similar to: current asterisk cvs problem with distinctive ring?

Hello, I tried to configure a cisco 7905 IP phone using the skinny channel but I had not much luck. The relevant portion of skinny.conf is: [cisco1] device=SEP000F3487F8E3 callerid="Alex" <123-456-789> mailbox=500 callwaiting=1 transfer=1 context=default threewaycalling=1 line => 500 ; Dial(Skinny/500@cisco1) I set up the tftp server, and prepared the following

I am looking for clues on how to configure distinctive ring for a PolyCom SoundPoint 300. Does ALERT_INFO apply? If so, how? Thanks, David Koski david.nospham@kosmosisland.com

Greetings, I am trying to implement distinctive ringing on a Cisco 7960. I have tried setting alert_info to chirp1 or chirp2 before dialing the phone, but it has no affect. If you have successfully implemented distinctive ringing on a 7960, I would really appreciate seeing the snipit of code that works. Thanks in advance Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775)

Hi Can anyone with distinctive ring on their 7960's possibly post how they've got it to work? I understand that the ALERT_INFO variable is involved but using the examples for the variable value from the WiKi I'm just getting an error message from the Asterisk concole. Thanks in advance. P

I'm new to Asterisk, but, Managed to get it working for outound calls from my ATA --> Asterisk --> Cisco 2620 using SIP. However, I'm having problems with Inbound calls from the Cisco.. Cisco 2620 --> Asterisk --> ATA .. In fact, voice mail won't even work.. This is a snippet of what I'm getting when I try to call the ATA -- Executing

Ok here is another problem I have run into. I have a Sipura 2000 and I have been able to configure line 1 with only one small problem. But I can't get the line 2 working with asterisk. Here are samples of my sip.conf and extensions.conf. If I disable line 1 I can then get line 2 working. Is there a sample configuration for the Sipura to get both ports working with Asterisk. Sip.conf

Hi, I'm using asterisk 1.2.1 on a debian sarge distro. I've followed notes in http://www.voip-info.org/wiki/view/Polycom+auto-answer+config and http://www.voip-info.org/wiki/index.php?page=OptiPoint+600+SIP+-+Distictive+ring+using+ALERT_INFO but I still cannot change ring style via asterisk using exten => 666,1,SipAddHeader(ALERT_INFO="ring3") in extensions.conf . Is it

Russell Bryant wrote: > Greetings! > > Version 1.0.8 has been released of Asterisk, Asterisk-addons, Zaptel, > and Libpri. This release contains a significant amount of bug fixes > (possibly the most of the 1.0.X releases). Tarballs are available on > the asterisk web site as well as the asterisk ftp server. Thanks! I appreciate the effort you put into these releases.

I am wondering if there are any tricks getting the Cisco ATAs to do "distinctive rings" via the ALERT_INFO variable? I have seen some contradictory information in the Wiki, and I tried the example there. I then sniffed the connection between the server and the ATA and didn't see the header sent like it is "supposed" to be. If someone out there has a handle on this and

Does anyone know of a way to setup distinctive ring in * for a Grandstream BT 101? I'm attempting to setup a way for users to distinguish between external and internal calls. I've tried ALERT_INFO with no success. Thanks, Mason Herring Director of Engineering Delta Signal, LLC -------------- next part -------------- An HTML attachment was scrubbed... URL:

I use the following macro for my extensions. It only works with Zap channels and assumes that any Caller*ID number that is 4 digits is an internal call and all other calls are external calls. Use like this: exten => 1234,1,Macro(std-exten,Zap/4,20) [macro-std-exten] ; ; Caller*ID is 4 digits (internal call) ; exten => s/_XXXX,1,Dial(${ARG1}r2,${ARG2}) exten =>

I have a new asterisk installation (1.4.2) that is working fine with SIP. Now I'm trying to add 2 cisco ip phones (7960) running SCCP (latest chan_sccp). I have the phones booted, and the tftp directory all setup, etc. But the phones do not quite work right. When I lift the handset I only get a dial-tone 1 out of 5 or so times I try, though hitting the speaker button works. I can dial

Hey all, Anybody been successful running DHCPD on a GRE tunnel? When I tell DHCPD to listen on cisco1 I see this in the log Jul 23 16:21:03 atlantis dhcpd: cisco1: unknown hardware address type 778 Here is the output of ifconfig cisco1 Link encap:UNSPEC HWaddr 8B-8E-28-32-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.199.0.2 P-t-P:10.199.0.2

I am trying to get distinctive ringing going again with these phones, depending on the outside line the call comes in on. I had a working 1.0.x Asterisk setup using: SetVar(ALERT_INFO=<http://127.0.0.1/Bellcore-dr2>) Which used the short quick rings. In Asterisk 1.4, I have tried several things, but I think the correct syntax is: Set(_ALERT_INFO=<http://127.0.0.1/Bellcore-dr2>) But

Hi Everyone, Using Elastix (FreePBX + Asterisk 1.4.2x combination) with Aastra phones, how can one receive distinctive ring tones for INTERNAL calls ONLY? Even though FreePBX Inbound has an option for Alert_INFO but that doesn't work when the call comes into an IVR or Queue. The calls has to go directly to extension for external ringtone to be different. So, I am looking for internal calls

Hello List, So I have a few MiTel 5224 IP phones running in SIP mode. Per the phones documentation they honor SIP distinctive ring tones. I am able to send the correct ALERT_INFO message in an invite from Asterisk to the phone, but I don't know what ring tone to call. From the reading I've done the syntax is: [3155791234] exten => s,1,Set(_ALERT_INFO=Ring 8) exten =>

Hello, I've got my dialplan configured to do a double ring when a customer service call comes in, and a normal ring when an extension is dialed directly. When a customer service call is transferred, I want to ring to revert back to normal. In the local extension macro, I have the following ; make sure ring is set to default exten => s,n,NoOp(${ALERT_INFO}) exten =>

I'm having a wierd problem with a Cisco 7960 (sccp2) and asterisk (1.4.2) If the call that I'm trying to make goes through, everything works fine. But if there's any sort of error (like me messing around in my extensions.conf, etc). I can't get the connection to drop. ie: If I get the conjestion tone and hang up the phone, I can do a sccp show channels I can see that the

Does anyone know how to set the distinctive ring on the Linksys SPA941? I want to be able to dial one extension and have the phone ring with a certain tone and then dial another and have the phone ring with a different tone. I have tried the following ------------------------------------------------------------------- exten => 802,1,SIPAddHeader(call_info=Classic-4) exten =>

----- Original Message ----- From: allan d. go To: blue@bluepoint.com.ph Sent: Tuesday, October 29, 2002 8:54 PM Subject: Samba PDC guys, i'm configuring a Samba Primary Domain Controller. i compiled the 2.2.5 version with ./configure --prefix=/usr/samba --with-quotas and followed the Samba-HOWTO-Collection I configured my Win2K workstation with the following parameters: