similar to: chan_sip not 100% RFC3665 compliant - re-REGISTERsfail.

Greetings, For the past 2 months I've been struggling with registration problems with asterisk+external FXS/FXO gateways (www.addpac.com) that use RFC3665 re-registration procedure. This problem occured for devices with more than one FXS port with a set non-empty password. Those gateway attempt to re-register after the initial register timeout period expires fully compliant with

Greetings, I'm using asterisk to connect our three locations together with a sort of inter-company auto attendant connected like this: PBX (fxs) <-> Sipura 3k (fxo) <-> Asterisk <-IAX-> remote asterisk It works like this: Person picks up their phone and dials a number to get to the auto attendant (I don't have any FXO ports available on our PBX to do it the

Hi guys, I have made a upgrade to my addpac ap200c, however it does not upload complete, now I can load addpac. Is there anyway that can I upload the old firwmare? Any help is appreciated. System Boot Loader, Version 2.2.5/DUAL(852) Copyright (c) by AddPac Technology Co., Ltd. Since 1999. System Bootstrap, Version 1.2 Decompressing the image: # -------------- next part -------------- An

Hello everybody, Which one is a better choice 1. Gateway device with FXO <-> SIP ( example Addpac http://www.addpac.com/addpac_eng2/addpac_product_view_detail.php?class_id=19&item_id=59 ) 2. Digium (Wildcard TDM400P) 3. Sangoma (A200 Analog FXO/FXS) All i need is to put asterisk in place with 4-8 incomming lines (ordinary POTS ). With IVR, Voice mail and International Call via SIP.

Anyone else has problems with CVS HEAD's from today with voicemail hanging up silently without any debug/error messages when checked? It also keeps insisting that the user's voice mailbox is full and can't store more messages even if I clear/rebuild the /var/spool/asterisk/voicemail stuff. I've tried falling back to voicemail.conf entries from realtime voicemail with the same

Hello to all, Im trying to use DeadAGI to implement billing with Asterisk2Billing. Before the billing, I had something like: exten => _2XXXXXXXX,1,Dial(SIP/${EXTEN}@voiprovider) Now, with Asterisk2Billing would be something like this? exten => _2XXXXXXXX,1,Answer exten => _2XXXXXXXX,2,Wait,2 exten => _2XXXXXXXX,3,DeadAGI,a2billing.php exten => _2XXXXXXXX,4,Wait,2 exten =>

Hi all, Today I've stumbled upon a very strange behaviour with an analog fxs/fxo gateway (AddPac AP1002, http://www.addpac.com/english/AP1002.html) connected to a CVS HEAD(from today) Asterisk server. This manifested itself after enabling the CallerID on the pstn lines connected to the FXO ports of the module. Both FXO modules have their own sip username/passwords and are registered to the

http://software.newsforge.com/software/05/07/06/1235211.shtml?tid=150&tid=147&tid=136 http://www.theregister.co.uk/2005/07/06/eu_bins_swpat/ -------------- next part -------------- A non-text attachment was scrubbed... Name: vahan.vcf Type: text/x-vcard Size: 287 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20050706/357c6cce/vahan.vcf

Greetings, Is there a way to tie a specific sip username to a IP address when authenticating against mysql sipfriends table? (USE_MYSQL_FRIENDS=1 USE_SIP_MYSQL_FRIENDS=1 in channels/Makefile) The reason is that I'm using Wellgate FXSes that have second/third/fourth FXS ports bugged when I use a password, but work ok when there is no password. Linking the username to a specific ip could

I'm loosing hair at cosmic speed now for the past 10 days. Welltech's Wellgate 38xx/35xx FXO/FXS SIP hardware versions seem to have very buggy firmware possibly due to hastely done porting from H.323 firmware. Is there anyone on this mailing list who was able to: 1. setup a 35xxA FXS with all ports authenticating properly with *? or 2. setup a 38xx FXO to work as dial-in from pstn to

Hi. I'm new in Asterisk with MGCP. I set up a MGCP user agent and start asterisk with the next configuration files. '--------------- extensions.conf ---------------------------------------------------- [general] static=yes writeprotect=yes [globals] ap1 => mgcp/aaln/ap200@64.76.148.186 [macro-apl1] exten => s,1,Dial(${ARG1},30,Ttmr) ;exten => s,2,Voicemail(u${MACRO_EXTEN})

Hello list ! I don't have the money to test out all the products and reading the manuals is not always that enlightening... Does someone here know a good gateway-product that lets analogue telephones communicate with an Asterisk-server. I have found the Grandstream GXW-400x to be able to add SIP-accounts to analogue telephone devices that are connected to the FXS-ports. Moreover this

Hi, I was wondering if anyone has successfully configured two lsi/3ware 9750-4i series controllers for multipathing under CentOS 5.7 x86_64? I've tried some basic setups with both multibus and failover settings, and had repeatable filesystem corruption over a iscsi(tgtd) or nfs3 connection. Any ideas? Vahan

I'm authenticating against sipfriends in MySQL, and have just noticed that none of the below commands return any output: sip show users sip show inuse sip show active sip show subscriptions Is this a bug or something wrong on my side? I'm using the stable 1.0 cvs Vahan

Does anybody use UTStarcom F1000G Wi-FI VoIP phone? http://www.utstar.com/Solutions/Handsets/WiFi/ I'm planning to buy one and I need to know did you have any problems with phone. What is the sound quality? How close you need to be to the access point? Please, any information's are useful to me. -- Tomislav Parcina tparcina#lama.hr

We are using the following to record conversations. exten => _1XXX.,1,SetVar(CALLFILENAME=call_to_${EXTEN:1}_dated_${TIMESTAMP}) exten => _1XXX.,2,Monitor(wav,${CALLFILENAME},m) exten => _1XXX.,3,Dial(IAX2/4506:zj5S3A5a@nl.voipgate.nl/${EXTEN:1}) exten => _1XXX.,4,Congestion exten => _1XXX.,104,Congestion This was working previously to record both sides of the conversation but now

I've searched for a few days now without finding an answer. The release notes for version 1.0.5.16 of the Grandstream firmware says it supports attended transfer using replace but the docs haven't been updated so I can't work out how to enable it, or whether it should Just Work. I'm currently using the # attended transfer patch for * but would like to get back to using the

Where I can find the firmware for the Wellgate 3804 ? The files are: - 2m4sipfxo.103 - 4fxosip.103 I don't have a password to pick up it at the welltech site. Kind regards, Miguel

Using FireFly, all other codecs but G711 Ulaw is selected. But whenever I place a call, I get: Jan 24 16:07:06 WARNING[30654495]: dsp.c:1468 ast_dsp_process: Inband DTMF is not supported on codec G.711 u-law. Use RFC2833 Umm, wtf? I thought Inband was ONLY supported on G.711 u-law. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Has anyone used this board as an Asterisk server? http://www.supermicro.com/products/motherboard/ATOM/ICH9/X7SPE.cfm?typ=H&IPMI=Y I'm mostly interested about the possible compatibility issues this board may have with the AEX800 card.