Displaying 20 results from an estimated 1400 matches similar to: "Errors using Asterisk as Sip Client behind SER !!!"
2005 Feb 14
0
Asterisk as SIP UAC !!!
Hi gentleman
I've configured SER to forward every call starting with sip uri request "1" to Asterisk. I need to configure Asterisk as a Sip UAC in order to make it call to my other SIP Provider outside my network, sending username and password for authentication.
I've read at www.voip-info.org some articles but found none that could suit to my needs, but yet I've found an
2005 Feb 02
0
Problemas with Basic Services.
Hi Everybody,
I'm trying to make my asterisk dial a international call from a SER request of it. My ambient is like this.
[Clients]--[SER]--[Asterisk]--[Go2Call]
Client: My SIP clients.
SER: My REGISTRAR/Proxy Server
Asterisk: All other services(Voicemail,musiconhold etc) and also acting as an UAC dialing International Calls, because SER doesn't do that sending username, password and
2005 Feb 02
0
SIP Call through Asterisk
I'm configuring my SER to forward calls based in extension. Cause I would like my ASTERISK to do international calls. How could I make ASterisk do international calls ?? I must pass the host (Go2Call), username and password to get the call up, but I don't know how.
I'm trying to find a extension command that like Dial, does the call but passing username, password and host for
2005 Feb 01
0
Asterisk Services working with SER !!!
Hi everybody,
I'm new to this list, my name is Felipe Martins and work for a telecom company. I'm interested in VoIP server to work as a service for my clients, I've already configured SER to work with mysql databases and authenticate all my users, two sip phones are already communicating with eash other, I can see all the logs generated by them, what I want now is to use asterisk as
2005 Mar 14
2
asterisk outbound to SIP provider problems
Hi
I am having alot of difficulty connecting to SIP providers (I am trying 3)
and can't seem to find anything similar in the wiki or on the lists.....I
can receive inbound calls fine however on placing an outbound call the
calling phone never gets 'connected' but 2 way audio is passed for about
20secs before some sort of timeout.
Anything suggestions as to what I could try
2005 Feb 11
0
Asterisk as a UAC forwarded by SER
Hi everybody,
I have a SER Server (Sip Proxy / REGISTRAR) and a Asterisk Server (PSTN and other services). I've got some clients that make calls to each other through my SER Server, that's to say, non external or international calls. I would like my clients to make external and international calls through my server but for that they must authenticate at another server to have a valid
2004 Jan 20
0
Outbound call with Go2Call
Any got experience with these?
I couldn't fint anything in any postings...
it seems they have a h.323 on voip01.go2call.com and a sip on
sip01.go2call.com
I have tried to register with some of the same as I use for nikotel, but
Asterisk does not want to register.
I've tried to use both the user name (ingvald) and the PIN code 440.... as
authentication.
---from sip.conf----
2006 Dec 12
1
AGI problema
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
<font face="Verdana">Hi all. I've written a AGI in C language.
2006 Nov 02
1
is IAX required for firewall and router?
I'm trying to understand IAX and whether or not it would solve my
difficulties:
'The primary goals for IAX were to minimize bandwidth used in media
transmissions, with particular attention drawn to control and individual
voice calls, and to provide native support for NAT (Network Address
Translation) transparency. Another goal is to be easy to use behind
firewalls.'
2003 Jun 06
3
SIP codecs
i've been having a problem getting two SIP phones
to bridge running through asterisk, actually one is
a SIP softphone, SJ Phone, and the other is the
Go2Call calling gateway.
Someone suggested that I don't have the right codecs.
How do I find out which codecs are installed, and how
can I install further codecs? Any suggestions which
would be the right one?
I think hte problem is from the
2003 May 27
1
please help (reposted) - re. * connecting to a commercial call service
hi,
maybe someone out there already has some experience and can help me.
I have just ordered an E100P card from Digium, I already have a basic
asterisk setup up & running.
My application is the following :
I want to accept incoming calls from the PSTN to Asterisk, and without
asking anything of the client just pass them immediately to a call gateway
in USA, actually we are planning to use
2018 Jul 24
0
deleting file with unusual characters
Hi
I can't delete a file from a local server.
