similar to: Snom 190's vs Softphone

Has anyone here used Asterisk inside a WatchGuard firewall, talking via the WatchGuard SIP Application Layer Gateway to an outside SIP service? I have a customer doing just that, and I am 100% convinced there is a bug in the ALG regarding the media port number it inserts into the SDP when it rewrites it. However, either they or WatchGuard will not accept there is a bug, despite my very detailed

We are trying to setup a sip connection behind a Watchguard Firebox 1000 and it is simply put...not working. The ports are all forwarded but the packets are not going out. It is as if the firewall simply ignores SIP packets. Has anyone seen this or have any idea what the issue could be? Watchguard so far has been of zero help. Kerry Garrison Director of Technical Services Tech Data Pros -

Has any had any experiences with Watchguard Firebox 1000 and Asterisk. I have asterisk on public side and phones on the private side. I am able to get the phones to register and make outbound calls but the inbound calls are intermittent. I have NAT enable in asterisk and on the Cisco 7960. Any insight would be appreciated. Thanks

Greetings, I have implemented the following command to allow CNAM to be delivered to my users. exten => 9969,1,Wait(1) This works great! However it has spawned a new problem. When this is implemented into a full dial plan. If a user is set to DND or sends a call to Voicemail by hitting deny the caller gets a busy. Below is a result of the calls. With the Wait(1) statement -- Executing

Hello, I am trying to use WINE (20050725-r1 on Gentoo Linux) to install/run Watchguard's Firebox Management Software (WFS). The WFS installer uses an installshield installer of course.. I've been looking thru the FAQ, wiki, etc and have found info about DCOM98 needing to be installed. I've tried a bunch of things so far, and here's where I stand: First, I tried getting

I am trying to install the WatchGuard VPN client that works on my WinXP system on to Ubuntu 7.04 Feisty Fawn. Here are the errors that happen half way thru the install. tfrench at tfrench-desktop:~$ winefile fixme:rpc:alloc_serverprotoseq protseq "mswmsg" not supported fixme:rpc:I_RpcServerStopListening (): stub fixme:rpc:I_RpcWindowProc (0x20054,00000002,00000000,00000000): stub

Good day to all-- First off let me say that I have been very pleased with the mailing list. I have learned a ton of stuff just reading other peoples questions and comments. I really enjoyed the VOIP Conference call on Friday morning. Still working on figuring out the best approach to custom voicemail emails (the reason I joined this group); however, we have more pressing issues. I

I am considering replacing my old checkpoint and watchguard firewalls witha single Linux box using iptables and shorewall. I have two ISP''s (with separate routing tables), two DMZ''s, at least one VPN to a remote office, and a local trusted network. The configuration will look like: +----------------+ | | net0 ----------+ eth1

I've got a number (10) Cisco 7960's connected to my network. All the phones work perfectly except one. The asterisk console keeps throwing up: Jun 22 15:39:15 NOTICE[-1147470928]: chan_sip.c:5887 sip_poke_noanswer: Peer '4001' is now UNREACHABLE! Jun 22 15:39:27 NOTICE[-1147470928]: chan_sip.c:4925 handle_response: Peer '4001' is now REACHABLE! Jun 22 15:42:08

Hi Timo/everyone, Currently we are logging the remote IP, but is there a way to show the IP address that the NAT connection is coming from? The reason I ask is, we are changing ISPs, and I would like to see in the logs when an external connection is coming from our OLD ISP connection, and when it is coming through our new one. We have a Watchguard firewall, and I have both External

Our setup: server running shorewal 4.5.2.2 and watchguard vpn appliance. VPN appliance was supplied by our document flow provider. I want to route traffic to 192.168.2.0/24 via 10.10.10.1 gateway. So I thought it would be a good idea to set it up as another ISP in the providers file. But when I enable it I can reach 192.168.2.0/24 subnet but not internet. Can you please tell what I am doing

hi folks. we recently deployed 10 Cisco 7960G w/ SIP firmware 7.3 on our network and we start having problems of dropping calls (actually the calls wasn't dropped it just the sound was muted for about 5-10 seconds, but most users will think the call dropped and hangup/redial). i've check the console output. there was a lot of messages like the following: Sep 28 15:00:49 NOTICE[8182]:

Hello, I am logging directly into file and also to syslog. Here is snippet from my /etc/asterisk/logger.conf: messages => notice,warning,error,verbose syslog.local0 => notice,warning,error,verbose But the logs look different: VERBOSE[7609][C-00000013] pbx.c: NOTICE[3042] chan_sip.c: Peer '1111' is now UNREACHABLE! vs. VERBOSE[7609][C-00000013]: pbx.c:2925 in

I want to use shorewall to setup my school network (because using the watchguard firewall has some problem), in school has one TrendMicro Interscan-VirusWall and one Linux server that inculde sendmail and apache service, the Interscan-VirusWall will receiving e-mail through watchguard firewall and then auto scan virus if no virus problem that will send to Linux sendmail service. Our

Maybe someone could point in the right direction. I have a small facility that's running around 40 Polycom 301/501 phones, Asterisk 1.4.18 running under Mandriva 2007.1. The phones were assigned a DHCP address in the 10.10.10.x range. Today, the DHCP server failed and to get them back online, I loaded the dhcp-server onto another system (Also running Mandriva) and copied the dhcpd.conf

Skipped content of type multipart/mixed-------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 252 bytes Desc: OpenPGP digital signature Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20040920/0629df7b/signature-0001.pgp

https://bugzilla.netfilter.org/show_bug.cgi?id=982 Bug ID: 982 Summary: vfork() in xtables.c can corrupt stack Product: iptables Version: 1.4.x Hardware: x86_64 OS: other Status: NEW Severity: normal Priority: P5 Component: iptables-restore Assignee: netfilter-buglog at

We have a Samba primary domain controller "empire", which seems to have DNS update issues. We can seem to query all records on empire just fine, and we can modify IPs for existing records, but it will not delete or add new records. Attempting to delete via the AD tools shows "Local security authority database contains an internal inconsistency". Adding a record on the command

I'm having trouble setting up tls/srtp secure communications on my Asterisk server- I'm still rather new at working with Asterisk. I have enabled tls and encryption and I have csipsimple with tls build on the phone. I'm currently only testing one phone with this capability so far, and the rest still work in the current state. My logging looks like this with verbose turned up:

Hi there, I am trying to setup a configuration that requires me to use SIP and asterisk behind a firewall and over a VPN to a remote office and with some local Phones also. I can't use IAX to my provider because they don't offer it and my handsets ( snom 300 ) also don't support IAX so it's all SIP. The configuration is a follows Asterisk PBX 10.202.17.217/24 ------>|