similar to: asterisk@home print incoming fax

Does anyone know of any obscur reference for detecting an incoming fax. I currently have AMP running and everything else is working great. Installed the spandsp patches and software... using the default AMP extensions.conf, I start sending a fax, I hear it pick up and transfer to voicemail after 20s. Fax is set for system... Here is the detail from the extensions.conf [global] FAX_RX = system

Hello Guys, I'm somewhat of a newbie and am desperately seeking for some help... I've managed to get asterisk up and running on my server, and signed up with a broadvoice account... I'm having no problem dialing and communicating between extensions, but whenever anyone tries to call my broadvoice account, they are greeted by no ring or anything, but rather simply a direct to

I have an X100P clone hocked up to an analog line of my PRI. I can use it to dial out. but when I call the extension it answers and says "GOODBY" I have a Livevoip DID which successfuly rings to ext 202 I am using asterisk@home and through the AMP inface the line should ring to ext 202 Below are Asterisk Messages, Extensions.conf and Extensions_additional.conf Extensions.conf

I am having a strange problem. On one * box I setup the fax recive, via spandsp -app_rxfax I have no problem here. On a second box I did the same. The resulting PDF appear "corrupt". If I transmit the same fax to both * box, the tiff files received are the same. A deeper analysis shows the only problem is the width and heigth of the document In the first PDF, I see

How many times do you ask for help here before getting a respone? Every single thing I do No matter what I get busy extensions. I am willing to pay someone to help here. Anybody got a clue? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050802/d0d1326c/attachment.htm

I've upgraded Asterisk from CVS, spandsp and app_txfax and app_rxfax but i'm still unable to send/receive faxes :-(. I'm using amp_fax to send and this is what i get from logs: Sep 6 11:02:52 VERBOSE[10750]: -- Attempting call on Zap/g1/666 for application txfax(/var/tmp/ast_fax-1125997371.10240.1804289383.0|caller) (Retry 1) Sep 6 11:02:52 DEBUG[10750]: Dialing

Hello All, I am trying to set up faxing using Asterisk@home 0.6. I have followed the instructions to the best of my knowledge. When a fax comes in, the system seems to detect OK but does ot manage to make the fax to pdf to email leap. Here is what I saw in the CLI when I tested. Any help would be appreciated. Thanks! Wiley -- Starting simple switch on 'Zap/2-1' -- Executing

I'm using Slackware 11. I unistalled the package that provides libtiff 3.8..... and installed the most current 3.7.... for lib tiff. I downloaded asterisk 1.4 beta3 and the 1.4 beta2 addons and untared them. created a simlink: ln -s asterisk-1.4.0-beta3 asterisk I've compiled spandsp from as follows cd /usr/src wget

I'm having a problem receiving incoming faxes and I'm hoping someone here can help me out. My system is a PBX in a Flash with one dahdi card for my incoming analog lines and another dahdi card for my analog devices (fax and modem). My dahdi-channels.conf file looks like: ; Autogenerated by /usr/sbin/dahdi_genconf on Tue Jun 23 14:56:24 2009 ; If you edit this file and execute

Looking for someone with a successful experience similar to this; I have a need to cross connect a 3COM NBX PBX PRI interface to asterisk, but over a long distance. We do not need any IP connectivity and the solution requires G.711u audio so there is no benefit to using IP. Has anyone here successfully cross connected any PBX PRI interface expecting NI2 PRI signaling B8ZS/ESF with an

Hello, I think you should handle the fax in the h (for Hangup) extension (which is, after your fax was received), instead of using the priorities following the fax reception (as in your example). Have a look at the different examples in the wiki, like http://www.voip-info.org/wiki-Asterisk+fax: [fax] exten => 666,1,Macro(faxreceive) exten => h,1,system(/usr/sbin/mailfax ${FAXFILE}

Hello everyone, Ok. I am at a bit of a loss.... and would like someone to point me in the right direction...(btw www.google.co.za did not give me ANY solutions). The issue at hand is simple, I get asterisk (1.0.9) to answer the incoming call with no problems... it does the fax detection thing with app "Answer" and well it goes to the perfectly right context and sets the varibles

Hello, Is there or can anyone provide a comprehensive guide (designed for Linux/Asterisk novices) to installing/setting up Asterisk in order to support Fax2Mail service? In my case, I would like Asterisk to receive fax calls to predefined numbers (ranges) and to associate each of these numbers to email addresses. Thank you in advance. David --------------------------------- Yahoo!

Hi, I have configured an Asterisk server with TDM01P (1FXO) for testing purpose. The interface I'm using is AMP. I want to configure my extension so that when I dial from my mobile phone to the asterisk line, I want it to transfer the call to any extension, say 3042 and after a particular number of rings, transfer the call to voice mail so that I can record my message. My Zaptel.conf is as

Hi all, I'm using txfax and rxfax to send and receive faxes. I find that txfax performs very well when sending to an old fax machine. However, when trying to send to a Mac (OS X) that accepts faxes, I get a "Trainability test failed" message on the * console (full console log below). I'm OK with being unable to fax to Mac, as I'm just using it to test. For future

Hello, I'm using asterisk-1.0.8 with BRI and spandsp-0.0.2_pre20. Modules app_txfax.so and app_rxfax.so are compiled and loaded sucessfully. It seems that the channel cant't detect the call as a fax-call 7612022801 is the calling faxmaschine 1209259 is my recieving fax extension logs are:

Sorry in advance if this is a FAQ... I've got a working Asterisk setup based on A@H 2.2. I have a TDM400 card with 2 FXS and 2 FXO ports; PSTN connections come in via the TDM card. I haven't been able to get inbound fax with spandsp and rxfax to work. Occasionally an all-text fax will come in, though it's usually badly corrupted, but in most cases, it would appear that the call is

Hi, I am using asterisk 1.4.28 with freepbx and Wildcard TDM410P card. Everything is working fine except the caller ID of incoming call from PSTN line. The phone display is showing "Unknown" when there is an incoming call. *My log file showing this while an incoming call on PSTN line:* tail -f /var/log/asterisk/full [Dec 30 06:36:16] DEBUG[2559] dsp.c: dsp busy pattern set to 0,0

Hello, I have spandsp setup to accept incoming faxes and receiving tif files via Email. Using tiff2pdf, or tiff2ps -a2 or even tiffsplit, the last page of the fax is cut off and the quality of the text looks "squished". I "figure" it's a tiff parsing thing, as opposed to a problem with my spandsp installation (heh). Has anyone experienced the same thing, or can

I never did see this get to the list. Tim Litwiller wrote: > For my church school we need a way to connect 3 room phones, 1 office > phone and 2 phone lines. > so I need a device or several that i can connect to 2 pots phone lines > and at least 3 plain old wall phones. I'll donate a sipura 941 for > the office. > > What would be the best product to get 2 fxo ports