similar to: Newbie guidance requested --- Grandstream Budgetone

Hi Just recieved the above phone Does anyone have sip.conf and extension.conf example for the SIP phone working with the FXS w100p and the FXO tdm400d any help would be appreciated Thanks Robb

I'm using Asterisk on a open server (no firewall or NAT) and trying to communicate with a Grandstream BudgeTone 102 SIP phone which is behind NAT. The BudgeTone is at firmware level 1.0.4.30 and Asterisk is from CVS about a week ago. My problem is that I'm only getting half-duplex communication -- I can hear voice from the Asterisk server but the server does not understand any voice from

A BETA firmware upgrade toasted my ATA286. It now has limited operations. It will get an IP address via DHCP and register to the last configured SIP server, but the web interface is gone as is the voice config menu. Apart from registration, there doesn't appear to be any other SIP functionality. An Ethereal dump does not show the device trying to grab a new firmware via tftp on bootup, so

Checking the earlier mails, it stated that the phones were $75 (100) & $85 (102) ref :- http://lists.digium.com/pipermail/asterisk-users/2003-June/013483.html Well, I just called Ovislink/dgtimes and was quoted $90 & $100 and the person said there was no price change. Anyone on this list actually bought them at the $75 & $85 rate ??? Regards...Martin -- Too much is just enough.

Hi there! I installed the BudgetTone (GrandStream) on my LAN without any problems. Then, I moved it to another location using a D-Link NAT. I opened 5060 (SIP) and 5000 to 5008 for RTP. I also fixed the IP address of the BudgetTone. When I receive a call on my Asterisk, it would ring my FXS as before. However, after I pick up, it hangs within a few seconds (Hungup Zap1-1 in the log). The

Does anyone know what the Grandstream Budgetone is going for $$$ in the US? I didn't immediately see pricing on the phones page. AJ

I am setting up a small Asterisk system for use at home. I have one Budgetone 101, one Cisco 7960 and two Xten lite softphones. So far everything is working expect for an issue with the Budgetone. When a call is placed between the Budgetone and any other phone, the call is setup and sounds good. If I hang-up on the Budgetone, everything is ok. If I hang up on the other phone, the Budgetone

Hi I am setting up an Asterisk System in an office environment, Incoming and Outgoing calls are working ok, but i am having a few strange problems regarding call waiting. With the SNOM 200 (firmware 2.02t) phones, if you are on a call and a 2nd call comes in, the call waiting beep is played and the light flashes, but if you hang up the 1st call, instead of the phone ringing, it connects the

Is anyone using this combination successfully? I have a dell 500sc running rh9 and asterisk 1.0rc1. It is configured with an x100p. I have a Sipura SPA-2000, laptop with Xlite and a Grandstream Budgetone BT-101. I have signed up with Voipjet (they use iax2). I also have an FWD number via iax2. I can sucessfully call back and forth to all devices via zap, sip, and fwd. I can successfully

Has anyone seen/dealt with the Grandstream BudgeTone-100 producing double dialing with asterisk? Thanks JDT Example: (password input = 101) -- Playing 'vm-password' -- Incorrect password '11001' for user '101' (context = <any>) -- Playing 'vm-incorrect' -- Playing 'vm-password' -- Incorrect password '110011' for user

I have a client using a Grandstream Budgetone 102, but he is unable to register to my Asterisk server. About every 20 seconds, I get the following messages: Aug 11 11:27:17 DEBUG[1087740720]: chan_sip.c:748 __sip_autodestruct: Auto destroying call '3b4b68ec48200ab9@192.168.xxx.xxx' Aug 11 11:27:19 NOTICE[1087740720]: chan_sip.c:7336 handle_request: Registration from

Hi everyone. I see many posts complaining about Grandstream equipment, so I thought I tell the other side of the story as well. We use Grandstream Budgetone 101 phones in our office and they work extremely well. We have no echo, no crashes, no sudden resets, they "just work". We provision them using TFTP. Our asterisk box has 2 HFCPCI ISDN BRI cards. It's running asterisk 1.2.0 on

Hello guys, I ask you to share your experience with your BudgeTone 100.... I have my asterisk @ work and I've bought a GrandStream BudgeTone (SIP phone) and I usually use X-Lite I have plugged my BudgeTone into my home network because I want to be called even at home. I succeed to register my X-Lite with Asterisk from home but I can't do that with my BudgeTone. (I don't know

I logged a bug I wanted to see if anyone else is having this problem or if it's just me. http://bugs.digium.com./bug_view_page.php?bug_id=0000486 I just downloaded the newest version from CVS(Tuesday@~7pm) and I am getting an error whenever I call the asterisk box. I cannot here any audio on the budgtone. This works fine with my pingtel phone and my sip 7960. Also if I call my Skinny 7960 it

I've looked through the archives - and see questions similar to mine, but no answers. What, if anything, can be done to get the incoming Caller ID to be presented on the Budgetone's Caller ID display? In all other respects the phone+Asterisk seem to be extremely happy with each other.

I know there are several folks hanging around the list that resell VoIP products, I'd be interested in getting your info off-list as I'm trying to persuade someone to get me a budgetone 101 for Christmas ;) I've checked the yahoo site, and they seem to only carry it in white.. Ideally, I'd like blue, so if you have it, please let me know. Also, I've been watching the list for

Hallo! Anyone tried connect PC port of BT-102 to Mac mini? I have four BT-102. Looks like none of them works with Mac mini G4...

Hello! I am considering mass deployment of Budgetones 102. According to their website, remote provisioning (configuration via TFTP) is possible. Anyone has experience with this? Is this really working?

Hi, not sure if it is against the rules to sell second hand equipment in here but haven't seen anything against it so here it is. I'm upgrading to 2 lines so I have some spare equipment for sale here. This is an ideal starter pack and will get you going with 1 line and 1 extension. 1 x http://www.digium.com/downloads/product_sheets/X100P.pdf 1 x

Maybe I'm loosing my mind but I've just noticed that if I put a call on speakerphone and I press speakerphone again it hangs up the call, you would expect it to take the call off speaker back on to the hand piece. I'm using V 1.0.5.22 firmware. Is there any other way to turn off speakerphone I'm missing? Cheers, Dean -------------- next part -------------- An