similar to: Transfers to engaged extensions

Hi, Just thought I'd mention that I spent a while battling with tinc today. I had quite a weird behaviour - in routing mode, tinc would come up fine on both hosts, but pinging hosta from hostb wouldn't work until hosta pinged hostb. I've used an earlier version of tinc before in a different environment with no problems, and vaguely remembered a more complicated tinc-up script, so I

Hi, Has anyone out there managed to do a hookflash transfer with a Micronet 5050s gateway ? We have just tried out this gateway and it seems to do everything we need except this particular feature. Also if you have succeeded where is the hookflash time specified in the gateway. There does not appear to be any parameter for this. Perhaps it is not supported at all. Any help appreciated.

List, Having a little trouble with the following. Let me prefix by saying I have blind transfers working from the following setup. Inbound call [from-zap] (SIP/sv0071iv) answers. Zaptel -> Asterisk -> SIP extension SIP extension then blind transfers [from-sip] --- SIP extension -> Asterisk -> Zaptel During this whole process, the original channel off the trunk (lineside T1) is

I am slowly getting up to speed with asterisk. This is a very basic problem but I would appreciate any help. I am using a small network of clients and an asterisk server. Each client has a headset to communicate. Is there a simple way of playing an engaged tone when a line is busy? Regards ******************************************************************** This email and any attachments are

Hi I've got an 8 port Junghanns ISDN BRI card with 4 ISDN lines connected to it; all 8 channels are configured in my zaptel.conf. I am having a problem where intermittently, but very often, the ISDN line is engaged when the user tries to make a call. It almost seems like the previous calls are not being disconnected once the user hangs up. I no there is a priresetinterval setting in the

I need attended transfers, but I do not have time to talk to another extension and see if they accept the transfer, my features.conf is: [general] parkext => 700 ; What ext. to dial to park parkpos => 701-720 ; What extensions to park calls on context => parkedcalls ; Which context parked calls are in parkingtime => 220 ; Number of

I think I've managed to figure out that there are two ways to transfer a Zap call, using hookflash (defined in zapata.conf) or the # key (the t and T options of the Dial command in the dialplan), but not why there are two ways to do this, nor what the difference is between them. Is there something that explains this? thanks -------------- next part -------------- An HTML attachment

I repost a message I put a week ago: I have a Cisco IAD 2431 which has MGCP protocol; I cannot make it to work againts Asterisk; at least there is some MGCP conversation between them but when I offhook a phone attached to IAD I get no tone at all. As anybody managed to get working Asterisk against an MGCP Cisco gateway ? Which MGCP version should I use ? Also I recently

Here is a question that needs a few opinions... Recently we installed a couple of FXS gateways into a site with a SIP Proxy/Softswitch other than Asterisk. One of the things that the users on this site need to do is receive calls on single line phones on the FXS gateways and then hookflash and transfer them to other SIP users. We found that the FXS units, true to their nature as VoIP gateways,

Hi all, I am either going daft or not reading things right. I have just installed, (well 10 hours ago) a TDM40B and 3 X100P cards. I have followed the examples for the conf files to the letter. I can call the pots extensions OK from IAX clients, SIP clients and from the incoming X100P cards. But, if I pick up the handset to make a call all I get is the engaged tone and the following message.

Don't know what else to call this. Googling and some time on the IRC channel haven't gotten me anywhere. Here's the sitch, which is a bit complicated but is something my customers are in fact encountering on an everyday basis: 1. Bob is on a Zap channel talking through the PSTN to Carol. Both have the misfortune, like so many of us, of having LECs who do not offer disconnect

I've got a piece of CPE equipment that has an FXS port that I have tied to an FXO port on a TDM400 clone card. Normally, if I go off-hook with a standard telephone connected to it, I get a dialtone. If I dial a digit, and send a hookflash, the device will provide a dialtone back for the next available channel on the device. I'm trying to recreate this same behavior with Asterisk,

I'm sure dumb when it comes to describing things that happen on my system. I'm making an outbound call on my ATA186 when another call comes in. I first get the nasty CID screech and then the periodic call-waiting tone. So far, so good. Then I hookflash, and just like it's supposed to, the waiting caller is on the line. But during the duration of that conversation, my console

Greetings All- I have an * box with the NuFone H.323 channel driver installed. I also have an Altigen VoIP system with a PRI to the PSTN. I can sucessfully make a call from a SIP extension (snom190) to an H.323 extension (altigen phone) The thing I can't seem to make work is a call from a H.323 phone to a SIP extension. Here's the layout:

I wonder if I'm the only one whose customers are having trouble with hookflash on their TDMXXX cards. The problematic situation of record for us is a user who is on a call, and then wants to do one of two things: Hang up that call and take another one coming in Hang up that call and make another new call What happens is that instead of seeing the event as a hangup, asterisk perceives

Is there an easy way to disable flash transfers? I'd prefer the users hit # to transfer, since some users are hanging up a call, then dialing another one without giving the handset enough time to actually hangup the call, so it appears that they are transfering the 'ended' call to the new number that they are calling.. I'd like to keep flash functionality for call waiting, but

I have got extreme problems with getting any incoming calls to ring extensions, the sip debug info shows the CLI of the call coming in, but the extensions do not ring, and the caller receives either a engaged tone or the line is unobtainable depending on which provider is using. I have used dozens of sample files to test, and I know I am doing it right (aren't I?? :p) could one of you fine

Hello, I've been trying to send traffic to a Cisco Call Manager 3.2, but with no luck. Here's whats happening: * Call gets to CCM * Call gets to the gateway * Rings a couple times on destiny * Call gets hungup. On the CCM I get the following error: MediaManager - ERROR wait_AuConnectErrorInd On the Gw (Cisco AS5300) I get a disconnect cause of 2F (Resource not available) On asterisk:

Hi all, I'm using following software and equipment and I have very strange behavior: Asterisk CVS-NHEAD-05/30/05-16:42:41 H323 gatekeeper - GnuGK 2.2.2 IAX2 client - Firefly 1.9.8 build 3945 H323 client - SJPhone Build 1.50.271d H323 gateway - Welltech Wellgate 3504A When I dial from Firefly (IAX2) -> SJPhone (H323) everything works as expected. When I dial from SJPhone (H323) ->

Hi, My configuration is SipPhone<-->*1<--->*2. My asterisk version is 1.4beta3. I installed pwlib,openh323,chan_h323. When i call from SipPhone--(SIP)-->asterisk1---(H323)-->asterisk2, there is no audio. Using 'rtp debug', I can see that rtp packets are being received. Rtp packets are being exchanged. I also tested chan_ooh323, but to fail. Can anyone recommand best