similar to: Asterisk-OH323 no ringing

Hi all, Sorry if this has been answered previously, but I have not had any luck trying to find it. I am trying to connect my Asterisk server (1.0 stable, Fedora Core 2, kernel 2.6.8-1.521) to connect to a gateway that can only support H323. I have installed the asterisk-oh323 channel driver (version 0.6.3b) using Open H323 1.13.5 (patched as per asterisk-oh323's instructions) and PWLIB

Hello, I have installed oh323 channel driver. Outgoing calls to H.323 world do not include RFC2833 in the outgoing TerminalCapabilitiesSet despite that userInputMode=RFC2833 has already been set. Does anyone know how to make RFC 2833 DTMF relay work over oh323 channel? Kind regards, Fernando Herrera _____ De: Fernando Herrera [mailto:fherrera@iplan.com.ar] Enviado el:

Hi, I've oh323 chan installed and working to make calls from SIP to H323 devices. The problem is can no hear sound with the H323 device. I think this is some related with codecs o nat, because the H323 have one public IP from a different subnet from the asterisk box. If I use netmeeting in gateway mode, the call can be completed and I can talk with a SIP device, but in gateway mode I can not

hello i am using asterisk-oh323-0.7.1. i want to convert sip call to h323 (h323 sjphone or h323 proxy). what could be the best way for this. i am successfull in converting h323->sip by using asterisk as gateway. help required on sip->h323. kamran __________________________________ Celebrate Yahoo!'s 10th Birthday! Yahoo! Netrospective: 100 Moments of the Web

I have tried everything. to register with this gatekeeper to make and receive calls These are the details I received from the voip provider: protocol H.323 Gatekeeper Address - AVS@210.21.118.XXX Port - 1719 RAS - 53 Q931 - 80 h245 - 1722 RTP - 1722 Username - H323 I have 2 phone number/accounts with this gatekeeper that I need to register to. ID - HMA0200.10szxn-xxxx e.164 - 22xx2912

Hi, I just installed OH323 Plugin and im now tryin to make simple Configuration to connect Openphone and Xlite to my Asterisk-Server. All works fine, i just wanna know if there's a better way to do it? Is there anything wrong with my Config? OH323.conf [general] listenAddress=0.0.0.0 listenPort=1720 connectPort=1720 tcpStart=10000 tcpEnd=20000 udpStart=8000 udpEnd=8005 fastStart=no

Hello list, I have many IP hardphone like Siemens 300 basic ( old ) , cisco ata.. etc I need: G711 from old phones must be convert to G729 via asterisk and send to provider I have this problem: oh323 (last version): ------------- asterisk work with this driver ok for old phones, if I only faststart=no . But problem with codec , asterisk can speak with provider ( G729 ) only if I disable

Hello list, I have many IP hardphones like Siemens 300 basic ( old ) , cisco ata.. etc I need: G711 from old phones must be convert to G729 via asterisk and send to provider ( G729 from digium ) I have this problems: oh323 (last version): ------------- asterisk work with this driver ok for old phones, if I only faststart=no . But problem with codec , asterisk can speak with provider (

I'm following the instruction from Jo?o Amaro from the page http://lists.digium.com/pipermail/asterisk-users/2005-February/090752.html Everything went fine until I run the 'make' command under asterisk-oh323-0.6.5. I got the error message chan_oh323.c:5220: too many arguments to function `ast_channel_register' I have attached the error message. I'm running asterisk CVS

I am wondering if anyone has a working install of oh323 on fedora Core2. An replies would be appreciated as we need this urgently. Seshu Kanuri -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com]On Behalf Of steve@nexusuk.org Sent: Thursday, July 22, 2004 6:12 AM To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users]

Hi Folks, I am breaking my head for compiling asterisk-oh323 properly on my asterisk box from past 1 week. But still after my all efforts, I unable to make it compile properly, My box is Fedora core 2 with asterisk-0.9.0. I was trying for following configuration with openh323 and pwlib. Openh323 and pwlib are installed properly. But problem is asterisk-oh323. asterisk-oh323-0.6.2a.tar.gz

Send these questions to Asterisk-Users mailing list. h323.conf ################################################## ; ; Configuration file of OpenH323 channel driver ; [general] listenAddress=W.X.Y.Z ; local ip listenPort=1720 tcpStart=10000 tcpEnd=20000 udpStart=10000 udpEnd=20000 fastStart=yes h245Tunnelling=yes h245inSetup=yes jitterMin=20 jitterMax=100 ipTos=none outboundMax=100

Hi All, I have set up a box that will be used as follows: SIP Phone ----> Asterisk ----> Cisco H323 VoIP Server 192.168.1.5 192.168.1.50 192.168.1.80 Asterisk is running the latest CVS and oh323 driver. The SIP phone is a Grandstream Budgetone 100. I have everything setup and running with G.711 ALAW and ULAW and i'm able to make calls through

Abwesenheitsnotiz: [Asterisk-Users] oh323 geting voice problem g729 xeon 2.8 , fedora 1 , asterisk 1.0.6Hi All I am using oh323 with 6.6 virsion , and runing under xeon 2.8 dual with 2 gb ram, with g729 for i686 , (fedora 1). my problem is sip - oh323 - h323 (quintum) - pstn , sip party can listen otherparty realtime voice , but other party geting sip party's voice 1 sec later (not

Hello there. Is there somebody with this connection working? I can't seem to make this work at all. Could someone please share some .conf files? Cheers, Vedran. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050818/71480bd9/attachment.htm

Hello, I have something like this: SIPUSER <-sip-> ASTERISK <-oh323-> AUDIOCODEC <-e1-> PSTN After calling from SIP to PSTN (and from PSTN to SIP too) I can't hear anything only in my SIPUSER. At the PSTN side everything is OK. I have another network with another h323/sip (in the place of asterisk) and there everything is OK. In AUDIOCODES logs I see that everything goes

Joao, Thanks for sending the Installation tips as pasted below. It works. Seshu ---------- Get oh323 from http://www.inaccessnetworks.com/projects/asterisk-oh323/Libraries/openh323-Janus_patch4-src-tar.gz Get pwlib from http://www.inaccessnetworks.com/projects/asterisk-oh323/Libraries/pwlib-Janus_patch4-src-tar.gz Get asterisk-oh323 from

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, i tried to configure Gnomemeeting for Asterisk, because its, how it looks, the only tool which gifes me all i want for the use in linux... I have allready installed and running h323 support in asterisk and edited the h323.conf. But i have no chance to configure Gnomemeeting that it connects with Asterisk! I found also nothing useful in the

Good time of day all! 1) I am trying to use as5300 and asterisk. As5300 sends calls to me. I get the following in * console: -- IAX2/magrathea/6 is making progress passing it to OH323/R27464 Sep 8 10:57:59 NOTICE[1140046640]: chan_oh323.c:1159 oh323_indicate: Ignoring PROGRESS indication. As5300 user does not hear anything, just silense instead of dial tones. My config is oh323.conf

Update on this problem: I gave up on the "native" h.323 because, like others, I couldn't get audio working. (yes, I tried disabling FastStart in ast_h323.cpp - no change) So I went and got the OH323 code from www.inaccessnetworks.com. Glad to say that everything seems to work so far. Not only does audio work, but even the handshaking is now working in both OpenPhone and even