similar to: help with registration

Hi all, I have installed X-lite client on a windowsXP machine and asterisk on an enterprise linux m/c. The client is sending a registration message to asterisk server. It is able to process the message and sends 200 OK back. But later it says "Scheduling destruction of sip dialog xxxx ". Then it says "Really destroying sip dialog xxxx". What to do for this problem??? I

Hi all, I am using asterisk1.2.14,realtime and I find there is a strange case in the receiver's display. I have a dial plan to route a call to the destination. I haven't set the callerid(num) for the caller. In the receive ends, it's display shows "asterisk" when I make a call to the receiver. I wonder why "asterisk" shows in the display as I haven't set

Hi, Recently we got a new feature request from our customer, they want a report to list the duration that agents putting customer on hold, they want to base on this to measure the agents performance. I cannot find any events in cdr, message logs, or manager interface, only when I enable sip debug, then I can see the ReInvite Event in the cli , some thing like the attached logs, is there any

Hi, I've been doing some testing on moving from 1.2 to 1.4 and one issue I've encountered is re-transmits whenever an INVITE is cancelled. I have a stateless SIP proxy in fron of my asterisk servers (all it does is direct requests to one asteisk server or another) and the re-transmits do not occur on 1.2.17 which is the current verion I have in use on my production servers. The

I have a new asterisk install (1.0.7) - and in case it's relevant I'm not using autoload option in modules.conf. Generally all is working well. However, when I make a call from my softphone and try to leave a message, the message is cutoff after a few seconds (whenever I pause for 1 second between words). Strangely, when I use an analog phone connected to my ATA, I can record as long as

I set up my * server using its publc IP address. Now that i switch over to using the domain name, X-Lite can't log in. =========With Domain Name (doesnt work)============ Transmitting (NAT) to 85.250.206.46:6007 <http://85.250.206.46:6007>: SIP/2.0 401 Unauthorized Via: SIP/2.0/UDP 85.250.179.93 <http://85.250.179.93>

Hi; I am running asterisk 1.6 from Fonality (Trixbox PRO). I am trying to initiate a call FROM a softphone client to asterisk (either an internal 4 digit extension call) or an outside line via a SIP trunk. In both cases, asterisk rejects the call with a 420. In this case, it?s a call from x3992 to x4415 Does this require a change on the softphone for x-call-detail? <--- SIP read

The SIP trunking service that I am trying to set up keeps saying that my registration from Asterisk is invalid. Asterisk registration: REGISTER sip:{registration_ip} SIP/2.0 Via: SIP/2.0/UDP {asterisk_ip}:5060;branch=z9hG4bK5c2eb10c;rport Max-Forwards: 70 From: <sip:{registration_user}@{registration_ip}>;tag=as5579cc0c To: <sip:{registration_user}@{registration_ip}> Call-ID:

Hi list, How do I make Asterisk 13 (using PJSIP channel) to handle PUBLISH sent from the phones? The trace looks like: ## PHONE -> ASTERISK ## PUBLISH sip:1001 at example.com SIP/2.0 Via: SIP/2.0/UDP 172.31.19.250:2048;branch=z9hG4bK-w2orn21sre9u;rport From: "1001" <sip:1001 at example.com>;tag=98slbhbn16 To: "1001" <sip:1001 at example.com> Call-ID:

REPOSTED with MORE Info and Modified Subject Line: -------------------------------------------------------- I am using one of the Minute Provider to dial out USA numbers. Now in one of my process, we need to Dial IVR and the enter DTMF digit and then it connects to the automated IVR. When I dial out the IVR directly using Xlite and VOIP Mins provider , it works perfectly. but when In try from

I've been struggling with a Trixbox running Asterisk 1.6 for one of our customers as of late. The service provider in question is using BroadWorks and requires a single trunk registration for the trunk group. We have 4 users(lines/numbers) in the TG. The sip trunk is setup as follows: type=peer host=192.168.1.1 fromuser=<tgid> fromdomain=<sip domain> dtmfmode=rfc2833

Can anyone tell me why my inbound calls keep getting rejected with 401? Here's the debug information: <--- SIP read from UDP:147.135.32.221:5060 ---> INVITE sip:6087294351 at 216.26.109.22:5060 SIP/2.0 Call-ID: 31007e-31 at 147.135.32.221 CSeq: 1 INVITE From: "Wi M"<sip:4144038968 at 147.135.32.221;user=phone>;tag=9bbc To: "Gregory Malsack"<sip:s at

Thank you Joshua. I tried setting the from_domain for the endpoint, but it still sends the internal ip address for the INVITE's From field [acl1] type = acl deny = 0.0.0.0/0.0.0.0 permit = variousaddress permit = bluipaddress [transport1] type = transport bind = 0.0.0.0 protocol = udp [BLUIPIN] type = aor remove_existing = yes contact = sip:bluipaddress [auth7] type = auth username =

Hi list! I'm trying to get a DID routed to me and the provider seems to have an unusual setup. Or maybe not? From looking at their SIP header they are using "BroadWorks". The problem: they're sending their SIP invite from port 36252. My Asterisk 10.7.1 is answering to that port 36252 but their BroadWorks thingie is not listening on that port, but instead on port 5060. So

Surely there must be someone here who can help me with this problem. I have spent weeks trying to get this damned service to work with no luck. I have incoming calls working, but no outgoing. If get outgoing working then incoming don't work. I have sent this problem to this list a couple of times with little or no response, and I _really_ need some help to sort it out. I have an asterisk

??? I am having a really bad day trying to get incoming calls to work on Asterisk 13 with PJSIP.? We just migrated from Asterisk 1.8 where everything was working but there seems that something got lost in translation.? No matter what I try I always get a 401 Unauthorized message when receiving a call from the PSTN provider.? I can make calls and the registration is working.? I have tried to

Like everyone else who used asterisk with broadvoice, my outgoing calls died last week. I made the appropriate changes, and now basic incoming and outgoing calls are working. However, I have a few call-forwarding rules that are no longer working. It's certainly no coincidence. I can dial to all these number directly, but the problem only appears when there is an incoming broadvoice call, and I

I have been going crazy with this also since Sat. Our server was working perfectly with BV but will now not place calls to BV. Incoming from BV works fine. I felt sad rebooting it today, it had been running for almost 200 days! Here is my error message from the console... Notice I am running today's CVS Connected to Asterisk CVS-03/08/05-14:32:39 currently running on com (pid = 1624)

Hello, Have a weird problem when using asterisk (1.0.6). There are certain numbers I cannot dial when using asterisk with my broadvoice account. No problems with inbound. With outbound calls, I can call some numbers (for example broadvoice customer support number) and unsuccessfully with some. However, when I configure my account directly on x-lite, I dont see these outbound problems. Here is a

Hello everyone, Well here is my initial posting to the list, and I will admit Asterisk is new to me. I just got everything running here a couple days ago, so still learning the ropes for sure. OK, here is my problem. Currently I have it setup talking to a couple Cisco IP phones, and some Xten softphones, this works great. I also got an account with FreeWorld Dialup using IAX2 and that