Displaying 20 results from an estimated 10000 matches similar to: "PRI and echocancel"
2005 Jun 20
1
Looking for PRI Outbound Caller ID Configuration
I'm having trouble setting the outbound caller ID on calls I make from my
PRI trunk group. The PRIs are served out of a 5ESS. Telco has set the PRIs
up for user provided caller id information, so I believe I just don't have
it set up right in my dialplan or something. I can't seem to find an
example of setting the outbound caller ID specifically for a 5ESS. Does
anyone have an
2005 Sep 30
2
Echo Cancellation not working in Zapata.conf
I have echocancel=yes in zapata.conf but when I do a zap show channel 1,
I notice echo cancellation is turned off.
I followed the article that talks about the order in which the
statements need to be in zapata.conf to get echo canceling to work:
http://lists.digium.com/pipermail/asterisk-users/2005-June/110615.html
But it is still not working. Does anyone know how to get echo
2006 Apr 27
12
PRIs from two different telco
My TE411p does not seem to like to have two PRIs from different telcos
(span 1 and span 2). I can get one working, but not the other. However,
if I use vpmsupport=0 when loading the wct4xxp module, they both work.
But here is the problem, vpmsupport=0 disables the on board echo
cancellation. Any ideas?
BTW, here is zaptel.conf
span=1,1,0,esf,b8zs
span=2,2,0,esf,b8zs
bchan=1-23
dchan=24
2004 Dec 05
3
PRI configuration problem
We've been working for the past 2 weeks to get a new V400P working with
our PRIs from the telephone company. We're trying to get the Asterisk
server setup as a VoIP gateway for SIP and AIX. We can make SIP-SIP
calls, but all calls from or to the PRI fail. This is the applicable
entries from the Asterisk log (configuration files follow) for a call
coming from the PSTN on the PRI. I
2006 Apr 10
4
callerid name inboune from PRI
I switched PRI vendors recently, and one of my questions was "do you provide caller ID name in addition to number?"
AT&T Local did not, But XO communications said they did.
Before I call to complain, is there an setting to turn this on in asterisk?
I want to make sure that I have my side covered before I call XO.
My current zaptel.conf is:
context=from-pstn
switchtype=national
2005 Oct 11
3
Dual PRI fail over
I currently have a single PRI however we are getting a second PRI, and the
provider (qwest) wants to know if our PBX supports GSAS (they say its a
redundant d-channel technology but searching on google for GSAS reveals less
than nothing). I've set something similar up before on a cisco 5350, where if
one of the PRIs fails, all of the calls destined for either PRI will be routed
down the one
2009 Jul 09
1
PRI failover to SIP trunk
Hello,
I've found a little documentation on voip-info and on the asterisk-
users list, although I was hoping for an example of a tried-and-true
failover setup between PRI and SIP.
We are an outgoing call center that uses asterisk 1.4 connected to 2
PRIs from the local telephone company in one group (g1) and a SIP
trunk from bandwidth.com. The PRIs are the primary outgoing service,
2007 Apr 19
2
3rd T1 of quad card won't change signaling
Hello,
I'm trying to set the 3rd span of a new digium quad card as
a E&M T1 for Faxes to a Hylafax server. The 1st and 2nd
spans are working as PRIs. When I start asterisk, the logs
show a signaling error and chan_zap.c dies. I also get an
error that it can't read the gains but they are the
standard shown below.
2.6 kernel, Debian Stable, * 1.2 svn from feb 2007
my procedure:
make
2006 Jan 05
3
Fax with Asterisk and Sipura 2100
I know the subject of faxing has been covered in some detail, but I was
wondering if anyone has a hardware configuration similar to ours that
has faxes working successfully and would be willing to share any
settings/insight.
We are unable to fax reliably with a Sipura 2100 connected to Asterisk.
We do not route calls over the Internet and our network has very low
latency. The Asterisk
2004 Jul 28
3
Asterisk, PBX, VoIP and PRI
Hi everyone, I'm new to the list, so I apologize if this is a trite
question. We're an ISP with a barely used PRI, and also currently use
asterisk with POTS service on an audiocodes gateway. We have a notion
that we want to take on a new revenue stream, with our model being as
such:
1) Convert one of our PRIs into a two way voice/data bundle.
