similar to: softphone has problem to call out via X100P card

Hi all, Any one tried installing Asterisk on Linksys WRT54G? We have but facing problems with SIP to SIP calls. The phones ring and calls are established but we cannot hear any voice at all. I tried allow=all in the general section but did not work. So I forced ulaw. Can any one please check it out and let me know what is wrong? Here are the conf files: Asterisk Version: Asterisk

Hi, I configured asterisk on redhat linux 9 box. I installed two different ip softphones (SJPHONE and X-PRO) and got them registered with asterisk. The call from one phone to another does get routed via asterisk, but there is one problem coming up. As soon as call is accepted by the end user , it is automatically disconnected with the error "cannot align media streams". If I enable SIP

I have a few SIP phones, Cisco 7960s, and was looking into implementing some compression, ala G.729. I'm looking into purchasing a g729 licenses just to get an idea of performance and voice quality, over lans, wireless and single channel isdn. Does anyone have positive/negative experience w/ getting licenses/support from Digium? Hows the sound quality compared w/ g.711? Is 729 better

Hi, I am very new to Asterisk. I wanted to know how to retrive the Voicemails. I could see some voicemails assosiated with some extensions. Any ideas?? --------------------------------- How much free photo storage do you get? Store your holiday snaps for FREE with Yahoo! Photos. Get Yahoo! Photos -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi list, i've problems with my * server and the 4 phones which are linked to it. i've 2 grandstream bt100 with the firmware upgraded to 101, a wi-fi phone (i don't know its brand) and another ip phone i don't know its brand. with this sip.conf : [general] port = 5060 bindaddr = 192.168.100.229 context = default ;x changed from default to sip localnet = 192.168.100.0/24

Hi; I have entries as below in DB, mysql> select * from sip_buddies; +----+------+----------+------------+---------+------------+--------+------- -----+------------+----------+------+ | id | name | context | defaultip | host | mailbox | type | regseconds | ipaddr | username | port | +----+------+----------+------------+---------+------------+--------+-------

I'm trying to see if this is even possible. When you dial ext 2000 I want it to ring my sip phone for 20 sec then call my cell and let it ring for 10 sec if I do not pick up the call on my cell I would like it to go back to * and leave a voice message for me. Here is what I have so far in my extensions.conf Everything works except the call will not go back to * after the 10 sec rule has

Hi Folks, I am newbie to asterisk. Recentely I have installed asterisk on Linux Fedora 2 box. After reading some document, I tried to configure the server. When I connect to our server, SIP user-agent shows that I am logged in. But it doesn't show my system(client) IP when I issue command at astrisk CLI. The O/P is as below. *CLI> sip show peers Name/username Host

hi do u have the sip phones extensions in the extension.conf and are they in the right context (sip-incoming)??? are the sip phone registering to asterisk?? try stop asterisk and reconnect as asterisk -vvvvvvvc to check see them registering... ________________________________ From: asterisk-users-bounces@lists.digium.com on behalf of Sistemista WebSolvingJaa Sent: Fri 7/1/2005 6:43 PM

Hrm, All of a sudden for some reason Wait() and Playback() are returning non-zero and its causing calls on my inbound SIP leg not to complete. I'm not sure why -- Executing Answer("SIP/2181-4518", "") in new stack -- Executing Playback("SIP/2181-4518", "silence/1") in new stack -- Playing 'silence/1' (language 'en') == Spawn

I have 2 X100P card and configured everything based on configs here http://www.onlamp.com/onlamp/2004/01/22/examples/config_files.txt I changed the area codes to match mine. When I try to dial out I get app_dial.c:554 dial_exec: Unable to create channel of type 'Zap' A zap show channels gives me this Chan Extension Context Language MusicOnHold 1

Hi All We are unable to hear any voice where as in tcpdum it shows that RTP is flowing both ways ERROR CONDITION --------------- -- Executing Dial("SIP/2001-f6c4", "SIP/2000|20") in new stack -- Called 2000 -- SIP/2000-0ead is ringing -- SIP/2000-0ead answered SIP/2001-f6c4 -- Attempting native bridge of SIP/2001-f6c4 and SIP/2000-0ead Have searched web and

I think I have it configured properly. ztcfg -vv shows it as channel 1 and zttool shows it as OK. But I can't dial out. When I try, it shows it arrive in teh right stack, but then issues the following errors: channel.c:1676 ast_request: No channel type registered for '{PSTN-1}' app_dial.c:554 dial_exec: Unable to create channel of type '{PSTN-1}' = = Everyone is busy at

ERROR CONDITION --------------- -- Executing Dial("SIP/2001-f6c4", "SIP/2000|20") in new stack -- Called 2000 -- SIP/2000-0ead is ringing -- SIP/2000-0ead answered SIP/2001-f6c4 -- Attempting native bridge of SIP/2001-f6c4 and SIP/2000-0ead Have searched web and archive w/o good results. Thks in advance for any help, Dave sip.conf -------- [general] port =

I have put together this call forwarding and dnd config: I'm sure it can be dome with macro's but I couldn't figure that out... anyone care to input. 74 Turns DND on my phone will not ring, drops caller to voicemail... 73 Turns DND off 72+ext forward your extension to another extension and voicemail is left at the forwarded extension. 71 turns off call forwarding. ; dnd Could

I have just installed * from the latest CVS and I can make calls via X-Lite to outside numbers but for only 30 to 35 Seconds at a time then Broadvoice will hang up on me but X-Lite will not know it. Once I hang up X-Lite then I will get the following error message: Spawn extension (default, Number-I-Dialed, 1) exited non-zero on 'SIP/200-6a22' -- Got SIP response 404 "Not Found"

Hi, I am using the Grandstream HandyTone 486 as a SIP Adapter with a regular phone. Asterisk configuration is listed below. When I attempt to place a H.323 call, I receive the following errors: - Executing Dial("SIP/2000-3029", "OH323/##########@xxx.xxx.xxx.xx:1720|20") in new stack Aug 13 09:13:03 WARNING[20497]: channel.c:1806 ast_request: No translator path exists

When somebody call me on my pstn # cable connected to my fxo card it does not work when I check my computer the following error shows Connected to Asterisk CVS-v1-0-12/05/04-19:46:25 currently running on asterisk1 (pid = 2160) Verbosity is atleast 3 -- Remote UNIX connection -- Starting simple switch on 'Zap/1-1' == Starting Zap/1-1 at incoming,s,1 failed so falling

Problem I have is this. outside firewall (extension 2003) can call me inside firewall (extension 2000) and all is fine. If I call from inside firewall (extension 2000) to outside firewall (extension 2003) I hear no ringing and person at other end can pick up and I hear for maybe a half second then I go to voicemail. If I add another extension on the outside then communication between outside

I am just starting out with * so bear with me please. I have tdm400p with 4 fxo modules on it. When I call into the asterisk box from my mobile, I can see the asterisk console picks the call up and routes it to my computer with x-lite. There was no sound coming from either - just silence. I then decided to route it directly to voice mail to see if that would narrow the problem down, but it