similar to: Dutch VOIP-PSTN provider

Hi all, I registered a SIP account at budgetphone.nl/talkin2ya.nl Receiving calls works like a charm, I even redirected my normal PSTN number to the number I got from them so everything ends up in my * server. Before I ask them to take over my normal phone number I wanted to test all of it, so I ordered some calling minutes to test. Now I cannot get outbound calling to work with them. Anyone here

(this time with subject....) Hello, I?m trying to get Asterisk to accept incoming calls from budgetphone.nl. When I dial my budgetphone nr on a PSTN KPN line it immediately gives a busy tone. I tried X-lite, which worked perfect, so my modem (with nat) probably is not the problem. I did a sip debug and got the following output. Because I?m new to Asterisk I can?t get the error why this is not

Hi all, I've been searching the wiki and google for a couple of days now but cannot find any reference to a timing source on OpenBSD. I have * CVS-v1-0-02/15/05-21:54:52 (I always do a cvs -q up -Pd before compiling) running like a charm on OpenBSD 3.6 Now I want to setup some IAX trunks to work and 3 friends and some meetme rooms but it looks like I need a zaptel timing source. Anyone can

This is pretty OT but since I got a lot of info from the wiki I thought let's ask here. I'm now running 2.4.29 kernel so I can apply the patch to enable multiple fritz pci isdn cards with the CAPI driver. Anyone has done this with a more up-to-date kernel ? (2.6) Thnx. -- Michiel van Baak http://lunteren.vanbaak.info michiel@vanbaak.info GnuPG key:

I have an analog GSM Gateway that is connected to a normal SIP ATA device. Basically what it does is this : when you call the extension nr. of the SIP ATA port, the GSM Gateway will pick up the phone and presents a (new) dial tone, and then dials whichever DTMF tones it received. The SIP ATA ia a Grandstream HT286. I would like to use the GSM Gateway to route my outbound cellular calls, how

Hi all, My BRIstuffed 0.2.0-RC7k is running fine on my debian box for voice calls over ISDN2. Now I want to implement receiving incoming faxes into my setup so I did a google and some reading on the wiki. I got the spandsp 0.0.2pre10 package compiled and installed, patched asterisk's apps makefile and compiled * again. This all worked out fine. When integrating the RxFax into my dialplan the

I would like to hear stories from people using TAPI, CTI or CallerID software with Asterisk. What are you guys using, setup examples, etc. Has anybody sucessfully integrated SugarCRM with Asterisk and how did you do it. Are you running callerid software? Did you stumble into problems like using tapi and callerid software returned both the callerid and calledid? Hope you can help me out with

Hi, Anyone here using sipgate.de ? It worked for months, but for a couple of days now I'm unable to register with them. My account is ok, because I can login to the website. Asterisk keeps showing me: Feb 25 23:50:18 NOTICE[5144]: chan_sip.c:5269 sip_reg_timeout: -- Registration for 'XXXXX@sipgate.de' timed out, trying again (Attempt #n) I looked at the sip debug stuff, and all I

Heya list, I need some advice/experience. Some of our customers are asking us about DECT solutions for their asterisk install. Some others will not go to asterisk if there won't be a DECT solution. They now have a Siemens or a Samsung PBX. Those PBX-es come with a DECT basestation and optionally repeaters etc. All those basestations speak some own protocol to the PBX, so we cannot use them

Does anyone know if the 7912G (which the wiki says can do either sccp or sip) uses the 7940/60 sip firmware? I ask this because the only firmware I can seem to find on TAC for the 7912G is sccp, no sip...if it takes it's own firmware and doesn't use 7940/60 firmware, can someone point me to the right location for it? Thanks, Marty Mastera M3 Resources marty@m3resources.com Phone:

Wow. My message made it to the list after more than 3 hours. Philipp -- amooma GmbH - Bachstr. 126 - 56566 Neuwied - http://www.amooma.de Let's use IT to solve problems and not to create new ones. Asterisk? -> http://www.das-asterisk-buch.de Gesch?ftsf?hrer: Stefan Wintermeyer Handelsregister: Neuwied B 14998

Hi, Anyone here has any experience with the Nokia E70 and asterisk ? I read on the nokia website this phone is capable of talking SIP and do Presence based on SIP/SIMPLE. Please share your experience, I'm thinking of getting one but want to be sure I can use it with * before I do. Thnx. -- Michiel van Baak michiel@vanbaak.eu http://michiel.vanbaak.eu GnuPG key:

A friend of mine just sent me this email - he is looking for an IAX inbound service in Holland - any thoughts? Voip info only has Nadiz which seems to be SIP only. Hi Dean, I need a Dutch number with IAX support. Do you have any leads in that direction? It's been difficult for me to figure it out -- especially since most of their sites seem to be in Dutch... Regards,

I would like to have asterisk pass along the caller ID phone number to a database server on a my local network (the same network that the * server resides on ) so that our customer service app. can pull up customer data automatially. Asterisk passes along caller ID to the phones fine, can someone tell me how to make it pass this info to my database server? Any suggestions would be greatly

Hi all, I been searching on the wiki and google for ENUM in NL. All I could find were some docs from the Dutch Financial Department about taskforces and plans. But it all links to dead pages and no-longer-connected phone numbers. Is there anyone who knows some more about Dutch ENUM stuff ? If it's all dead, anyone interested in setting it up together with me ? Hope to get some answers,

Hey, We have asterisk 1.2.4 (old I know) with a couple of snom phones, a couple of grandstream phones and around 65 philips dect stations. Now the problem: All calls do peer to peer RTP except the calls from dect station to dect station. snom to dect or dect to snom do peer to peer. So the sip config looks fine because all the 'static deskphones' honor the REINVITE and start talking to

Hey all, I was wondering if anyone knows about a Mexican ITSP I can connect to to route calls from and to my * boxen. If it matters: I'm located in The Netherlands and one of our customers is in Mexico so if we need a Mexican presence that is not an issue. Thanks. -- Michiel van Baak michiel at vanbaak.eu http://michiel.vanbaak.eu GnuPG key:

MD -----Original Message----- From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Michiel van Baak Sent: September 12, 2008 2:08 PM To: Asterisk Users List Subject: Re: [asterisk-users] Setup speed dials on Cisco 7921 On 13:15, Fri 12 Sep 08, OCG Technical Support wrote: > I've added lines like this: > > > >

Hi, here what i have: [2001]--[Asterisk]---[ISDN-Trunk]---[PBX]--[8004] Eicon Diva 4BRI Card to a PBX. Asterisk is running in version 1.0.0 on RedHat Enterprise Linux 3AS with kernel 2.4.21-4.EL. Dialing from Astersik extension 2001 to PBX extension 8004 via ISDN Trunk gives me the following error, -- Executing Dial("SIP/2001-8a8e", "Modem/ttyI0:998004|20|r") in new stack

Hi to all, I and using asterisk with following setup. 1. TDM400p card with four FXS modules, so there are four analog phone lines on four zap channels, My setup is working fine. And version is like such Asterisk CVS-v1-0-11/27/04-20:48:45 I want your guidance for the following issue. with help of agi scripts i am able to insert caller id number in database of mysql now i want to pop it up via