2) Plug this PRI into a piece
2009 May 06
4
shut down a single PRI on a running Asterisk system?
Excuse me if this is in the archives or on the net somewhere - I really
did search. ;-)
We are wondering if there is any way to shut down a single PRI without
having to down Asterisk and/or interrupt other running PRI circuits.
We use Asterisk servers with 4 port Digium PRI cards. In the last few
days we ran into a situation where the 3 of the 4 PRIs were operating
fine and had live
2008 Sep 10
2
Bell Canada (Nortel DMS100) PRI Outbound CNAM issue
Hi Folks,
I'm trying to send CallerID Name information out to the PSTN via a PRI
with Bell Canada with no success. With inbound calls (originating from
the PSTN) CNAM is received successfully, and we've not had any similar
problems with other Telco PRIs, so I'm stumped.
2008 Jun 10
4
Problems configuring a PRI...
I'm trying to get a Qwest PRI configured and working with my lab
Asterisk server. They said that the switchtype is 5ess and the signaling
is pri_cpe. My entries into zaptel.conf are:
span=1,0,0,esf,b8zs
bchan=1-23
dchan=24
loadzone = us
defaultzone=us
channels=1-23
And my entries in zapata.conf are:
language=en
context=telco-incoming
switchtype=5ess
signalling=pri_cpe
2005 Jan 13
5
PRI concentrator
Hey gang,
We currently have a class 3 switch (CSX) that..well..it sucks. It does
terrible CDR writes, doesn't support LCR, the list goes on and on. We want
to replace this with several asterisk boxes each running one or two 4 port
PRI cards.
The problem is: I can plug in 20 PRI lines into the CSX (from PSTN) and
have 1 come from CSX into asterisk. If 1 call comes in on each of the 20
pris,
2007 Dec 02
1
T1 Timing Troubleshooting
I'm having (I think) timing issues in relation to bridged T1-T1 calls via dynamic spans. Fax calls are intermittently working, but voice is fine. My box has a Sangoma A400 inside it as the primary Zaptel timing source. My T1 PRIs that are hooked to the box come in via a foneBRIDGE2 (dynamic TDMoE spans). PRI #1 is the telco and PRI #2 is an existing Comdial FX-II. For some reason, bridged TDM
2003 Dec 01
2
PRI maintenance commands
With multiple inbound PRIs (and hunting across them) coming to multiple
[asterisk] servers it is important to be able to do administration, i.e.
control which PRIs in the same hunt group take (and which don't take)
calls from telco at any given period of time.
Our pre-asterisk platform uses SERVICE commands for this purpose to put
B-channels
into 'out-of-service'/'maintenance'
2006 Apr 25
3
56K Dialup and VOIP over same PRIs
Anybody have suggestions on having a 56K dialpool and VOIP
connections with an Asterisk box over the same set of PRIs? We've
done the PM3 with PRIs for just dialup, but are looking for a way to
integrate our Asterisk box and move our voice calls onto the same PRIs.
Ian
--
Ian White
Victoria Free-Net Association
email: iwhite@victoria.tc.ca
http://victoria.tc.ca/
2007 Feb 13
4
Nortel 81C MSDL Trunking to Asterisk TE110P, Nortel Resetting PRI Channels
We are currently working to trunk from a Nortel 81C to an Asterisk
Server 1.4 running on Red Hat Linux. We have two PRI trunks which work
with the exception of the clock slips, which is causing the Nortel to
reset the PRIs once a hour. Thanks for any suggestions.
81C MSDL Asterisk Digium
TE110P
REQ prt
TYPE adan dch 10
2004 Aug 25
2
GrandStream HT-486 ATA as VoIP Gateway
Hi,
Can I use HT-486 as VoIP Gateway together with Asterisk?
Are there any success experiences?
--
Best Regards,
Miroslav Nachev
2004 Sep 27
1
PRI fields
Is there a way in asterisk to find the information in more than just a
PRIs callerid field? for example the charge digits (who is paying for
the call) and the original dialed digits, before any digit translation
or forwarding?
G. Phil