similar to: 3COM 3101 SIP

Sorry Newbie asking everyones option. I am setting up a couple of small asterisk phone systems for my work, I started using some snom 190 and bt102 sip phones (the bt102 works really well with iLBC), but the complaint from my workmates is there is no way to see if other people are on there phone or not, or what lines are being used. The snom 190 only has 5 function keys, the snom 220 seems a bit

Greetings, We are looking at installing a VoIP system with Asterisk and are currently looking at the line of 3Com phones. Has anybody had success with using the following phones? We need to buy a lot and we don't want to end up with phones that don't work properly with asterisk. 3Com 3101 (model with speakerphone) 3Com 3102 Business Phone 3Com 3103 Manager Phone 3Com 3105

Has any advancement been made to get 3102 operational in either a SIP or H323 asterisk environment. A post back in time mentioned a downloader service. >From the posts and articles I have read, the NCP is acting like a bootp and tftp server which uploads the configuration to the phone?? Am I close? if so, where does one get the SIP image for he 3102 and 2102 phones? I had 8 donated, but they

Hi all, I just got a Mediatrix 1104 evaluation unit -- a 4 port fxs sip gateway. There's no printed documentation shipped with the unit, but I have a piece of software for windows that shipped with a different model (which I haven't tried configuring yet), that uses snmp to set misc variables (ip settings, sip stuff, etc.). Fairly baroque interface & pretty slim on help...

Can anyone point me in the right direction to learn how to make the 3COM 3102 phone work with Asterisk. I have looked everywhere that I can think of and I am not able to turn anything up. Do I need to have a login to 3COM's site to obtain a SIP image? Any help would be GREATLY appreciated. Thanks, Ben Bush

Dear R users, I have a problem. I don't know how to select the top 10 (n) values for each classes. Thank you! My data is like this: row.names proc cls 7271 568,03338 0,5 7270 554,68458 0,5 7269 510,20638 0,5 7268 485,59969 0,5 7267 421,92852 0,5 7272 410,12101 0,5 3414 409,71429 0,5 3452 402,78699 0,5 3451 401,28114 0,5 3450 361,80607 0,5 3413 360,29883 0,5 3449 352,90043 0,5 3453

I have a 3com sip phone that I can't seem to get correctly setup for * I set the identity of the phone to 5kevin2 I set the password on the phone to 222 (not the admin pw to change the phone's settings, but the pw it is supposed to send to the sip server) I set the sip server to my asterisk servers ip. If I don't add anything to the sip.conf file for the phone, I can dial internal

I posted this to the group last year, but the problem was not fixed so I will give it another try. I use 3Com's PXE server to deploy the Fedora Core boot disk to my clients for an ftp install. I also have ghost boot disks, bios update disks, and a video bios repair disk all using the 3Com PXE server. The problem is when I try to boot a Linux kernel. With all versions of syslinux since 1.72

I have used 3Com 3c509 nic width bnc coax. I have experienced that these cards used width FreeBSD and Samba is unusable due to speed. I tried to change the 3com card with a NE2000 compatible card, and there was a major change in speed. Has anyone else experienced such problem. Asgeir Stangeland

Dear folks, I ve fully read lartc.txt document to make sure my question still unexplained in that document. I want to limit per tcp session, how to do that with HTB or CBQ ? Inside lartc.txt, there is an example for full NAT QoS solution, but thats not what i meant. Thanks.. Regards, Rio Martin. -- _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl

The NOAA National Centers for Coastal Ocean Science is hiring a Computational Ecologist, a statistical/computational ecologist with experience fitting advanced spatial models to marine wildlife survey data (e.g., seabirds and marine mammal transects, fisheries trawl surveys) in R and other statistical languages. This is a full-time, long-term stable contract position. We are looking for an

I use 3Com's PXE server to deploy the RedHat Linux network boot disk for an ftp install. I have done this for RedHat 7.2 and 7.3. I followed the same procedure I used for the other RedHat boot disks using the RedHat 8.0 boot disk and syslinux didn't work. Syslinux boots the system, gets the boot: prompt and dies. The error message is can not find ramdisk image and then cannot find

Hi, I've looked pretty wide on Google for this so I don't think it's been asked before. Has anyone had experience integrating Asterisk with a 3COM NBX system? The only way that I can see that looks possible is via the 3Com NBX ConneXtions H.323 product and then one of the H.323 Asterisk channels. Has anyone done this? Any pointers as to what to avoid or whether to even attempt it?

I've plugged in two 3com OfficeConnect 10/100 3CSOHO100B-TX in my freebsd 4.8 box and they are not detected. Do I have to enable some support in the kernel ? Cheers Hannes

I'm using pxelinux in an interesting way, to load DOS boot disk images from a win2k RIS (Remote installation Service) to do various functions. Soem of the disk images are used for flashing the BIOS on pcs, but a specific few are set aside for booting MSDOS with MS lanman so that ghost can be run to load images to/from the lan. I've got 6 different disk images setup and the all work

Hi, Has onyone heard of successful deployment of 3Com ToIP over IBM iSeries system (formely AS/400) ? A prospective customer seems to looking for this but, in my whole life, I've never of a such setup. Does it work ? regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

Has there been any luck getting the 3Com NBX series phones to work with Asterisk? Thanks! -Andrew

Hello All, I seem to be having a problem with PXE under the 3com MBA once the pxe loads the standard redhat 7.2 lilo prompt and I type my label which is a4-72 and hit enter, I get: Loading vmlinuz... and it stops most of the time. Sometimes it loads and once it gets to the part of installing linux the screen turns red and I get "interrupt handler not syncing" Thanks -- Otis DeWitt -

How hard is it to integrate * into an existing 3com NBX setup? -Tim -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041004/bf01e3d9/attachment.htm

Hello, This question is in the context of Tesla / Fermi generations, which have explicit bindings for textures / samplers. It might also apply to Kepler+, not quite as sure due to the bindless nature. I've been trying to understand how the TLD operation works (which is used to implement texelFetch in GLSL). It does not appear to the op takes an explicit sampler id at all (unlike all the