similar to: high-quality, high-bandwidth codecs?

hi all I spoke to this guy the other day, working with Cisco's VoIP system. He told me they were using a PRI/E1 to transport SMS, and could even do so from their phones. May this be possible with asterisk? I have an E100P in my primary asterisk server connected to a E1/PRI. roy

hi i'm setting up a rig to handle quite a few SIP clients, so i need a way to simulate, say, 20k SIP ATAs. Does anyone know how? This should of course be as close as possible to 'reality', meaning n% calls per client and the usual REGISTER/OPTION traffic. thanks Best regards Roy Sigurd Karlsbakk roy@karlsbakk.net --- In space, loud sounds, like explosions, are even louder

hi using the following in sip.conf, codec preferences aren't set, and asterisk uses alaw whatever I do, except force it to one specific in the [user] [general] disallow=all allow=g726 allow=g729 allow=gsm allow=alaw then, from 'sip show peer something' it tells me Codecs : 0x11a (gsm|alaw|g726|g729) Codec Order : (none) can someone please explaing why? this is

Howdy All, I''ve a bit of a strange problem here. I have a filesystem with one snapshot that simply refuses to be destroyed. The snapshots just prior to it and just after it were destroyed without problem. While running the zfs destroy command on this particular snapshot, the server becomes more-or-less hung. It''s pingable but will not open a new shell (local or via ssh) however

Hi all I''m seeing some rather bad resilver times for a pool of WD Green drives (I know, bad drives, but leave that). Does resilver go through the whole pool or just the VDEV in question? -- Vennlige hilsener / Best regards roy -- Roy Sigurd Karlsbakk (+47) 97542685 roy at karlsbakk.net http://blogg.karlsbakk.net/ -- I all pedagogikk er det essensielt at pensum presenteres

hi all it seems like whatever I do, I can't use more than 1 BRI on my AVM C2 with chan_capi. Both channels seem to work, but not at the same time. And - yes - they're connected to different NT boxes :) Any ideas? kapejod? -- Roy Sigurd Karlsbakk, Datavaktmester ProntoTV AS - http://www.pronto.tv/ Tel: +47 9801 3356 Computers are like air conditioners. They stop working when you open

hi all according to what I've found out this far, the G.729 patent seems not valid in a broad range of countries. so... does anyone know where I can find the algorithm? roy

Hi, Is there a simple way of rolling back to a specific TXG of a volume to recover from such a situation? Many thanks, Przem -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://mail.opensolaris.org/pipermail/zfs-discuss/attachments/20110627/9b1c5a85/attachment.html>

hi We have a box here connected to an antenna receiving rather large amounts of metheorological data from a satellite. the data is received and ransferred to another box and removed from the receiving server. I first thought of using rsync for this, but it seems --remove-source- files has no way of checking if the file is open or not, so if the receiving process is still writing to a

hi all I'm trying to setup a dlink dph-100h phone (actually a dph-100m but with the h.323 software) with asterisk and chan_h323. AFACS, the dph-100h software can only be configured to point to a gatekeeper. I know I don't need to do this, but it's a test before I setup my Symbol Netvision phones (I don't have an access point for them now). First, this is what I have, and what

Hi I''m running OpenSolaris 148 on a few boxes, and newer boxes are getting installed as we speak. What would you suggest for a good SLOG device? It seems some new PCI-E-based ones are hitting the market, but will those require special drivers? Cost is obviously alsoo an issue here.... Vennlige hilsener / Best regards roy -- Roy Sigurd Karlsbakk (+47) 97542685 roy at karlsbakk.net

hi all I just setup a new site, perhaps soon a wiki, to collect what's out there of useful backports from Trunk/1.4 beta back to 1.2. Take a look at http://http://www.asterisk-backports.org/ and judge for yourself ;) roy -- Roy Sigurd Karlsbakk roy@karlsbakk.net (+47) 98013356 --- In space, loud sounds, like explosions, are even louder because there is no air to get in the way.

Hi all Has anyone done any testing with dedup with OI? On opensolaris there is a nifty "feature" that allows the system to hang for hours or days if attempting to delete a dataset on a deduped pool. This is said to be fixed, but I haven''t seen that myself, so I''m just wondering... I''ll get a 10TB test box released for testing OI in a few weeks, but before

Hi all Trying to setup dovecot with mysql and postfix, I have configured it as given below. thecot user has the dovecot group as primary, and is also a member of mail and dovecot-users. Still, it can't setgid to dovecot-users. I tried changing the shell for the dovecot user to something useful and chmod'ing a file to dovecot-users, and it work well. Still, no mail comes through

hi does anyone know how I can reset an SPA 2000? When trying ****73738# it just keeps prompting me for a password :( roy

Hi all I have installed a new server with 77 2TB drives in 11 7-drive RAIDz2 VDEVs, all on WD Black drives. Now, it seems two of these drives were bad, one of them had a bunch of errors, the other was very slow. After zfs offlining these and then zfs replacing them with online spares, resilver ended and I thought it''d be ok. Appearently not. Albeit the resilver succeeds, the pool status

Hi all We have a 100kVA GE LP Series UPS. I can't find this series in the HCL, but other GE UPSes are listed. Would it be possible to somehow use NUT with this UPS? -- Vennlige hilsener / Best regards roy -- Roy Sigurd Karlsbakk (+47) 98013356 roy at karlsbakk.net http://blogg.karlsbakk.net/ GPG Public key: http://karlsbakk.net/roysigurdkarlsbakk.pubkey.txt -- I all pedagogikk er det

I have a 1.5TB disk that has several partitions. One of them is 900GB. Now I can only see 300GB. Where is the rest? Is there a command I can do to reach the rest of the data? Will scrub help? -- This message posted from opensolaris.org

The x86 and x86_64 Digium G.729 codec binaries have been updated for use with the Asterisk 1.4 beta (which should also work on current svn trunk). Anybody that is using the older modules with the 1.4 beta (or svn trunk newer than several days ago) is strongly encouraged to upgrade immediately, to avoid potential issues. -- Jason Parker Digium

The x86 and x86_64 Digium G.729 codec binaries have been updated for use with the Asterisk 1.4 beta (which should also work on current svn trunk). Anybody that is using the older modules with the 1.4 beta (or svn trunk newer than several days ago) is strongly encouraged to upgrade immediately, to avoid potential issues. -- Jason Parker Digium