I can list the file, however:
# smbclient //WQS004/Comum -U user%pass -c dir\ '"Engenharia\PROJETOS LEGAIS 2014\PROJETOS 2012 A 2014\ARQUIVOS REVISADOS_07.2014\PROJETOS PLANTA JACAREI\FABRICA POLI\RICEFER_2808\PROJETOS\RO 04-400-01\92364 - Reator 4 m-¦ - Finalizador 6 m-¦.dwg"'
Domain=[MYDOM] OS=[Windows 6.1] Server=[Samba
2003 Jun 06
1
more about SIP ...
I added the line "allow G723.1" in my sip.conf general config,
and from a bridge connection which gives silence,
I have progressed to the error message below,
and the call gets rejected.
help!!
Dave
ps. 217.168.168.49 : soft sipphone, i'm trying SJphone & Pingel Instant
Expressa
723@216.52.153.207 : Go2Call SIP gateway
-- Executing
2013 Dec 27
0
obox_fs and Dropbox, someone uses it?
I purchased the license for the Dovecot Object Storage for Dropbox to
test this functionality on a personal domain.
Unfortunately I can not make it work, I create the token for my Dropbox
account from here https://dropbox.dovecot.fi/ and setup in dovecot
configuration.
When I try to login with an user I found these errors in log file:
============
Dec 27 10:52:16 mail dovecot: imap-login:
2004 Jul 19
0
Setup for Go2call ? Or any SIP provider using phonejack or linejack g729 g723
Hi, does anyone have the setup for go2call ?
I have digium boards and quicknet linejacks and phonejacks.
The cards work fine in asterisk without the g729 or g723.1 for the
phonejack.
I will like to do SIP origination using the codec in the phonejack and
linejack g729 or g723 and send the calls to go2call.
Anyone has the setup for this ? Or similar setup to a SIP provider using
g729 or g723
2003 May 13
1
beginner's question!
hi there,
I have just downloaded and installed asterisk a couple of days ago, it compiled correctly and starts up and runs, on a Redhat 9 system freshly installed for testing. I don't have any extra hardware installed so far, was attempting to just try out connectivity. I am having some probs with the configuration, maybe someone out there can give me some tips :
firstly on modifying the
2002 Mar 18
0
Wine's working, Buzz ain't happy...
If anyone remembers, I was having issues running Jeskola Buzz with wine.
I've fixed this by apt-get remove-ing the debian-unstable packages and
compiling wine from source (wine-20020310) which has created the
necessary registry files. However, when I try to run Buzz.exe, I get the
following
fixme:msvcrt:MSVCRT_setvbuf (0x403bc744,0x41544828,0,4096)stub
fixme:msvcrt:MSVCRT_setvbuf
2012 Oct 09
2
Cannot make Windows join Samba domain
Hi,
I'm having an issue trying to make a Windows machine sambaserveroin a Samba domain. Samba is running with LDAP backend (OpenLDAP). When I try to join the domain, Windows says that the machine account does not exist. The machine account, however, is successfully created in the LDAP directory after the join fails. When I try to join again, Windows says that the account already exists.
2003 Jul 10
2
OH323 + G729 + Go2Call
hi ..
i've just installed and licensed an instance of the G729 codec.
I am trying to connect through asterisk to Go2Call server ..
According to their info it involves dialling extension 729 on
voip01.go2call.com, to get the IVR.
my extensions.conf shows :
exten => s,2,Dial(OH323/h323:729@216.52.153.206)
which I think is correct, I have G729 enabled in the OH323.conf
file and it seems to
2002 Oct 14
1
Xbox Connection
Hi all wondered if you could help me with this little problem I have.
I''m wanting to connect my Xbox to the net for gaming and have the following set-up
3 interfaces on my Linux box
eth0 :net (connected to my cable modem)
eth1 :me (IP range 192.168.3.0)
eth2 :loc (IP range 192.168.0.0)
My Xbox is connected through a hub to eth2
I need to forward TCP and UDP packets to my PC which is