similar to: Supermicro P4SGA board?

I'm wondering if anyone has had any good/bad/indifferent experiences with Supermicro P4SGE P4 FCPGA motherboards and Digium cards? I'm looking to use this MB in an E100P E1 card solution, and I haven't had the ability to test with that configuration before I ship a system overseas (since I don't have an E1 to plug into it, it's hard for me to test, and I don't have

Guys. Anybody using supermicro mobos and chassis with TDM cards? I would like to know which models are you using (mobos and chassis and also CPUs) and how many TDM cards have you been able to put in without having IRQ issues like in other cases. Ive read supermicro servers play nice with asterisk but it is always good to ask I guess. Thx! AK

Hello folks, I'm having a difficult time trying to figure out why the CPU cooling fans run at full speed on my Supermicro X8DAL-3 motherboard. There doesn't seem to be any variable speed (the fans are PWM compatible) ... they either idle at almost nothing, or suddenly burst into a high-pitched scream that gets my ears bleeding after a few seconds. Once they jump to warp-10, they

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 1) Has anyone been able to get their AIC-9410 controller recognized in CentOS 5.3? I'm working with a Supermicro X7DBR-3 motherboard. It has 2 "ICH Raid Codebase" options in the Bios (Intel and Adaptec); neither of which seem to change Linux's behavior. The interesting part though, choosing either Adaptec or Intel, then performing

Eve.8ryone, I have had a SuperMicro machine running Centos 5.8 that had been progressively updated with yum-cron from a 5.0 CD install. I upgraded the SuperMicro with more memory, switched out the CD with a DVD and tried to boot to the Centos x64 6.2 dvd. My plan was to test the memory before I added the hard drives, but I could not I could not get the machine to boot from the disc. I also

I have a weird situation with a new installation of CentOS 5.4 x64, on a SuperMicro X7SBI server. The server has a <a href=" http://www.supermicro.com/products/motherboard/Xeon3000/3210/X7SBi.cfm" target="_new">SuperMicro X7SBi motherboard</a>, board ATI ES1000 and Core2Quad Q9505 CPU. The kernel is When I login to the console, using a "17 CRT monitor

Has anyone made spandsp to work with a digium tdm fxo card? I finally got the rxfax and txfax modules to compile, the spandsp lib installed (and in the libpath), and now receive: -- Starting simple switch on 'Zap/1-1' -- Executing RxFAX("Zap/1-1", "/var/fax.tif") in new stack -- Hungup 'Zap/1-1' I've tried to adjust rxgain/txgain in

There was recently a thread on this mailing list regarding SuperMicro hardware and CentOS. Here is one of the posts: http://lists.caosity.org/pipermail/centos/2005-January/001503.html My question is about the P8SCi motherboard, a fairly new SuperMicro model. The vendor's specifications page mentions Linux but I would rather hear from end users and their experiences. Here is a URL:

CentOS Guru's, I am trying to get supermicro's superodoctorII to spit out some numbers for CPU temps but I am failing. It appears I need a module i2c-piix4 but it is not available in the kernel. Trusty old lm_sensors won't seem to work with this darn board. Any hints would be mucho appreciated. Rik

hi, i have new supermicro server (centos5, 2.6.30.9/2.6.27.34/2.6.18-distro kernels, wanpipe 3.5.6) card is: 1 . AFT-A101-SH : SLOT=4 : BUS=8 : IRQ=11 : CPU=A : PORT=1 : HWEC=32 : V=36 and i have this in log irq 17: nobody cared (try booting with the "irqpoll" option) Pid: 0, comm: swapper Not tainted 2.6.30.9rh #1 Call Trace: [<c0465b07>] __report_bad_irq+0x27/0x90

Hello, I am trying to install FreeBSD 9.2-RC4 on Supermicro server with Intel Xeon E3-1240 v3 processor. The processor has 4 cores with 8 threads. However only one core is detected (with two threads): FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 SMT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 The motherboard is Supermicro X10SLM-F. All

Hello, Digium support kindly proposed to ship a TE120P card to help resolve the issue. I plugged in the card, and introduced the loopback plug. I cleared the red alarm for a while and then i started seeing alarm switching from Yel/Recovering to Blue/Rec with a lot of IRQ Misses. I call Digium that assisted us, and we noticed IRQ sharing with the VGA adapter and the Ethernet port. I changed

I have a server with Super Micro X7DB3 motherboard and Adaptech AIC-9410 controller (http://www.supermicro.com/products/motherboard/Xeon1333/5000P/X7DB3.cfm). The hard disk is single SeaGate SAS disk (300Gb). I'd like to install CentOS 7 on the server, but unfortunately, the CentOS installer can't find any hard disk. I think the problem maybe caused by the disk controller. Can you please

We're having issues with the FXO/FXS ports on our Digium TDM cards sporadically. I'm wondering if anyone else has had these problems, or if anyone can provide guidance diagnosing or fixing the issue? The symptoms are that the FXO and FXS ports "stop working", usually after 2-4 weeks of server uptime. When this happens, sending a (SIP) call to an analog phone on an FXS port

I am planning to build a server based on the SuperMicro X7DBE+-O motherboard. This server will have two dual-core Xeon processors and a 3ware 9550SX raid card. Has anyone built a server based on this motherboard? Are there any issues with the smp/dual-core support in CentOS4 that might cause problems? I appreciate any input. I'm just looking to find out about any possible problems before

My workhorse server is a SuperMicro with their H8DM8-2 motherboard. For many years it ran CentOS 5.x and 6.x until the boot drive failed last year. I installed a 1TB SSD as /dev/sda and planned to install CentOS 7 on it, replacing CentOS 6.5 on the failed drive. Unfortunately every CentOS 7 media I tried, either optical disk or USB thumb drive, breaks down just a few seconds after selecting

Sorry for the long post but I know trying to decide on hardware often want to see details about what people are using. I have the following AS-2022G-URF machine running OpenGaryIndiana[1] that I am starting to use. I successfully transferred a deduped zpool with 1.x TB of files and 60 or so zfs filesystems using mbuffer from an old 134 system with 6 drives - it ran at about 50MB/s or

Tearing our hair out on this one. Trying to install CentOS 5 x86_64 on a Supermicro X7DVL-E with 2 Xeon L5320 quad core CPUs, 3Ware SATA RAID controller in a mirrored setup and 4 GB of memory. Installation crashes at random places while copying the files. We've run memtest86 for 24 hours without any errors, replaced the RAID controller, motherboard and disks, but still no luck.

Has anyone used this board as an Asterisk server? http://www.supermicro.com/products/motherboard/ATOM/ICH9/X7SPE.cfm?typ=H&IPMI=Y I'm mostly interested about the possible compatibility issues this board may have with the AEX800 card.

Hi list, I would like to buy this mobo: http://www.supermicro.com/products/motherboard/Xeon1333/5000V/X7DVA-E.cfm Is there someone that have it? Any issue with full virtualized mode? -- Alessandro R. _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users