similar to: Polycom 300 -- "No compatible codecs!"

Hello, I have been having this problem for several releases of Asterisk. Whenever, I use iLBC or Speex codecs to make a SIP call, I get "No compatible codecs!" error, even though I am not disallowing anything in my sip.conf. One way I made it work is to hard-code these codecs in global_capability variable in chan-sip.c that seems to have fixed the problem. But I know it was

Original Post ---------------- I have an Asterisk related problem with mutualphone. I can connect to any number with any softphone that I am using (iaxcomm, SJPhone, and a few others). Also I have a Grandstream BT 101. But I cannot call (via Asterisk) to mutualphone destinations. Other destinations go fine. A working phone call (e.g. from iaxcomm) gives the following on the console: --

Hi, I have set up an asterisk with TLS and SRTP support. The SRTP is working with Phonerlite softphone. I have problem with the SRTP, when I make calls on Audiocodes gateway . I got the folloowing messages on asterisk: [Oct 2 10:59:48] NOTICE[24868]: sdp_crypto.c:232 sdp_crypto_process: Crypto life time unsupported: crypto:1 AES_CM_128_HMAC_SHA1_80

Hi folks, In an effort to save bandwidth (our 7905s run over a WAN) we've switched from ulaw to g729a. We purchased 4 licenses from Digium (4 SIP clients, low call volume), and they seem to have been accepted: [codec_g729a.so] => (Annex A/B (floating point) G.729/PCM16 Codec Translator) == G.729 Host-ID: 07:53:aa:d3:e2:f2:bd:cc:27:60:9d:5f:da:eb:5d:e9:6e:09:a1:4e == Found license

Ok, My provider is sending a call to me via ULaw but Asterisk isn't picking up on this, I've only allowed ulaw, I disallow=all and then allow=ulaw in my sip.conf and that's the only thing I allow, but when my provider sends me the requests, I get an error about No Compatible Codecs: 17 headers, 8 lines Using latest request as basis request Sending to 67.19.245.213 : 5060

Does anybody has got the some problem? The grandstream ATA 486 schould support almost all codecs, but it doesn't work. I get the following message when I force the use of different codec WARNING[9529]: chan_sip.c:2765 process_sdp: No compatible codecs! Feb 3 11:17:15 NOTICE[9529]: chan_sip.c:7395 handle_request: Unable to create/find channel What could I do to see some more detailed

Hi, I've upgraded my asterisk 1.4 to the version 1.8.11. After making some adjustments to the configuration files to port it to the new version, calls between registered phones in asterisk, work fine, but inbound calls coming from the SIP trunk I have with a telco to asterisk, don't work anymore. I don't know why!... This is the SDP portion that comes in the INVITE messages of calls

hi, all i want to use g729 codec for set up a call. so i donwloaded the so file from web site: http://asterisk.hosting.lv/#bin and install it properly. *CLI> *CLI> core show translation Translation times between formats (in microseconds) for one second of data Source Format (Rows) Destination Format (Columns) g723 gsm ulaw alaw g726aal2 adpcm slin

I'm using the Debian Sarge package of Asterisk - 1.0.7 + bristuff. When I call from a zap channel or a SIP phone to another SIP phone, then dial *8 from a third SIP phone, I get 503 Service Unavailable on the third phone and I get this at the Asterisk console: Jun 28 09:01:24 DEBUG[16774]: res_features.c:1709 ast_pickup_call: No call pickup possible... Jun 28 09:01:24 NOTICE[16774]:

List, I purchased 2 g729 licenses but I can't get it to answer a g729 call from a cisco router with a vwic card. In the debug output below you will see that asterisk thinks it only supports: (gsm|ulaw|alaw|h263) when it should support g729 according to the config also listed below. The real odd thing is I can place g729 calls to the router, just not from the router to *. Anyone have any

Hello, I'm wondering if anyone has benn able to successfully get g726-16 passthrouhg to work? I am wanting to use this codec instead of g729 as I'm running out of DSPs using a high complexity codec on the Ciscos. I would think it would work just as g729 does, which has been working fine for me, but it does not. G726-32 does work great however, but it's like Asterisk doesn't

hi, is there someone with working asterisk13+chan_sip+SIP.js/sipml5 ? or is chan_pjsip better supported? or the recommended way for asterisk is use respoke.io? my problem with asterisk13+chan_sip+sipml5(the same problem is with SIP.js) chan_sip.c:10496 process_sdp: Can't provide secure audio requested in SDP offer " sip.conf (important parts) [vr1a882] ... nat=force_rport,comedia

Hi All, I have a weird problem. I have asterisk setup using the G729 Codec to receive Incoming calls both from a SIP Gateway (SER and Quintum) and via ISDN using i4l and have rules setup in extensions.conf for sending calls out either back via the SIP Gateway or ISDN. What I want to do is have PSTN calls come in via the SIP Gateway, be answered by the auto-attendant and then sent back out to

Dear Folks, I'm running Asterisk 1.4.31 server, on an Ubuntu 9.10 system. My scenario is simple: connection to the PSTN directly via SIP, using g729 codec, and connection to the softphones (X-lite 3.0 build 56125) trought local network, using ulaw codec. Sometimes, I got messages like: [Jul 1 15:26:16] WARNING[26483]: chan_sip.c:5514 process_sdp: Unsupported SDP media type in offer: image

Hello, I have problem to make SIP calls, i have asterisk + PC InterP4 + Digium TDM400P here is the content of the sip.conf: [SIP_PROVIDER] type=peer fromuser=testcomclient username=testcomclient secret=testr host=IP_SIP_PROVIDER ;dtmfmode=rfc2833 context=interne canreinvite=no ;allerid=Beer disallow=all allow=ulaw allow=gsm allow=g723.1 ; Asterisk only

A previous poster mentioned the same thing, with no response: http://lists.digium.com/pipermail/asterisk-users/2004- December/080161.html Fresh asterisk 1.0.5 install on FC3, started with "make samples", nothing fancy. It's so bland, I'm surprised the list isn't full of people having the same trouble. I have several Uniden UIP200 phones and a single Grandstream BudgetTone

Hi - I've recently bought a mediatrix 1204 and have had a complete nightmare getting it up and running with an asterisk@home setup. I know this isn't a mediatrix list but I'm at my wits end and the support with this product is atrocious. (mine was even shipped with firmware that was incompatible with the win32 software it came with so I wasted a day trying to work out why the SNMP

Hi all, I am struggling to make my asterisk server work. The problem is I can not place a call from a phone outside, but I can call out from a phone in the local network where the asterisk server sits. I turn the debug on, and the log are shown below. I can see "REGISTER" method is OK. ( SIP/2.0 200 OK) But Later, in the "INVITE" method, the SIP addresses become

I have recently started experimenting with Asterisk. I am running the system the other side of the a NAT router and trying to connect to FWD. I have opened UDP ports and have configured sip.conf to handle NAT. The problem: I can call from the FWD phone and the extension on Asterisk rings and there is two way sound so no problem. Now if in the extension.conf file I have, exten =>

Hi All, I'm trying to upgrade asterisk server to 1.8.x from my asterisk 1.6, But when making A Call from SIP Client, I got cli Warning ... and no call has been made. My Sip Client is using lib java peers client http://peers.sourceforge.net/ with standard codec PCMU/PCMA [Jan 28 23:03:32] WARNING[1654]: chan_sip.c:8942 process_sdp: Unsupported SDP media type in offer: audio 0 RTP/AVP 0 8