similar to: 911 & SoftHangup on SPA-3000

I have 3 analog trunks zap/1, zap/4 and zap/5. zap/5 is the least used line. Would the following work for 911 calls? [e911] exten => 911,1,ChanIsAvail(Zap/1) exten => 911,2,Dial(Zap/1/911) exten => 911,3,Hangup() exten => 911,102,ChanIsAvail(Zap/4) exten => 911,103,Dial(Zap/4/911) exten => 911,104,Hangup() exten => 911,203,ChanIsAvail(Zap/5) exten =>

I'm trying to add an emergency dial to my context. However, when I try to dial it, I get caught in an endless loop. For debugging, I have pared out nearly all the control flow and just have ChanIsAvail() and Dial() called. Using two different extensions to call teh same number, I get two different actions by *. Here is the vvverbose output: -- Starting simple switch on

I have a question, we have some locations were I'm just planning on putting in a PRI, management also wants analog lines incase the PRI is down and someone calls 911. Is there a way to use asterisk to seize a phone line from the fax machine? I don't want to have to have an analog line that only gets used in the very rare situation with the PRI being down and someone needed to dial 911

Rich, What about a combination of your excellent/intelligent suggestion & something like this: exten => 911,1,Dial(Zap/g17/${EXTEN}) exten => 911,2,SoftHangup(Zap/1-1) exten => 911,3,Wait(1) exten => 911,4,Goto(1) ... with the idea that if a line is not free, we forcible seize one. Probably not correctly written, but, do you "get" where I am going? How would I

I am trying to use SoftHangup in my dialplan, but it's either not working or I'm not using it correctly. when i'm on the console, i see: pbx1*CLI> core show channels Channel Location State Application(Data) SIP/vgw1-000000a2 2156181505 at inbound:1 Up AppDial((Outgoing Line)) SIP/143-0000009f s at macro-SaferSIPDial Up Dial(SIP/99302156181505 at vgw1,, 2 active

Hi, Is it possible to softhangup a channel based on priority. I mean I want to put some calls in higher priority lets say 100. If all channels are busy and somebody wants to dial an extension with priority higher than 100. How can softhangup drop a line which has priority less than 100? I will appreciate your valuable help. Thanks Smir

Hi all, I am trying to drop a random channel in asterisk 1.6. The following line in extensions.conf works fine for the first channel exten => 911,4,SoftHangup(DAHDI/1-1) But I need to drop random channel for emergency not any specific one. Can someone show correct syntax for this Thanks smir

When I place an outbound call from asterisk 1.6.1.12 to a FXO port on my Cisco 1760V 12.4, the channel changes - seemingly incrementing: e.g., in the first call, below, the channel name is "SIP/vgw1-00000075" -- the second call (on the same FXO port after a soft hangup on the CLI) is "SIP/vgw1-00000077" How can I extract this information in the dialplan so that I can use

Hi, I am trying to implement 911 funtionality in my PBX. A call should drop if all lines are busy. Here is my context nineoneone from extensions.conf [nineoneone] exten => s,1,Set(SET_EMERG_FLAG=0) exten => s,n(checkavail),ChanIsAvail(${EMERGENCY_TRUNK}) exten => s,n,Set(EMERGENCY=1,g) exten => s,n,Set(SET_EMERG_FLAG=1) exten => s,n(dial),Dial(${EMERGENCY_TRUNK}/${EMERGENCY_NUM})

Help. Why is it that I can call out from my GSBudgetone SIP phone but the audio is "one-way'? Why is it that when I call my asterisk phone number, I get a fast busy?

Hi, I'm wondering if someone can share their thoughts on how to implement a system that periodically checks active channels which have been up for more than X minutes and plays/injects a sound file. The idea is to simply warn users that they've been on the phone for quite a while and maybe they should consider hanging up. If the call stays up for more than Y minutes, it is dropped

Hi there, here is my attempt to initiate a "restart when convenient" from a software SIP phone. exten => 588,1,Answer exten => 588,2,Wait(1) exten => 588,3,Playback(restart-convenient) exten => 588,4,Wait(1) exten => 588,5,Authenticate(00000) exten => 588,6,System(/usr/sbin/asterisk -rx "restart when convenient") exten => 588,7,Hangup The problem: We

when i issue asterisk -vvv command i get this error please help regards Barbra [app_softhangup.so] => (Hangs up the requested channel) == Registered application 'SoftHangup' [codec_lpc10.so] => (LPC10 2.4kbps (signed linear) Voice Coder) == Registered translator 'lpc10tolin' from format 7 to 6, cost 50 == Registered translator 'lintolpc10' from format 6 to 7,

Hello, Most traditional PBX-es have the ability to use external audio source (e.g. radio tuner) for music on hold. This is also useful because you can let your users listen to radio by dialing some extension. I wanted to achieve the same on asterisk, and chan_alsa seemed the logical choice. I installed ALSA drivers, connected the radio to line-in and added the folowing to extensions.conf: exten

Took some examples from voip-info.org to deal with call forwarding etc: exten => _*21*X.,1,NoOp(Unconditional Call Forward on extension ${CALLERID(num)} to ${EXTEN:4}) exten => _*21*X.,n,Set(DB(CFIM/${CALLERID(num)})=${EXTEN:4}) exten => _*21*X.,n,Hangup() Problem is that * don't hangup cleanly: Spawn extension (default, *21*2403, 3) exited non-zero on 'SIP/2401-081e7048'

Hi, is it possible to hangup a channel from another channel? I want to finish a call from another channel, but if I put exten => h,n,HangUp(channelname) it doesn't hangup... Is that correct? Thanks, _________________________________________________________________ -------------- next part -------------- An HTML attachment was scrubbed... URL:

So, tweaking configs, rebuilding this and that... restarting, twiddling, it works (yeah!), but fails on re-boot to work at all. Consistently, though. I believe it comes down to this: I can call out only *after* I've received a call. So, cold boot. Then: modprobe dahdi modprobe wctc4xxp modprobe wcfxo dahdi: Telephony Interface Registered on major 196 dahdi: Version: 2.1.0.3

The Asterisk Development Team has announced the release of Asterisk 1.6.2.18. This release is available for immediate download at http://downloads.asterisk.org/pub/telephony/asterisk/ The release of Asterisk 1.6.2.18 resolves several issues reported by the community and would have not been possible without your participation. Thank you! The following is a sample of the issues resolved in this

The Asterisk Development Team has announced the release of Asterisk 1.6.2.18. This release is available for immediate download at http://downloads.asterisk.org/pub/telephony/asterisk/ The release of Asterisk 1.6.2.18 resolves several issues reported by the community and would have not been possible without your participation. Thank you! The following is a sample of the issues resolved in this

I am having problems getting a Nicherons TDM400P wildcard clone to dial out. Everything appears to be configured correctly, but although I see call progress, it never seems to actually pick up the phone. (The following is a test of 911 emergency, where I substitute 811 [repair service] as the actual number dialed.) *CLI> -- Executing [911 at from-internal:1]