similar to: arrgghhh dialparties.agi

Hi, I set up a ring group. I would like for people who select a certain voice menu option to ring a list of extensions (I have just one extension in there at the moment) and if it doesn't answer to go to an extension's voice mail. I am using a version of asterisk from CVS, last updated a couple of weeks ago. This line in extensions_addtional.conf sends the call to ringgroup 3 if

Hellos, I have asterisk 1.2 and freepbx 2.3. I have edited the agi script(dialparties.agi). Everytime I restart asterisk, the file gets overwritten. How do I make sure my changes are not overwritten? What generates dialparties.agi? Thanks -- Best Regards, James Mutuku Ndeti Agile Systems Limited +254722490994 www.agile.co.ke mutuku.wordpress.com Has your organization implemented a customer

Running Asterisk Head 1.0.9. Below is a trace of a call delivered to my system which had no caller ID. For some reason, dialparties.agi shoves the incoming provider's IP address into the caller ID so you never have a call that is screened for PrivacyDirector. Is anyone else seeing this issue as well? Have I missed a patch? This call shows on the display with a name of "Unknown"

Hi, I'm using AMP and its dialparties.agi as most important script in system. I'd like to port configuration to more embedded system, where I don't have Perl available. So I'd like to implement dialparties.agi functionality as closest as possible with dialplan language..... Are there any existing dialplan scripts-examples that are close related to dialparties.agi

Hi, I'm trying to edit an AMP-derived dialplan: the macro "dial" uses the AGI script "dialparties.agi" to find the extension to call. I'd like to drop this script: does anyone can explain me what is its main job? Thanks -- Domenico Viggiani

Hi, guys, For my server, if i use my handphone to call in the PSTN line by TDM400p card, the server could not receive the caller id correctly. anyone knows the problem? I am currently using asterisk 1.2.14 with freepbx 2.2.1. The CLI is as below, "Caller ID name is 'zap1' number is '4521'" , this 4521 is one of my FXS zap extension created. dialparties.agi: Starting New

Skipped content of type multipart/alternative-------------- next part -------------- asterisk1*CLI> soft hangup Zap/1-1 Requested Hangup on channel 'Zap/1-1' == Spawn extension (macro-exten-vm, s-BUSY, 2) exited non-zero on 'Zap/1-1' in macro 'exten-vm' == Spawn extension (ext-local, 220, 1) exited non-zero on 'Zap/1-1' -- Hungup 'Zap/1-1' --

I have Asterisk 1.2.29, Zaptel 1.2.24 and Freepbx Setup for a queue up to 15 agents through a PRI line, it was working fine for more than 1 year, suddenly, when there is a load on the queue, the asterisk service disconnects and the calls are dropped. And the service starts again after few seconds, and so on. I am not using fax. I checked PRI by zttool and there are no alarms. The cdr logs

I am using asterisk version 1.2.6 with Zaptel version 1.2.5. I have a POTs line coming into a Digium TDM01B. It appears to not be getting CID at all. If I hook up a POTS phone to the line CID comes through fine. Inbound and outbound calls work fine but there is just no CID on inbound for this channel.The incoming route for the channel is Zaptel Channel 0. No DID or CID settings applied. My IP

Hi people, I have the following dialplan, but it doesn't have the behavior that I think it should have. [default] exten => 2001,1,Answer exten => 2001,n,Dial(local/3005) exten => 2001,n,Hangup exten => 3005,1,Set(__RINGTIMER=10) exten => 3005,n,Macro(exten-vm,novm,3005) exten => 3005,n,Hangup When I execute the Originate (AMI) with the argument Channel=local/2001, It rings

I have installed my first Asterisk implementation using the Asterisk@home ISO. I am using the SJPhone software. Using the setup page, I have been able to configure two extensions. Whne I dial from one to the other, the other does not answer even though it is registered. Watching the log in the CLI, I can see that recorded messages are being played;: == No one is available to answer at this time

Hi This is hard work :) I have read the Asterisk Handbook, BudgeTone User Manual, Andy Powell's useful notes, Zac Sprackett's Asterisk Resource Pages and more. I am not a linux newbie but am new to Asterisk. I have failed to find any docs that explain how to get a very very simple, minimal, system up and I am trying to get the following to work: 2 BudgePhone 102D connected on a LAN to a

Hello, i've recently switched over from 1.0.9 to 1.2.3. I've experienced some (to me) weird behaviour. This is the config for an example queue.conf: [654] wrapuptime=30 timeout=20 strategy=ringall retry=5 queue-youarenext=queue-youarenext queue-thereare=queue-thereare queue-thankyou=queue-thankyou queue-callswaiting=queue-callswaiting music=default monitor-join=yes monitor-format=

Dear, I have asterisk 1.6.2.13 in a small hardware PBX (512 GB RAM and Celeron), and last days when I call from one extension to another of the same PBX after I dial the number the rings sound after 20 seconds. In the CLI log, when I debug the AGI, I see always goes good until dialparties.agi, and after that there are 20 seconds without any log, and so the ring sound. I've read

Hi to all I've mada up my mind and i tried to change from i4l to chan_capi, following some councelling from the gurus. I compiled it up, and when i try to load it in modules.conf, i get that wonderful message and Asterisk does not start: [chan_capi.so]Feb 17 09:21:40 WARNING[16384]: loader.c:239 ast_load_resource: /usr/lib/asterisk/modules/chan_capi.so: undefined symbol: ast_get_group Feb

Hi, maybe a dumb question, but it seems that some calls are directed to our central dial in number despite the extensions the callers say they dialled. E.g. they dial 1234-567, asterisk recognizes 12345, it says this is an unknown extension, where it is right, and redirects the call to the central dial in extension 1234-0. This only seems to happen when the numbers are dialled manually. When

Can anyone point me in the right direction for correcting errors on an HD when using LVM? I've tried e2fsck and indicates bad block. I've tried with -b 8193, 16384, and 32768 and no good. I've found some info about reiserfsck on google, but this utility doesn't seem to be included in Centos4.3. I did find it on my old FC1 box. I am thinking now I really should have went with

Have asterisk@home 1.2.1 The server is on an internal network eg 10.10.10.10 It is NAT'd 1:1 via Checkpoint firewall to external public IP eg 50.50.50.50 The remote IAX2 phone (ATCOM320) is configured to call 50.50.50.50 on extension 1055. Outbound calls to 1055 work perfectly. Inbound calls from 1055 get picked up as if it were an external call (see below) and goes straight to the ring

When I make a call out on the Faktortel number I am then able to transfer to call to my asterisk meetme room of 801 by hitting 'transfer' then '801' then 'send' on my grandstream phone. This connects my faktortel trunk (and who ever is on the other end) to my conference room I can then make another call using my local pstn service and set up a 3 way (or whatever number

Hi Everyone, I have an asterisk box in my office. It does not display the correct Incomming Caller id. For incomming we are using ISDN Bri line which is terminated in a Digium 4 port bri card (B410P). Like if a number say 02 12345678 calls to our line asterisk displays it 12 12345678. Similarlay if a mobile number say 0416 123456 dials us , asterisk displays 1416 123456. I am not sure where the