similar to: SIP registration timeout

> > I've tried setting up my sip.conf in two ways: > > > ------------------------------------------------------ > register => [240xxxxxxx]:[my_password]@sip.broadvoice.com > > > [Broadvoice] > type=peer > username=[240xxxxxxx] > fromuser=[240xxxxxxx] > secret=[my_password] > host=sip.broadvoice.com > context=incoming >

Hi, I have two accounts with broadvoice. Now, I want to be able to distinguish between them. I though that this would be simple by adding "/EXTEN" at the end of the register statement. For example: register => num1:pass@sip.broadvoice.com/1000 Unfortunately, this is not working. When I call into my box I hear busy tone. My config looks like this: [root@voip asterisk]# cat sip.conf

I finally got my incoming and outgoing to work on Broadvoice with a configuration file that is no where close to the one given by them. Here it Is (sip.conf). For others who have a working config could u please share so that I could compare. Thank You [broadvoice] type=friend username=[number] fromuser=[number] secret=[password] host=sip.broadvoice.com fromdomain=sip.broadvoice.com

Since Thursday evening my asterisk box has been failing to register with broadvoice. I haven't changed any of my config files in the last week. Can anyone suggest anything? Asterisk is reporting: *CLI> Aug 28 16:15:17 NOTICE[6150]: chan_sip.c:3914 sip_reg_timeout: Registration for '703XXXXXXX@147.135.8.129' timed out, trying again -- Got SIP response 404 "Not found"

Hi list, I have for a year I have an account to call with broadvoice from about 3 days beginning a not registered problem of, asterisk shows to a message of error with the DNS, and my dns this working fine WARNING[5770]: chan_sip.c:7595 transmit_register: Probably a DNS error for registration to 908XXXXXXX at sip.broadvoice.com@sip.broadvoice.com, trying REGISTER again (after 20 seconds) [Dec 16

-------- Original Message -------- Subject: Re: [Asterisk-Users] BroadVoice configuration changes for Outbound Date: Sun, 06 Mar 2005 19:11:22 -0500 From: MF Hulber <mark@hulber.com> To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users@lists.digium.com>, dan@mirrorlynx.com References: <200503060703.XAA12457@comand.net>

All, I signed up for a broadvoice BYOD plan over the weekend (very excited about their offering) and after about an hour I had asterisk registered and was making in and out bound calls. However, the next day (without changing anything) I couldn't call in or out and haven't been able to get it going again. I can connect using a softphone (X-Lite) and make calls in and out

Connecting to proxy.dca.broadvoice.com Calls all of a sudden cannot be completed. Cannot ping proxy.dca.broadvoice.com Changed to proxy.chi.broadvoice.com pingable, but now get the following: Got SIP response 500 "Internal Server Error" back from 147.135.12.128internal error Called Tech Support... get dead air then carrier busy signal. Anyone else having

Hello All, I'm just getting into *, and trying to use a Broadvoice account. It works inbound, but Outbound fails no matter what sip.conf parameters I try. From the recent posts here I think it could be: A bad CVS release - I will try to download and build from a new one Broadvoice not challenging and/or Asterisk not responding with an Authorization: in the INVITE header. I am

I have searched the list and cannot find a sip 400 solution posted that solves my problem. If anyone has any thoughts or suggestions on the following I would greatly appreciate it. I didn't have this error before Broadvoice made their changes this weekend. Now when I make a call it connects but, I cannot hear anything on the other end... The full message I have is: 8 headers, 0 lines

Using AMP, the configuration I have used to work fine with Broadvoice. Now it gets a busy signal every time. I've checked "sip show registry" and it says it's registered just fine. I've tried "sip debug" and it shows calls coming in, but they always get a busy signal & I can't tell why. Here's a SIP Debug output: Sip read: INVITE

I've tried everything with the * box after this weekend. I have read every document on the problems people are having with them after this weekend as well, but none of them address my problem. I checked my settings in my sips which I have below as well, I have changed the host file a few times, but this was new to me and I never had modified it before. I have and the same results

Hi, I can't make outgoing calls via Broadvoice. I have tried each and every configuration that was posted to list previously. I am able to receive incoming calls fine. I get the following in asterisk console: ===================================================== asterisk*CLI> show version Asterisk CVS-HEAD-03/10/05-22:51:28 built by vicky@asterisk on a i686 running Linux

Hello, Have a weird problem when using asterisk (1.0.6). There are certain numbers I cannot dial when using asterisk with my broadvoice account. No problems with inbound. With outbound calls, I can call some numbers (for example broadvoice customer support number) and unsuccessfully with some. However, when I configure my account directly on x-lite, I dont see these outbound problems. Here is a

I have been going crazy with this also since Sat. Our server was working perfectly with BV but will now not place calls to BV. Incoming from BV works fine. I felt sad rebooting it today, it had been running for almost 200 days! Here is my error message from the console... Notice I am running today's CVS Connected to Asterisk CVS-03/08/05-14:32:39 currently running on com (pid = 1624)

Hello guys. I am a fairly new user to Asterisk, and I'm just having a tough time. My goal is to set up a VOIP PBX. I have signed up with a BroadVoice number, and I have three systems with SIP phones. The PBX and the SIP phones are all behind a Cisco PIX running NAT. I am using Asterisk CVS version from yesterday. I also tried 1.0.3 with little luck. The SIP phones are two X-Lites on

Ok, My provider is sending a call to me via ULaw but Asterisk isn't picking up on this, I've only allowed ulaw, I disallow=all and then allow=ulaw in my sip.conf and that's the only thing I allow, but when my provider sends me the requests, I get an error about No Compatible Codecs: 17 headers, 8 lines Using latest request as basis request Sending to 67.19.245.213 : 5060

Is the Broadvoice service up? I just signed up with them and started receiving calls in no time but could not make calls. And after a few minutes I cannot even place calls. register => [number]:[password]@sip.broadvoice.com [broadvoice] type=peer fromuser=[number] host=proxy.lax.broadvoice.com fromdomain=sip.broadvoice.com context=from-broadvoice dtmfmode=inband any help would be

I have an idea, tell me if this wouldn't work... I know it's really ugly, but it might help some people until we can get round robin DNS checks for peers... Since * does not do GetHostByName() again until you reload your config, and BroadVoice and I'm sure other sip providers are using round robin DNS, why not create 2 [<your server here>-out] contexts in sip.conf, and then in

*sigh* Ok, I have fought and fought with this. I have read all the FAQ's, I have scanned the list archives. I can receive calls on * from my Broadvoice acct, but I cannot place calls... I have the 'World Unlimited' plan, and like 5 area codes that are local to me in Dallas. Can anyone help me? here are my config files... - sip.conf - [general] context=default ;