similar to: Software RAID CentOS4

When a new system CentOS-4.4 is built the swap partition is always reversed... Note md3 below, the raidtab is OK, I have tried various raid commands to correct. swapoff -a raidstop /dev/md3 mkraid /dev/md3 --really-force swapon -a And then I get a proper ourput for /proc/mdstat, but when I reboot /proc/mdstat again reads as below, with md3 [0] [1] reversed. [root]# cat /proc/mdstat

Hi, Can anyone help me with this since I want to get it done "the correct way" I'm trying to make mdmonitor to execute a program when it detects a fail event automatically. Currently, from what I see, init is calling mdmonitor with these options mdadm --monitor --scan -f (note that the --program is not there) and this is in my /etc/mdadm.conf MAILADDR root PROGRAM

Somewhere, mdadm is cacheing information. Here is my /etc/mdadm.conf file: more /etc/mdadm.conf # mdadm.conf written out by anaconda DEVICE partitions MAILADDR root ARRAY /dev/md0 level=raid1 num-devices=4 metadata=0.90 UUID=55ff58b2:0abb5bad:42911890:5950dfce ARRAY /dev/md1 level=raid1 num-devices=2 metadata=0.90 UUID=315eaf5c:776c85bd:5fa8189c:68a99382 ARRAY /dev/md2 level=raid1 num-devices=2

I wrote a bunch of files to a backup DVD about two months ago and now neither of my drives will read it. I get mount errors from "not a directory" to something like "unrecognized file system type" and so on, usually after a really long wait and a notice about how the drive is write-protected (duh). Here's what happened most recently: # mount /dev/hdc /mnt mount: block

Hi All, I had to reboot a machine as I lost the ssh connectivity to it. I could ping to it though. On rebooting, the dmesg buffer showed the following messsage hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdc: dma_intr: error=0x40 { UncorrectableError }, CHS=7520/0/155, sector=1820440 end_request: I/O error, dev 16:02 (hdc), sector 1820440 hdc: dma_intr: status=0x51 { DriveReady

How can I use fdisk to partition when installing CentOS4 instead of using 'auto' or disk-druid I want to make RAID 'fd' type partitions for hda and hdc I tried every ctrl-alt Fx and can't get to a shell TIA Gerald

I have problems getting the TIMEOUT value work the same way LILO/GRUB does it.. ie it should wait until the timeout and then use the default value. However, it goes straight for the default value without waiting a single second (and a TIMEOUT value of 500 should mean 50 seconds, as it counts in 1/10th of a second, right?) SYSLINUX (isolinux) 2.00 ----8<------8<---- SERIAL 0 38400 TIMEOUT

Hi! A few days back ...I upgraded using yum update. I did this on 3 machines of which 2 of the machines are mirrors. I have no problems w/the other 2 machines which leads me to believe that the fault lies in 2.6 but rather I think I have a hard drive failure. while the system is trying to boot up. it goes to: grub stage 2....that's the first thing I seem to find outside of taking forever to

I have a p4 motherboard with 2 ide interfaces, I connect 2 40 GB drives as hda and hdc, I install Centos 4 from a CDROM, and partition the drives as 2 x raid partition each plus a swap partition on hda, the make md0 and md1 to install /boot and / respectively. Install goes well, everything looks great, go to reboot from drives, and all I get is "grub" but no boot. I have tried this ten

I had to use the labelfix hack (and I had to recompile it at that) on 1/2 of an old zpool. I made this change: /* zio_checksum(ZIO_CHECKSUM_LABEL, &zc, buf, size); */ zio_checksum_table[ZIO_CHECKSUM_LABEL].ci_func[0](buf, size, &zc); and I''m assuming [0] is the correct endianness, since afterwards I saw it come up with "zpool import". Unfortunately, I

Hello, I can attach disc ISO image to cd-rom from virsh. And I can replace the ISO image from disc1 to disc2 using the 2nd example. (example) attach-disk guest01 /root/disc1.iso hdc --driver file --type cdrom --mode readonly attach-disk guest01 /root/disc2.iso hdc --driver file --type cdrom --mode readonly My question is, how can I disconnect the image from the cdrom drive using virsh. Because,

Hi, I tried to mount an audio cdrom to listen to its music. But It gives the below error. why is that ? -- [root at worldnet ~]# mount /dev/hdc /media/cdrom/ /dev/hdc: Input/output error mount: block device /dev/hdc is write-protected, mounting read-only /dev/hdc: Input/output error mount: /dev/hdc: can't read superblock [root at worldnet ~]# Thank you Indunil Jayasooriya -- Thank

Package: xen-utils-common Version: 4.0.0-1 Severity: normal This is an offshoot of Bug#588888, but is really a separate issue. It appears that with hvmloader, the disk device names presented to the vm must by from a specific set that hvmloader knows how to emulate. Names like hd[a-c] and sd[a-c] work, but sr0 does not. While this makes sense, when you think about what hvmloader is doing, it is

Hi, Sorry if this is an old and fixed issue but I can't really seem to find a definitive explanation/fix to this in the mail lists. Ever since I upgraded to FC2 my server randomly decides that it can no longer access the disk and "aborts" the ext3 journal leaving it read-only as expected. I've seen the same errors on other mail list, explained away as disk or disk cable

A simple opengl app that used to work quite fine with wine. Newest CVS, has been like this for some time: ============================================================================ FIXME:pthread_rwlock_rdlock FIXME:pthread_rwlock_unlock Could not stat /mnt/teapot/movies (Input/output error), ignoring drive H: Warning: the temporary directory '/mnt/fat/temp' (specified in wine

I got the email that a drive in my 4-drive RAID10 setup failed. What are my options? Drives are WD1000FYPS (Western Digital 1 TB 3.5" SATA). mdadm.conf: # mdadm.conf written out by anaconda MAILADDR root AUTO +imsm +1.x -all ARRAY /dev/md/root level=raid10 num-devices=4 UUID=942f512e:2db8dc6c:71667abc:daf408c3 /proc/mdstat: Personalities : [raid10] md127 : active raid10 sdf1[2](F)

Mount CD ROM iso during kickstart postinstall CentOS 5.2 i386 I''m doing a xen virtual machine installation from a DVD iso image with a kickstart file to set network and run scripts and such in the postinstall section. During the installation the DVD iso is listed as device /tmp/cdrom and mounted on /mnt/source. Once the installation is done and the post install starts the /tmp/cdrom

I could use some help setting up Exact Audio Copy using wine 0.9.24 and SuSe 10.2 with KDE 3.5xx My problem is finding the audio cd, If I put in a data disk, hal will update /media/.hal.mtab will have an entry and create a temporary mounting point such as /media/new I probably could use that in winecfg to set up a mounting point for wine. However if I insert an audio disk, the hal system

Hello, The xm config option boot="c" is intended to boot from the "first" harddrive; however, the enumeration of harddrives is independent of device enumeration (hda|hdb|hdc|hdd), leading to unreliable boot device selection. Example A: I am building a Windows HVM appliance which performs file-system level operations over mounted NTFS volumes - for example a file-system

Hi, I have just installed 4.1 on a new Dell Latitude d610. It does not automount the CDs. When I mount the CD manually I get: $mount /media/cdrecorder mount: block device /dev/hdc is write-protected, mounting read-only The CD writer is an Philips IDE: CDRW/DVD-ROM CDD5263 Here is my mtab: $ cat /etc/mtab /dev/mapper/VolGroup00-LogVol00 / ext3 rw 0 0 none /proc proc rw 0 0 none /sys sysfs rw