similar to: Linphone / Kphone

Got no responses to this, but the list seemed to be down for a while, so here it is again. Sorry for the extra bandwidth! John Hi, I've been messing with getting SIP working for days now, with limited success. I've got Asterisk set up on a remote server with the echo test. Please try it out to verify I've got the server working right: sip:robot at nixon.butchwax.com

Today's "frustrated programmer" award goes to Linphone, which has the following debug output: > (linphone:28655): LinphoneCore-WARNING **: this fucking remote sip phone did not answered properly to my sdp offer! I get this message when I connect to linphone using a softphone, or when I try to use linphone to connect to asterisk and listen to an announcement. I suspect that

Hi, I've been messing with getting SIP working for days now, with limited success. I've got Asterisk set up on a remote server with the echo test. Please try it out to verify I've got the server working right: sip:robot@nixon.butchwax.com Running FC1, ThinkPad T22, headset thru the soundcard. Asterisk is asterisk-1.0_RC1. No NAT. The phones I've tried so far are as

All the clients that I'm aware of for IP telephony have drawbacks. Some won't work at all. KPHONE -- Kphone works best for me, but Kphone doesn't have a dialpad to dial tones during the middle of the call, so the demo that * comes with can't be run. Kphone (3.1, the latest) also has a habit of crashing if you do something even mildly stressful, such as hang up while Kphone is

Can anyone _recommend_ a downloadable OSS softphone that _works_ under Linux and is compatible with Asterisk. So far I have tried kphone and linphone and had problems with both, and I am still waiting to hear back from the X-Lite beta folks. -- Howard. LANNet Computing Associates; Your Linux people <http://www.lannetlinux.com> ------------------------------------------ "When you just

Hello all, I am in the process of converting our company over to * to replace our ancient executone system. As part of the testing process my boss wants us to all run softphones on our desktops until he gets the phones ordered. Quite a few of us run fedora core 2, and I haven't had any luck getting a soft phone to work. Kphone works the best out of all I have tried but I get no sound out of

Hi There, i think all VOIP clients for Linux are unusable! i got testet: Linphone + Linphonec all in version 12.2 Kphone gophone and other... the only programm that is usable is gnomemeeting... does anybody knew some other tools? Best Regards, Mark

Hi. I've just bought SIP telephony service from a Swedish telco. I've managed to make and receive calls with kphone. Now I want to set up asterisk to be able to add fancy features like voice mail and recording conversations. But first I have to get the basic setup right. I'm running asterisk and kphone on the same machine, behind at NAT-router. When I make a call (from my regular

Surely there has to be one soft phone that works under Linux. I've tried: kphone - it sometimes complains about the need to release the sound device linphone - sssssssslllllllllooooooooowwwwwww iaxcomm - needs some strange widgets various others - either only supplied as binaries, or just plain don't work, or won't compile. Is there just one out there that is guaranteed to work with

hello, I am running asterisk on one linux PC and want to talk through this server using Kphone installed on 2 different PC's. These are the extra lines added to sip.conf and extensions.conf respectively. sip.conf [jitha] type=friend host=dynamic secret=jitha context=sip dtmfmode=inband [sudhananda] type=friend host=dynamic secret=sudhananda context=sip extensions.conf [sip]

-------- Original Message -------- Subject: Re: [Asterisk-Users] Troubles with Kphone Date: Tue, 25 May 2004 15:44:15 +0530 From: Murali Krishnan <murali@bksys.co.in> Reply-To: ismk@myrealbox.com Organization: bk SYSTEMS (P) LTD., To: asterisk-users@lists.digium.com References: <200405250652.46370.klky3@fibertel.com.ar> enano wrote: >Hi , > > > >I'm triying to use

Hi , I'm triying to use kphone 4.02, but when i'm make a call the programs doesn't respond any command, so i can't hear any sound .. in sip.conf that's my codec config: disallow=all allow=gsm allow=ulaw allow=ilbc and the kphone give the follow : SipClient: Sending: 06:46:28.116 -------------------------------- ACK

Hi, We have set up our Asterisk server, our extension.conf and sip.conf according to http://www.onlamp.com/pub/a/onlamp/2003/07/03/asterisk.html?page=4 It's quite basic, and extension.conf is set up properly. The difficulty we are now encountering is in sip.conf, in trying to get any softphone to register at our own Asterisk server. We have searched the mailing list, and find bits and

I just can't get kphone to register with asterisk, i can make calls to the demos and even get into the mailbox but kphone cannot register. Here's my story. Can you help me?? Please I have installed asterisk on debian using apt-get install asterisk. I have configured an extension in extensions.conf as follows exten => 8003,1,Dial(Sip/8003,${RINGTIME},rt) exten =>

Hello, I know that my Kphone question may be a bit off topic, but I have been busy with this again and again for about one month now, sent three mails to kphone@wirlab.net (the contact address mentioned on http://www.wirlab.net/kphone/index.html), asked for a solution in a german ip phone forum and tryed many things by myself. I try to compile KPhone 4.0.3 (tryed CVS Version as well) but

Hi, I dial on A* from a linphonec to a Playback() extension, then suddenly the sound stops after a while, without any notice. I enabled debug both in linphone and A*, and the RTP packets are sent from A* and received from linphone. It doesn't matter whether I choose alaw, ulaw, gsm as codec (besides changing cpu load of course). How can I debug it? I'm using A* 1.6.2 and both linphone

Hi all. I have 2 ip phones (Grandstream Budgetone): -budgetone1 -budgetone2 All two are connected to an Asterisk server. When I make a call from budgetone1 to budgetone2, I can speak with budgetone2 whith no problem. But when budgetone2 hangs up, budgetone1 does not play any tone (like busy tone). Budgetone1 seems to be still in conversation, but what conversation! Has anyone had a problem

Where might I find an rpm for Centos?

Hi folks an issue I don't understand. I'm running * stable 1.0.3 on public internet, with following iax.conf / sip.conf entries: iax.conf [100] type=friend username=Foo context=default auth=md5,plaintext,rsa secret=secret host=dynamic callerid="Foo" <100> qualify=no sip.conf [10] type=friend username=Bar context=default callerid=Bar <10>

Hi John, 1. Could you get any further, in your quest for working BLF with linphone ? 2. Have you tried with a different Linphone version (4.12 is pending on Linux, packaged as an AppImage, or 4.11 exists on iOS/Android/Win10) ? Best regards Le mer. 25 mars 2020 à 15:06, John Hughes <john at calva.com> a écrit : > > On 23/03/2020 18:51, Joshua C. Colp wrote: > > On Mon, Mar