similar to: adding to asterisk db from a script

you can not ping that address because ICMP is turned off. -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com]On Behalf Of Deon Rodden Sent: Monday, July 26, 2004 2:22 PM To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] Broadvoice problems again Attn: James Greetings, C:\>ping 147.135.8.129 Pinging

How does one do translation for calls that come in from other pbx's where the incoming caller ID is an internal extension number on their pbx? Eg. when I get a call from Free-World-Dial the CID shows up as "429102" which is essentially their internal extension number sans any routing prefix. To dial the number back I need to dial the extension with FWD's routing prefix

Problem: *Call* *waiting* comes in, I press flash to answer it, and the first caller gets disconnected after 3 seconds. This is all ZAP - no VOIP. System: Analog stations and trunks running on a pair of TDM400's. It does NOT have * call* *waiting* from the phone company, and I have enabled it in all my conf files. The trunks are set to FXSKS and the stations are FXOKS. I am not using *call*

Hi everyone, I have a problem at my Trixbox that is version Asterisk "1.2.26.1 svn rev 79171" and 2.6.9-34.0.2.ELsmp kernel version. Two Digium 4fxs+4fxo card has been installed and everything was working before made yum update and at this server. (Centos 4.0). After update I faced with "zaptel not loading" problems. I have solved these problems too but now when I try to call

Hi Folks, I'm have Asterisk version 1.2.1 with a A101 PRI card. I'm working with the CLEC to bring up the PRI and inbound calls are hanging up at his end after a few seconds. I ran PRI debug but it only gives me minimal insight. " Ext: 1 Cause: Unknown (16), class = Normal Event (1)" He ran a trace and the only difference he is seeing is a "ISDN interface explicitly

Hi Peoples, Great day for the callingcard-fan ! Just a little mail to let you know that a new version of A2Billing 1.1 (Asterisk2Billing) is available! Many features have been added, lot of bugs solved and hundreds of good improvement made, so there we go -> http://www.asterisk2billing.org The key newest features : * Ecommerce product with API addons - Integration with OsCommerce *

Hello, I have setup a test server with asterisk/AMP and have several 7960's connected to it. The asterisk server has a public ip and all the 7960's are behind nat'd routers. When I try to call from extension to extension I get directed straight to voicemail. I do not have any cards installed and instead direct everything to an Ondo server. I have been told it's not an AMP

from extensions.conf: exten = _X.,1,Set(CALLERID(name)=${DB(cidname/${CALLERID(num)})}) I basically try to lookup the CLIP and attach a name for each inbound call. This works fine, except when I have just restarted asterisk - at which time I've more than once seen the message from the subject. As far as I can tell, with my Set(CALLERID), I should always have an argument in the DB

I setup my aah box with a sip trunk at irisxa.iristel.net Incaming it is ok but when I try to dial 8 and the nr where I want to call I get all line is busy. In my log I have these: Feb 22 14:33:04 DEBUG[3156] manager.c: Manager received command 'Command' Feb 22 14:33:04 DEBUG[3156] manager.c: Manager received command 'Command' Feb 22 14:33:19 VERBOSE[2721] logger.c: --

hi i've configured a TE205P on asterisk at home this is my zaptel.conf span=1,0,0,ccs,hdb3,crc4,yellow span=2,0,0,ccs,hdb3,crc4,yellow bchan = 1-15, 17-31 dchan = 16 bchan = 32-46,48-62 dchan = 47 loadzone = it defaultzone = it and my zapata.conf signalling=pri_cpe ; pri_cpe = PRI slave ; pri_net = PRI master switchtype=national usecallerid=yes hidecallerid=no callwaiting=yes

---------- In?cio da mensagem original ----------- De: asterisk-users-admin@lists.digium.com Para: asterisk-users@lists.digium.com Cc: Data: Mon, 12 Jul 2004 11:48:05 -0500 Assunto: Asterisk-Users digest, Vol 1 #4502 - 11 msgs > Send Asterisk-Users mailing list submissions to > asterisk-users@lists.digium.com > > To subscribe or unsubscribe via the World Wide

Nik, Just curious - what is your telco setup? Do you have PRI with the specified D channels? You need to make sure that your telco is set up to have the D channels on 16 and 47. When you first start Asterisk, or when you log on to the CLI, do you ever see messages stating the B channels are successfully started? Let us know. -MC -----Original Message----- From:

Hello Some of our customers bought a bunch of phone numbers whose prefix is the same, eg. 555-12xx -> 555-1200, 555-1201, etc. There's a telco name for this, but I forgot what it's called (think it's DID in ISDN.) To avoid having to input all those numbers in the DB in the cidname group, is there a way to have Asterisk translate any such number to the same CID name? I'm

Hello, I'm trying to fill CID data into the astdb using AsteriskWin32's asterisk.exe, to no avail: The batch file stops after the first line, and just waits: ---------------------------------------- rem c:\cygroot\mystuff>import.bat rem rem c:\cygroot\mystuff>C:\cygroot\bin\asterisk.exe -rx 'database put cidname 123 "My cellphone"' rem rem Asterisk module

Hi All, I'm looking for a way to filter the AstDB cidname family to show only those entries with a specified area code in the Asterisk CLI. If this were a SQL database it would be something like: SELECT number, name FROM cidname WHERE number LIKE '1234%' I've tried "database show cidname 1234*" and substituted "%", "$", "-" for the wildcard

Admittedly this is probably pretty stupid of me, but there are just some things I can't understand by reading documentation. Any suggestions or recommendations about how to handle my problem are greatly appreciated. I'm trying to achieve the same functionality as my Nortel PBX, without rewriting much 'C' code. In my dialplan I'd like to compare two variables as a means of

Hi All, I need to use partial matches on the CIDNAME family I have stored in AstDB. For example, an organisation might have several numbers with the same area code and the same first few digits: 1234 567890 1234 567889 1234 567824 ... I'd like to store these (e.g.) as CIDNAME/12345678* (where "*" is a wildcard) so that I can retrieve the organisation name from

Hi all, I tried to set the calleridname of an incoming call to get different incoming labels displayed for different incoming numbers. This does work for hidden number-calls so I can set the displayed CIDName on my cisco7960 from "CID withheld" to "abc CID withheld" If the incoming CID isn't hidden it works to use SetCallerID but not to change only the CIDName with

I've seen this question floating around, but yet to see any answers. PLEASE let me know if anyone has figured this out. I've got a SIP trunk between Cisco Call Manager 4.x (10.200.204.10) and Asterisk 1.4 (10.200.204.40). I'm trying to send calls from CM to Asterisk. It appears Asterisk is sending info back that CM doesn't like. I keep getting a SIP/2.0 400 Bad Request -

I am using Sipura 841 phones and Asterisk CVS-v1-0-06/14/05. Whenever a call comes in with blank CIDName or CIDNum the phone reports the respective variable as "asterisk". I can manually set the variables to whatever I want: CIDName (alpha-numeric) & CIDNum (Numeric). But if I try to make them blank, or null, or maybe throw some alpha characters into CIDNum, they get reported