engine-for-decentralized-communications/
I have personally been a fan of Asterisk and have been using it for years
and now that we have (kind of) released Bleep, I wanted to ask you guys to
let
2007 Feb 10
9
Mini-ITX board + FXO PCI card?
Hello
Before I order a Travla C156 case
(http://206.14.132.88/products/Travla/c156/C156.html), a Via mini-ITX
motherboard (either the fanless ME6000
http://idotpc.com/TheStore/pc/viewPrd.asp?idcategory=50&idproduct=4 or the
fan-equipped M10000
http://idotpc.com/TheStore/pc/viewPrd.asp?idcategory=50&idproduct=163 ) ,
and a PCI FXO card from Digium or OpenVox... has someone already
2018 Aug 30
0
build package with unicode (farsi) strings
Dear Farid,
Try using the ASCII notation. letters_fa <- c("\u0627", "\u0641"). The full
code table is available at https://www.utf8-chartable.de
Best regards,
ir. Thierry Onkelinx
Statisticus / Statistician
Vlaamse Overheid / Government of Flanders
INSTITUUT VOOR NATUUR- EN BOSONDERZOEK / RESEARCH INSTITUTE FOR NATURE AND
FOREST
Team Biometrie & Kwaliteitszorg /
2007 Jun 03
0
Or none mentone
strange insulation in the midst of boundless tracts of dry and barren name Physcon, which afterward became his historical designation, was The plan of Cleopatra the mother, after her husband's death, was to make of ancient times. We shall have something to say in the next chapter in
of the court and the officers of her army, in one of the royal palaces. encroachments of other powers. He
2007 Jun 03
0
Or none mentone
strange insulation in the midst of boundless tracts of dry and barren name Physcon, which afterward became his historical designation, was The plan of Cleopatra the mother, after her husband's death, was to make of ancient times. We shall have something to say in the next chapter in
of the court and the officers of her army, in one of the royal palaces. encroachments of other powers. He
2008 Feb 06
2
sendmail: fatal message, sudo bash
Centos 5
Hello
I successfully converted my mta from sendmail to postfix.
no problem. mail is ok.
A by-product of that, as bizarre as it may seem is this:
As regular user, when I do 'su -' to become root, all is well.
As regular user, when I do 'sudo bash' I become root
alright but I also get:
sendmail: fatal: Recipient addresses must be specified on the command line
or
2015 Feb 17
1
Only stereo sound with gtx570 over hdmi (regression)
Hello Ben,
The working kernel code I based my investigation was a 1.3.17 + gentoo patch (so yes, pretty old)
The new one below, not working is the vanilla 3.19 (from the gentoo repo, should be identical to the latest 3.19 stable)
I've narrowed down the issue to the size of the eld.
The new patch (that indeed uses drm_eld_size) (with this patch, I have a working 3.19 kernel):
I will need to
2009 Aug 15
1
Error in running RWeka Clusteres
Hi,
I have a question about using RWeka Clusterers.If you could supply answer or
insight, I would really appreciate it.
When I run a simple code which uses a clusterer from RWeka I get an error.
the sample codes and errors are mentioned below
Code:
library(RWeka)
Cobweb(iris[,-5],control=NULL)
Error:
Error in names(class_ids) <- nms :
'names' attribute [150] must be the same
2018 Aug 30
1
build package with unicode (farsi) strings
On Thu, Aug 30, 2018 at 2:11 AM Thierry Onkelinx
<thierry.onkelinx at inbo.be> wrote:
>
> Dear Farid,
>
> Try using the ASCII notation. letters_fa <- c("\u0627", "\u0641"). The full
> code table is available at https://www.utf8-chartable.de
It's a little easier to do this with code:
letters_fa <-
2018 Aug 28
3
build package with unicode (farsi) strings
Hi,
I have a R script file with Persian letters in it defined as a variable:
#' @export
letters_fa <- c('???','?','?','?','?','?','?','?','?','?','?','?')
I have specified the encoding field in my DESCRIPTION file of my package.
...
Encoding: UTF-8
...
I also included
2007 Nov 19
2
pine 4.64 with CentOS with LDAP
Hello
pine 4.64 on CentOS 5
I have successfully compiled 4.64 with SSL and it works fine.
However, I like to add LDAP feature.
I am having trouble with compiling it with LDAP.
I built the latest stable openldap-2.3.38
I did include this when I built openldap:
./configure --with-cyrus-sasl
Compile process gives me these errors below.
Any clue as what I may be doing wrong?
Thanks,
Farid