similar to: trying to get trunk to register with * behind NAT

Hello list! I?m having an issue when reloading Asterisk, I?ve had this problem in Asterisk 1.6.1.6 so I upgrade to 1.6.2.1 version, but I still have the same error. For example, I send a "reload" in Asterisk CLI and this is the output: isb152*CLI> reload == Parsing '/etc/asterisk/extconfig.conf': == Found == Parsing '/etc/asterisk/manager.conf': == Found

Hello, Has anyone experienced a segmentation fault in asterisk for using G729 against an AS5300 in SIP ? I'm having this problem. Also, any other codec I use gives me incompatible media (can be read in SIP DEBUG messages). AS5300 configured for multiple codecs, so is Asterisk. Tried G711u/A G723 and G.729. Any clues ? Regards, Jorge A. Info: Asterisk ver 1.0.7 stable Using AMPortal

I am trying to connect two Xten eyeBeam Video Phone No problems in voice connecting. I tryed to modify my sip.conf [general] language=it videosupport=yes ; enable Asterisk video support port = 5060 ; Port to bind to (SIP is 5060) bindaddr = 0.0.0.0 ; Address to bind to (all addresses on machine) disallow=all allow=h263 allow=gsm allow=ulaw allow=alaw ; H.263 is our video codec ;

I have downloaded and installed Asterisk@home and I have installed X-Lite on my Windows machine and I am able to connect it to the Asterisk server. I went ahead an created an account on Broadvoice today and followed the directions on http://voip-info.org/wiki-Asterisk+settings+Broadvoice and http://foo.robotics.net/mediawiki-1.3.10/index.php/Asterisk_Setup but when ever I try and make a call from

Egad, not again with Broadvoice! Anyhow, I recently installed AAH and configured my TDM11B and got that and some SIP phones working. I still have some issues to work out, etc, but my current problem is Broadvoice. I have checked out all of the online resources, including the recent list exchange about the recent changes made by Broadvoice. However, the one thing I have found to be consitent in

Hello, My colleague installed a Asterisk home as company's SIP server and I would like to integrate the Quintum gateway (SIP) but the calls don't get through. Bellow is are the configurations on each side: Quintum ******** Primary Registrar = 202.69.190.244:5060 Primary Registrar User Name= sipquintum Primary Registrar Pwd= sipquintum Primary Proxy =

Hi all, I have been worriyng and googling a lot but I can't find my mistake. I am trying to regiter an X-Lite Softphone to Asterisk, but I am getting a SIP/2.0 403 Forbidden response: SEND TIME: 10157385 SEND >> 10.100.249.12:5060 REGISTER sip:10.100.249.12 SIP/2.0 Via: SIP/2.0/UDP 10.100.249.86:5060;rport;branch=z9hG4bKFAC1B6F2B5414EE9855696A09A83FB22 From: Tester

Hi All, I'm trying to connect to a SIP carrier who never connected with Asterisk. I managed to connect with a sipura phone or a grandstream, no problem. When I configure asterisk, I'm able to send out calls to the carrier no problems, however, receiving calls doesn't work, and I keep getting the following messages: <-- SIP read from 69.xx.xx.xx:5060: INVITE

Hi, I am currently trying out the asterisk@home (version 1) release of Asterisk, and I want to configure it as follows: Calls from regular telephony network (PSTN) come in through my VoIP provider over SIP and outgoing calls to the PSTN should be routed through the ViOP provider onto the PSTN network. I thus have no direct PSTN connection, but only a SIP connection. Incomming calls

I'm running asterisk on a Freebsd with 2 Nic's. Inside NIC is 192.168.5.x where the phones are. Outside NIC used to be a public IP with the ISP's device set to bridging, but the new WiMAX router only offers me the public ip 94.18.x.x on the outside, and forwarding everything to 192.168.1.50 on the "Outside NIC" Some of the phones are being disconnected with Asterisk

Lance, Have you configured your sip.conf to use these aprameters under General? ;externip=66.213.227.66 ;localnet=192.168.1.0 ;localmask=255.255.255.0 -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Lance Grover Sent: Thursday, June 02, 2005 9:39 AM To: Asterisk Users Mailing List - Non-Commercial

Will this do the intended thing? This is in sip_nat.conf which is included in sip.conf: externip=192.168.0.200 localnet=192.168.0.200/255.255.255.0 externip=64.168.237.110 localnet=192.168.1.2/255.255.255.0 I have Asterisk running on a box with two Ethernet interfaces and bound to both. One interface, 192.168.1.2 services clients outside the firewall who are led to believe that Asterisk is

If you define a sip peer, wheather or not you put an entry in the field OUTBOUND CID, if you dial an external extension (let's say an extension on another asterisk server, connected via IAX2 connection) the callerid received by the foreign asterisk is device <YOURNUMBER>: i.e device <567> If you take a look at etc/asterisk/sip_additional.conf, you can see under the SIP extension

My asterisk box is behind a NAT firewall. I have friends that are on Earthlink, Vonage, etc. I'd like to make VOIP calls directly to them rather than going through the PSTN. With Earthlink, I can make this work through FWD peeting numbers, but that's sort of a waste of FWD bandwidth. WIth Vonage, it doesn't work. I suspect this is because of the breakage between FWD and Vonage that

how do i troubleshoot no ring tone. It was working and all i added was the lines below now it doesn't ring. Edit sip_nat.conf for proper NAT: localnet=192.168.1.0/255.255.255.0 externhost=pbx.DOMAIN.com (Set your external hostname name here) externrefresh=10 fromdomain=DOMAIN.com (Set your external domain name here) nat=yes qualify=yes canreinvite=no Add extra codecs to

Hi, I'm running *@home 0.5 exactly as it comes off the .iso image and have configured an extension (206) using AMP for a grandstream 102. Have checked sip_additional.conf looks ok, but I can't get the incoming cli on the 102 to read anything other than 't ri', apparently from other posts the phone is trying to display 'asterisk'! I've got a couple of pc's

Hello all, For some reason I am not showing registration in SIP. Can anyone give me an idea what can cause this? asterisk1*CLI> sip show registry Host Username Refresh State -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050311/bd3a7577/attachment.htm

Wiley, There are a couple of issues that we saw while not using this option. 1) sip authentication failures as Asterisk is not able to reach Polycom phones. A typical problem description is here: http://lists.digium.com/pipermail/asterisk-users/2004-December/079251.ht ml 2) DTMF issues for Transfers, Hold or simply to dial extensions. This problem is more pronounced when you are using

Hi, I'm chasing a bug in chan_sip.c where Asterisk is removing the rport parameter out of the via headers. Here's my scenario: UA -> Snom NATf -> Snom 4S Proxy -> Asterisk Echo Test Function NATf, the proxy, and Asterisk are all on public IPs. So my question is: In chan_sip.c, copy_via_headers function, I see an if statement testing for "(ast_test_flag(p, SIP_NAT) ==