similar to: ATA 286 downgrade failure

Sorry if this has been asked before, but does anyone have any pointers on getting the Message Waiting Indicator working on a GS ATA-286? I have tried both settings on the 286's web page for sending a SUBSCRIBE to the SIP server. I was expecting the LED on the 286 to flash when there are messages waiting. I also have a mailbox=XX line in the sip.conf for the 286's extension. Anyone have

Hi people, I would like to read your suggestions as to where the issue might be. ATA286=Grandstream Budgetone ATA 286 in SIP mode. One Lan Port and one FXS port. TDM04B= 4 FXO signal fxls There is a 8FXO-to-SIP unit in this scenario that works perfectly so i will not make mention of it. PSTN----VOIPprovider---Internet---ATA286------tdm04b---Asterisk1.2.-13 Asterisk is being used as a meetme

I'ld like to test SMSes between Asterisk and an analog phone on a GS-ATA-286 (SIP). I have spent many hours trying any exemple on voip-info or mailing-list, but no message got sent from the analog phone. My goal, at now, is to send SMSes locally from and to Asterisk. Does anyone have a working configuration ?

I'm considering a situation where I buy about twenty ATA devices. I've played with the Linksys / Cisco PAP2T, and got that working fine with some inbound and outbound faxing. The web GUI was okay. I'm seeing prices around $45 to $50 for this thing. It comes with two FXS ports, but I only need one FXS. I've seen the Grandstream Handytone 286 online. It looks promising as an

I have a Lite-On 24102B burner on an Epox 7KXA (VIA 686A southbridge) together with a few SCSI disks. I recently upgraded from FreeBSD 4.5 to 4.7 then almost immediately to 4.8. I've had trouble with the burner since. With FreeBSD 4.5, I used "sysctl hw.atamodes=---,---,dma,---" to set the burner to DMA. Everything then worked fine. As far as I know it was using UDMA33.

Hi List, Just received a HT-286 Analog Telephone Adapter. This device is allows the user to take a standard analog telephone set and connect it to a VoIP/SIP based gateway. A low cost way of having PSTN devices make use of VoIP/SIP services. For example you could take a credit card processing machine and punch it into a location where you have broad band access. You could take a FAX

Hi, I was running libvirt 1.2.2 and qemu 2.0 which are from icehouse cloud archive repo on ubuntu 12.04, "virsh list --all" showed correct instances after launching several VMs, Then I just downgraded libvirt to 0.9.13 and qemu to 1.0, but kept the VMs running. However, when I run "virsh list --all" after downgrade, I can't see any VMs. Seems that the old version libvirt

Hi. I've tried Samba 3.4.3 and it upgraded my passdb.tdb file. After testing I concluded that I'm not going to upgrade to 3.4.3 yet, because 'getent passwd' was broken in recent BlastWave Solaris packages: http://wiki.blastwave.org/forum/viewtopic.php?f=5&t=447&start=0 Now, after I downgraded the Samba back to 3.0.32, client connections started to malfunction. I saw

Does anyone configure that or is that possible ? Thanks in advance -- Best regards Vlad

Somone in europe have had succes getting Callir ID showed on a phone screen conected to an Handytone 286 ? Adri? Vidal -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: text/enriched Size: 235 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20041124/e5514052/attachment.bin

Hi, I was running libvirt 1.2.2 and qemu 2.0 which are from icehouse cloud archive repo on ubuntu 12.04, "virsh list --all" showed correct instances after launching several VMs, Then I just downgraded libvirt to 0.9.13 and qemu to 1.0, but kept the VMs running. However, when I run "virsh list --all" after downgrade, I can't see any VMs. Seems that the old version libvirt

was breezing over http://voxilla.com/ Looks like a new ATA from the founder of Komodo Technology (aka the Cisco 186) Sipura SPA 2000 http://www.sipura.com/products/spa2000.htm to join the others Cisco ATA 186/188 http://www.cisco.com/warp/public/cc/pd/as/180/186/ 8x8 DTA-310 http://www.8x8.com/products/home_office/dta-310/index.asp.html Grandstream HandyTone 286

2009/3/17 Olivier <oza-4h07 at myamail.com> > > > 2009/3/16 Olivier <oza-4h07 at myamail.com> > > Hi, >> >> I'm rather new to this domain so I may be doing stupid things without >> being concious of that. >> >> I've got a Patton MATA I'm trying to setup as T.38 fax adapter. >> Whenever I connect a fax machine (Dell

Hi, Just received recently released Grandstream handytone 286 ATA for testing. I can call ATA from any other extensions and conversations seems to be of quite good quality. However placing calls from ATA is not possible at all to any extensions. After dialing there no indications of any kind from ATA at all. It just "hangs in there". ATA is behind NAT, registers to an * with public IP

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <meta http-equiv="Content-Type" content="text/html;charset=ISO-8859-1"> <title></title> </head> <body text="#000000" bgcolor="#ffffff"> <blockquote type="cite"><br> <pre

I'm trying to install 4.8 from cdrom. I get to the kernel config menu, select the first option, install without configuring a kernel, and the boot process hangs accessing the cdrom. ad0 (the hard drive) is recognized fine. The cdrom does: acd0: MODE_SENSE_BIG command timeout - resetting ata1: resetting devices .. done over and over. Finally I get to the screen "Probing devices, please

On 25/01/17 14:26, Jonathan Billings wrote: > On Wed, Jan 25, 2017 at 11:32:16AM +0000, lejeczek wrote: >> hi guys, gals >> >> do you see this: >> >> ~]$ yum downgrade samba >> Resolving Dependencies >> [...] >> --> Processing Dependency: libtevent.so.0(TEVENT_0.9.9) for package: >> samba-client-libs-4.4.4 >> >> ..and process

Marcel Moolenaar wrote am 17.03.2008 17:28 (localtime): > > On Mar 17, 2008, at 3:33 AM, Poul-Henning Kamp wrote: > >> phk 2008-03-17 10:33:23 UTC >> >> FreeBSD src repository >> >> Modified files: >> sys/sys ata.h >> sbin/atacontrol atacontrol.8 atacontrol.c >> sys/dev/ata ata-all.c ata-all.h

On Thu, Jan 26, 2017 at 11:44:06AM +0000, lejeczek wrote: > but Centos should, right? > Being able to downgrade can save you a day or a few. I know, for it did save > mine several times, eg. buggy samba new update and downgrade fixed it, etc. > We absolutely should be able to downgrade every rpm, if this is just a > matter of an opinion(I'd fail to see any other reasons to not

Use the 'downgrade' option. https://access.redhat.com/solutions/29617 On Thu, Jun 1, 2017 at 1:46 PM, Anand Buddhdev <anandb at ripe.net> wrote: > We're using ansible to configure our CentOS 6 servers, and we have a > task to install a specific version of a package: > > - name: install thrift2 > yum: name=ripencc-thrift2-{{ version }} > > In this ansible