similar to: Fax with spandsp + zaphfc

Hi, I have a partial working installation with zaphfc. Incoming call : For incoming call, seems work fine. But the sound is very bad with bounce short crashing sound. Same sound with echo cancel off or on. SDA work fine. Another problem, it's seems that's zaphfc don't reset correctly the line. I have one of my D channel how was busy even after stop communication. Outgoing call :

I'm not aware of any zaptel driver for such HFC USB modem (some Xorcom's products use USB, so ...) so I'm inclined to think it's not possible but it's better to ask ... Cheers ------=_Part_13548_28463665.1207585749504 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Hi

Hi, Has anyone information about BRI hardware supported by 1.6 libpri ? In another thread, I was told a basic BRI card with HFC chipset (Bewan Gazel 128) was supported but I would delighted to lear about other harwarde (and specifically about Digium B410P). Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi all, I'trying to use spandsp (app_rxfax) to receive faxes. When there are more than one page, the system creates a tiff file with only the first page and the other are lost, even if the full log says: Mar 7 17:17:42 DEBUG[5876] app_rxfax.c: ============================================================================== Mar 7 17:17:42 DEBUG[5876] app_rxfax.c: Pages transferred: 1 Mar

Hi, I just setup a fax server by spandsp. But it doesn't look good. Because each fax I received from my fax machine is not completed. I use te410p work with it. While the voice call is good. Any ideas? Trace shows that the fax is received successfully. Aug 17 12:01:10 VERBOSE[19571]: -- Executing RxFAX("Zap/94-1", "/var/spool/asterisk

Hi All I am using asterisk version cvs-v1-0-04/15/05 and spandsp 0.0.2pre18. I can receive and then email most faxes without issues, but recently I am having this issue when receiving faxes from a particular person. I can receive the faxes ok, but there are alot of bad rows as indicated by my logs below and the fax is not readable. I have included a good (from another user) and a bad fax. We

Hi there, Do anyone have any experience with SIP phone that support a headset ? We have Budgetone phones but we need headsets. What would you advise ? Thanks Thibault

Hi All I am using asterisk version cvs-v1-0-04/15/05 and spandsp 0.0.2pre18. I can receive and then email most faxes without issues, but recently I am having this issue when receiving faxes from a particular person. I can receive the faxes ok, but there are alot of bad rows as indicated by my logs below and the fax is not readable. I have included a good (from another user) and a bad fax. We

Hi Running slackware 9.1 with compiled kernel patched to 2.6.6 running ok. Having problems compiling zaphfc.c First thing was the can't find "irq_vectors.h", but "solved" by changing the #include "irq_vectors.h" to #include "mach-default/irq_vectors.h" in /usr/src/linux/include/asm/ directory. But I still have errors with "structure has no

How i can log to understand where is my problem Sometimes zaphfc hang my nt1 plus with that error zaphfc: empty HDLC frame received. zaphfc: dchan tx fifo total number of frames exceeded! zaphfc: dchan tx fifo total number of frames exceeded! zaphfc: dchan tx fifo total number of frames exceeded! zaphfc: dchan tx fifo total number of frames exceeded! zaphfc: dchan tx fifo total number of frames

Hi Guys I have been running a test server for a few days now with * 1.0.9 bristuff RC8n. I had a power failure and the test machine was not on the ups. When power was restored I found the following error: FATAL: Error inserting zaphfc (/lib/modules/2.6.11.4-20a-default/misc/zaphfc.ko): Unknown symbol in module, or unknown parameter (see dmesg) My dmesg output: zaphfc: unsupported

Hi, I solved the Problem: the context defined in zaptel.conf: context = zapincoming was not in extensions.conf, so nothing worked. ( I assumend this context is only necessary for calls from zaptel, not to it) This may be a bug: in the verbose log I found nothing like "[chan_zap] Could not initialize ..., due to ....", this had helped alot and had saved alot of hours (-;

I've got Zaphfc working running Asterisk v. 0.7.2 Then I have tried with Asterisk V. 1.0 and the latest from CVS - with no succes. Has anybody got zaphfc working with newer version than 0.7.2 ? NR -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040616/32481fca/attachment.htm

Hi, We've been using zaphfc single ISDN cards as cheap Zaptel timing sources for our Asterisk boxes for a long time, and in the asterisk 1.0.x series, had zero problems doing so. I now have some boxes with Zaptel 1.2.x (with a mixture of 1.0.x asterisk and 1.2.x asterisk), and this setup no-longer seems stable - By plugging or unplugging the ISDN cable, and sometimes just randomly the card

Hello, After searching the archives, I''ve found only two messages regarding this case, but there were no solution. I have a similar problem, so I try to ask here. I have twi HFC chipset ISDN cards in my pc: 0000:00:0d.0 Network controller: Cologne Chip Designs GmbH ISDN network controller [HFC-PCI] (rev 02) Subsystem: Cologne Chip Designs GmbH ISDN Board Flags: bus

Hello all, I've a little clue with zaphfc used to connect to a BRI linethat probably can be a configuration issue.... (really I hope so) Here, telcos (expecially mobile operators) use to substitute the dialtone with some vocal indication without answer the line. (Indications like "The customer is not reachable" or "wait because the customer is on the phone" ecc..) For

Hi, my zaphfc is flooding my syslog with two messages (even without asterisk running). Is this "normal"?: -------------------------------------------------- zaphfc: bchan rx fifo not enough bytes to receive! (z1=1360, z2=1353, wanted 8 got 7), probably a buffer overrun. zaphfc: dropped audio (z1=2712, z2=2695, wanted 8 got 17, dropped 9). With Asterisk running (asterisk -vvvvvgc)

Hi, I'm tring to setup a ISDN HFC card in NT mode, but I have a problem with ztcfg that always report a problem regarding FXS/FXO signaling. Is someone have ever seen this ? Loadind the zaphfc module seems ok.... -- insmod ./zaphfc.o modes=1 ------------ zaphfc: card configured at mem 0xc89eee00 fifo 0xc29e8000(0x29e8000) IRQ 19 HZ 100 zaphfc: Card 0 configured for NT mode zaphfc: 1 hfc-pci

I have an ISDN card, Billion ISDN PCI Card I tried to use the ZAPHFC, I patched the kernel, I did anything (also followed reccomandation on use on Suse Linux Professional 9.2 --my box is) using bristuff last version. In the end I succesfully compile zaphfc, but I am not able to use the card (a lot of problem running zapcfg, a loto of problem starting asterisk saying about wrong anything (from

-----Ursprungligt meddelande----- Fr?n: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] F?r Terry Wade Skickat: den 19 augusti 2005 07:08 Till: 'Asterisk Users Mailing List - Non-Commercial Discussion' ?mne: RE: [Asterisk-Users] Zaphfc.ko module error Hi Remco Thanks for the response. I am running Suse 9.3 kernel 2.6.11.4-20a-default. Will check