similar to: Tricky setup

Hi everybody, I'm trying to SIP register between two asterisk, each one have a Public IP. Asterisk told me that Unathorizae In * one sip.conf register =>usuario1:pass1@<public_ip_2> In * two sip.conf [usuario1] type=friend username=usuario1 secret=pass1 host=<public_ip_1> dtmfmode=inband Logs in * are the followings In * one logs: Sip

Hi, I have the following config: 1 PC with 3 NICs, that shares internet connection to LAN. eth0 uses a public IP ($public_ip_1) eth1 uses a private IP ($private_ip) eth2 uses a public IP ($public_ip_2) I have a webserver and a mailserver accesible by $public_ip_1 (eth0) I have a LAN with all terminals using private IPs, and $private_ip (eth1) as gateway. $public_ip_1 and $public_ip_2 are from

>From this list I found that I could use SetGroup and CheckGroup to do what I wanted. But I'm not quite sure how I do it. The case is that I have 3 user groups, and one main group. The main group is for all the incoming calls from external phones. The main group should be allowed to have 3 calls at the time. The 3 user groups are internal groups that I want to limit by ony having one

I'm trying to get two linux machines with kphone-3.11 two communicate with each other over asterisk. I have them configured correctly on asterisk to use sip channels, but when I call from one phone to the other I don't any voice communication between the phones. According to the phones I'm connected, but according to asterisk, I get the following message: -- Executing

I have the following asterisk configuration (sip.conf) : [General] externip=82.79.81.3 localnet=192.168.10.0 localmask=255.255.255.0 [Phone1] type=friend host=dynamic nat=yes qualify=yes context=sip callerid="Phone1" <1> disallow=all allow=gsm [Phone2] type=friend host=dynamic qualify=yes context=sip callerid="Phone2" <2> disallow=all allow=gsm [Phone3]

Dear all, I've been taking my baby-steps toward setting up an Asterisk phone system in my office, as also between my home and office (connected by DSL). I'm have a rough time getting two * boxes talk IAX over a LAN. I don't know what I am doing wrong, but am attaching my iax.conf and extensions.conf on both the boxes. Does anyone see it? ------config files start------ site-0

Hi, all I have couple of SIP phones and they are in [from-sip] context. I also have an IAX2 phone. I have put this one in [iax-user] context. I want to make calls between SIP and IAX2 phones. If I put them all in same context all is fine, however when they are in different contexts they will not call each other and I will get message (in * CLI) that particular extension does not exist in a

Hey guys, I'm looking for a programming or Development Team/Company to do some custom coding for Asterisk. What we need is not exactly simple. In fact, I'm not sure the extent of the coding as far as technical terms go at all. Currently we have a "call center" with 4 phones. There will be a total of 8 people using the phones. Obviously, no more than 4 people will use

Hello. I have another issue. When I call in, everything is processed correctly, including voicemail, but I don't hear any ringing/ringback. exten => s,1,Zapateller(answer|nocallerid) exten => s,2,NoOp exten => s,3,Playback(pls-wait-connect-call) exten => s,4,Dial(${PHONE1}&${PHONE2}&${PHONE3}&${PHONE4},15,Ttm) exten => s,5,Answer exten => s,6,Wait(1) exten

Dear All, I have been running an Asterisk 0.7.1 (patched with various agent applications) server for almost 2 years. We have a data center in the USA and a call center in the UK. All calls are routed to a group of central call queues in the USA. Agents from the data center, call center and from remote locations (London, Scotland, LA, Florida, and Maine) can log in, join the call queue and pick

Hi all, I've been running Asterisk with a TDM400P for about 6months, no problems. 2 in/outgoing analog lines, one analog phone. Recently I was messing with the XTEN client, got to finagling with things, and not knowing what was wrong I upgraded from 1.0.7 to 1.0.9 (both asterisk + zaptel). I was testing various things, and found everything worked except outgoing calls. So I checked

I'm having trouble getting festival to work with asterisk. We are running debian (sarge) and got asterisk from CVS. Here's what I'm using as far as festival goes. Debian (Sarge) gcc version 3.3.4 (Debian 1:3.3.4-3) Connected to Asterisk CVS-HEAD-07/28/04-21:08:19 festival-1.4.3-release.tar.gz speech-tools_1.2.3.orig.tar.gz I got patches for both of these. Speech tools

My analog card, uses a PCI slot and a 12V power connector, is configured with 2 FXO and 2 FXS modules. I can ring handsets connected to the FXS ports but I can't dial out from them. Is extensions.conf where I need to make changes? [root at robin asterisk]# cat chan_dahdi.conf [trunkgroups] [channels] [phone](!) usecallerid = yes hidecallerid = no callwaiting = yes usecallingpres = yes

Hi, I've been playing round with Asterisk on Redhat 9 (2.4 Kernel) and was experiencing bad echo problems using Budgetone 100's when calling analogue lines in uk (Isdn4Linux / Digi Datafire). Calls to other ISDN and mobile network seemed ok although not much testing done. I've tried installing Asterisk on a faster processor (P4 3.0 GHZ) with a 2.6.8-24 kernel to see if that helps.

Hi, After reading this valuable forum and the voip-info wiki and follow all the steps , but my Cisco 12SP+ remains unregistered. These are my config files: skinny.conf [general] port = 2000 ; Port to bind to, default tcp/2000 bindaddr = 172.20.1.1 ; Address to bind to dateFormat = D-M-Y ; M,D,Y in any order (5 chars max) keepAlive = 120 languaje=es allow = all ; disallow

I'm new in hire so Hello to everyone! I'm beginner user of Asterisk CVS-HEAD-10/01/04-14:31:34 . I just installed it on my Mandrake Linux 10.0 kernel 2.6.3-4mdk with sample configuration (used make samples). I would like to make phone connections between X-Lite (SIP) installed on computers in LAN. How to make this? I was reading manual, and tried to make changes in sip.conf but this all

I have an X100P used, at present, largely for outgoing calls. It shares the single incoming POTS line with a number of analog phones. Is it possible to talk the X100P (Zap/1) to answer a ringing call only if I ask it to? I'd like to use only the SIP phone in my office, but let the analog phones continue to work in the rest of the house (until I can afford FXS cards anyway..) I can force

I've got asterisk able to make and receive calls via the Internet via E164 lookups. If I get such a call - I'd like to display the original phone number on my phone. In the log is the following - which displayed '601' on my phone. The caller was +886288097680 - am I getting the wrong ClID because of my end or the caller end?

Hi all, I have two static IPs from my ISP. I would like one of these IPs to be directed to my desktop box all the time, and the other to be directed to a DHCP-served NAT network. I''ve nearly gotten it working using iptables and iproute2, but one problem is that i would like packets coming from my desktop box via the firewall to be printed with my desktop''s external IP. They are

Hello everybody and merry xmas. I have a problem with sip phones calling each other inside the same network (no nat, no firewall). You can make and receive calls and pick them up, but you cannot hear anything on any side of the call. But if you press hold/unhold or you transfer the call, then everything works as expected. Ths SIP phones I've tried are Swissvoice IP10s and kphone, it