similar to: req: cisco 12sp+ firmware

Hello all, I am trying to upgrade the firmware on my cisco 7910 without using CCM. I was told that chan skinny is possibly capable of doing that and would like to make sure. I have P00405000600 firmware which I have put in version in skinny.conf. the phone basiclaly stops at verifying load. tcpdump shows nothing happening apart from small amount of traffic to port 2000 (skinny). Does anyone

does anyone have a running cisco 12sp+ or 30 vip phone on their network? and if so could you also tell me what tftp files you actually use and if there are any special settings in skinny.conf that i need? (I ran several searches for setup, nothing has come up so far so i'll ask for advice now.) Thanks Rohde -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, After reading this valuable forum and the voip-info wiki and follow all the steps , but my Cisco 12SP+ remains unregistered. These are my config files: skinny.conf [general] port = 2000 ; Port to bind to, default tcp/2000 bindaddr = 172.20.1.1 ; Address to bind to dateFormat = D-M-Y ; M,D,Y in any order (5 chars max) keepAlive = 120 languaje=es allow = all ; disallow

I have been looking for the firmware for the 12sp+ and 30VIP and have been unable to find it. Any help in locating would be much appreciated. Thanks ======================================================= This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error

I've searched high and lo and googled to I can't google no more... I knew that Cisco bought Selsius to get their VoIP solution but what I didn't know was that the 12sp+ is based upon an ITE-12 product that is apparently used at universities. I've taken two of the phones apart and started swapping parts and have looked up the IC's on the Internet... Anyway... After using

I would like connect two offices where one office have 4 PSTN Analog lines and another office without any PSTN. Both the offices will have two separate Asterisk server with TDM400P cards (4 ports FXS & FXO). My questions is that how to configure Asterisk to forward the PSTN calls directly to another Asterisk which has the TDM400P card without pressing the extension number. Diagram like

If you have been paying attention, you already know this, but this weekend I have spent time ironing out the various details with my chan_skinny code that has been out there, if you knew where to look. I believe I now have all basic features operational and am going to be working on getting the class 5 (hold, transfers, call waiting and caller*id, etc) operational in the comming week(s).

Hi, I'm thinking about getting a couple of Cisco 12SP+ phones to use on my Asterisk system. I have just bought a Cisco 7960, and they are great, but too expensive to buy a lot of them, so I though I might try the 12SP+ ones. I have seen in the archives that the phones work on Asterisk, but I can't see much in there about the images in use. When I got my 7960, it had the call manager

I'm really trying to understand this. I have a Sipura 2000, brother MFC, and SpanDSP set up on asterisk. because asterisk softfax was not working well, i set up faxes to goto line2 on the sipura. this is working fine, i have only tested a few short faxes, but already my completion rate was 100% vs 5-10% that spandsp and asterisk gave me. here's the odd part. using the fax machine, I

Hi folks, I have got a Cisco 12SP+ working (thanks Derek!) but I'm having a minor issue with it. When I use it to call another desk I get no CallerID. The receiving phone diplsays "asterisk" as the CID. Below is the skinny.conf stanza. [2207] device=SEP00308062B006 version=P002L2J2 context=intern callerid="Luke's Room" <2207> mailbox=2207 transfer=1

Hi, I have a Cisco 7920 that I'm trying to get working with my * box. When the phone boots it requests XMLDefault.cnf.xml and SEP<MACADDRESSHERE>.cnf. I assume I set the line number, etc in the latter of the two. However I cannot find any reference to how this file is structured. Anyone know? I assume this is why I'm getting the errors below: Oct 17 19:47:24

Lacy's response in the thread 'Why does everyone seem to dislike *now?', has a small bit that caught my eye. Chan_Skinny made a lot of progress between 1.2 and 1.4, and even more in the later 1.4.X releases. I am curious as to which features/functions that chan_skinny might be lacking compared to chan_sccp. We (the community) now have a small, but active, group of volunteers

Hi I have problem with Asterisk an 12sp+ phone. Asterisk's skinny implementation doesn't correctly processes 'onhook' event from phone, so voice channel stays opened and no new calls can be received by phone. What i'm doing wrong? :) -- Denis Chapligin

I was able to get Asterisk working with the demo on FreeBSD 5.3 without crashing, but not the music on hold, so I just have that disabled for now, but I'm ready to get some IP hardware working. So I picked up a Cisco 12sp+ IP phone (mistake?) and am having difficulty finding any truly helpful instructions / troubleshooting to get this configured to work with asterisk. If I could just get

Does anyone know how to get any of these VOIP phones to allow me to do menu selections through asterisk, like when accessing voicemail and such. Thanks :P --

Hi, I've managed to acquire a few Cisco handsets (7905, 7920) and would like to use them with Asterisk. Rather than simply switching to the SIP firmware I thought I'd use these with chan_skinny - partly because this is Cisco's primary firmware and therefore the phones might be more stable, and partly to help test chan_skinny as it seems to be generally underused. (Is functionality

has anyone seen this? -- Starting Skinny session from 192.168.13.102 -- Starting Skinny session from 192.168.13.102 triton*CLI> Oct 15 13:44:05 WARNING[213019]: File chan_skinny.c, Line 2243 (get_input): Skinny Client sent less data than expected. Oct 15 13:44:05 NOTICE[213019]: File chan_skinny.c, Line 2301 (skinny_session): Skinny Session returned: Success Oct 15 13:44:05

I've added lines like this: speeddial = 123,test speeddial = 260,Bob in the [device] section for my 7921, but the speed dials do NOT appear on the menu (click right from the main screen). Am I missing something obvious here? Thanks MD -------------- next part -------------- An HTML attachment was scrubbed... URL:

How do I disable chan_skinny and chan_oss? I think chan_skinny is associated with Cisco hardware, since I don't have any I don't need this channel. I just want to get rid of those warning messages at start up. -- #Joseph

Hi all: I've got some core dumps with chan_skinny. The client is ATA186 with v2.16.1.ms ata18x (Build 030814a). The * version is CVS-10/05/03-16:03:26. When I make a call, the phone connected with ATA rings only 1 time and * dies. Maybe I have some errores in ATA config. If someone has proven configs for ATA, please send me the details. Thanks in advance, Gus The logs: *CLI> Version