similar to: Modify CallerID (on SIP phone) during call

Hello, I've added a ZAPHFC card to my CAPI based system. Calls coming in via ZAPHFC do not forward the caller id to the SIP phones. Calls coming in via CAPI do forward the caller id to the SIP phones. Any and all help is greatly appreciated. The (hopefully relevant) conf file excerpts are: extensions.conf =============== exten => 807440,1,Answer exten => 807440,2,Noop exten =>

I am having an issue with the CallerID Number not being passed to my phone in the SIP packet. The CallerID Name is passed just fine and displayed on the phone with no issue. I have done a NoOp() in my extension.conf and successfully seen both the CallerID name and number correctly. So that leads me to believe that Asterisk is handeling it correctly. However, when I do a packet capture of the

I'm looking to send calls to a phone with no callerid data whatsoever shown on the Polycom as far as missed call. The specific application for this is that I have a 50 phone install with some being used for paging. Paging works perfectly, but the problem is that for every page there is a "missed call" shown on the screen. I have access to the Polycom phone.cfg file, and

Hi! I trying to configure * in a way, that it uses a different CLIP (Caller-Id in ISDN) per SIP user, when relaying the call from SIP to the ISDN. So far always the main (1st) number of the number-block is sent to the ISDN. I have a E100P from Digium and use the zapata stuff (chan_zap). All SIP calls are coming through an SER. One idea I had in mind is to assign userid's in SIP, that match

Try commenting out the line pritrustusercid = yes Or set it to 'no'. That worked for me. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Jens Sent: Friday, January 21, 2005 7:18 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] zaphfc no callerid

Hi, I have two asterisk servers with the same version of 1.4.29.1. The first server named it as MYE1. MYE1 is an incoming server that can accept incoming calls from PSTN(ZAP E1). The second server is a pbx functions server and named it as MYPBX(SIP). The sip.conf of MYE1 likes below: [MYPBX] type=peer host=mypbx.abc.com nat=no disallow=all allow=g729 canreinvite=yes qualify=no context=default

I have some phones (and an ATA) that are shared between two users who each have separate voicemail but they are not behaving as desired nor expected. Incoming calls show up on the correct lines. Calls originating from the device are seen, at the terminating device, as coming from the account listed last in sip.conf, regardless of the line selected. This creates three main issues I would like

Hi, I feel I've read a thread about this previously but I couldn't find it. Is there way for an Asterisk server to check if a sip phone is forwarded without bothering phone's user ? I was thinking of some Alert-Info option that would let the phone reply with a 302 Moved Temporarily or 182 Queued message and not let the phone ring or display anything on its screen. So that, you could

Hello again Asterisk people. I am running Asterisk 1.42 on an old PowerPC ibook. I have had this deployed for several years now, with pretty good results. Recently I added a callerid service to my landline (qwest). I am using the audiocodes MP114 2fxo/2fxs gateway, which is an outstanding piece of hardware once it's configured (lol). Anyhow, I can see that the gateway is passing

Hello all, I'm having a problem with getting incoming callerid to a lan-connected phone. The Asterisk server is connected to the Internet, and a Grandstream BT101 phone on a lan interface: INTERNET ----(eth0) Asterisk (eth1) ---- Grandstream (192.168.1.51) The phone registers with the Asterisk server as ext 20. I can initiate and receive calls from the Grandstream phone fine. The

Hi All, I have a server setup with an incomming PSTN line and a bunch of Grandstream BT100 phones. Is there a way for asterisk to foward an incomming callerID from the PSTN to the SIP phone that is setup as an extension? We have a Voice menu setup for incomming calls and I would like to recieve the caller ID of the calls we are recieving after the incomming caller reaches their final

I have 2 sip accounts setup - 200 and 202. If I do sip show peers I get: sip show peers Name/username Host Dyn Nat ACL Mask Port Status 202/202 192.168.0.6 D 255.255.255.255 5060 Unmonitored 201/201 (Unspecified) D 255.255.255.255 5060 Unmonitored 200/200 192.168.0.3 D 255.255.255.255 5060

Hi all, Several years ago there was a thread on this list about the behavior of Asterisk when there was an empty display-name field in the SIP FROM header: http://www.mail-archive.com/asterisk-users at lists.digium.com/msg142835.html It seems as if the thread was not answered, so allow me to scratch the scab off one more time :) Is it possible to configure Asterisk to not modify the

We have several customers we need to place outbound calls for (in a single system). May have to place calls for thousands of different caller ids. Customer signs a contract guaranteeing the caller id they provide is owned by them. I have everything setup for AMI Originate and can place the calls. However, I'm encountering a problem with the caller id. The system I'm dialing through

I am trying to setup one time caller id block on my system(activated when an incoming call matches *811XXXXXXXXXX), and I have had little to no luck. Could you take a look at my context/macro definition and help me figure out what I am missing? Here is my context for my dialplan: include=default plancomment=user-default

Hi, I have this scenario Cisco 5300 (public ip. 200.47.xx.xx) <---> Asterisk (public ip: 64.76.xx.xx) <--> Cisco 3600 (public ip: 64.76.xx.xx , same network than * ) When a calls comes in Cisco 5300, this send this calls with SIP to *, asterisk plays a welcome message and resend call to Cisco 3600 that have 4 analog lines connected... but after cisco play welcome message and when

Hello gentlemen, I am new here. I have a D-Link DPH-80S SIP phone (it's a non-US model), and I am trying to make it work with Asterisk. I tried versions 1.0.7 and yesterday's CVS and the behavior is the same. The phone registers with no problem, and can accept calls. But when I try to make outgoing call, there is a series of invite requests from the phone, to which asterisk responds

Hello, does some people here use https://voicetrading.com which is a Dellmont service from Netherlands. At the high begining they were also known as Finarea (CH and DE mixed Co) Anyway, after moving from Asterisk13/chan_sip to Asterisk16/PJSIP our callerID is no more seen by them. We use Set(CALLERID(num)=+331234356789) and Set(CALLERID(name)=Co name) or equal to CALLERID(num). We tried

This is what i found on Cisco's site: "Symptoms: Media negotiation fails for SIP calls and the terminating gateway replies with a "488" message to an Invite message. Conditions: This symptom is observed on a Cisco platform when the terminating gateway is configured with the G279B (annex B) codec and when the Session Description Protocol (SDP) for the incoming Invite message

i have a prablom here, i want to send a call from A to B use sip trunk , the call can sended B,but not work to PSTN. the message from B server. help pls,what's rong? > > <--- SIP read from 192.168.0.176:5060 ---> > INVITE sip:15921256331 at 192.168.0.151 <sip%3A15921256331 at 192.168.0.151>SIP/2.0 > Via: SIP/2.0/UDP 192.168.0.176:5060;branch=z9hG4bK51a51b96;rport