similar to: Broadvoice issues

Hey guys. Thanks for the help on the Pattern matching, I got that working pretty nicely. the next problem I have is that I'm using an include file, but its not really working... In my extensions.conf: [incoming] exten => _NXXNXXXXXX,1,SetCallerID("Unknown Called Number") #include "numbers.conf" exten => _NXXNXXXXXX,3,Macro(Number,1000,${EXTEN}) [macro-Brand]

Hey guys... one last thing. I have set up agents in my Asterisk... and one agent refuses to log out. I have tried to log out from Xlite. I have tried from the console... AGENT LOGOFF 1001. It still gets the call. If I shut down Xlite, it still tries to contact agent 1001, but gets a congested message... if I bring Xlite back up, it gets the call. If I kill Asterisk and restart... its _STILL_

Hello guys. I am a fairly new user to Asterisk, and I'm just having a tough time. My goal is to set up a VOIP PBX. I have signed up with a BroadVoice number, and I have three systems with SIP phones. The PBX and the SIP phones are all behind a Cisco PIX running NAT. I am using Asterisk CVS version from yesterday. I also tried 1.0.3 with little luck. The SIP phones are two X-Lites on

Hi all i'm just starting to setup my "own" asterisk. My first question is, if there is any reason to choose a special linux distribution or if it doesn't mater which distribution i chosse. Is there anything i should be aware of? Thanks a lot for your help! Greetings Frank -------------- next part -------------- An HTML attachment was scrubbed... URL:

So it was all working well and then suddenly I'm unable to get incoming calls from BV. Outgoing is fine. I'm using AAH. I have the following settings; register=9738281625@sip.broadvoice.com:PASSWORD-GOES-HERE:9738281625@sip.broadvoice.com/2208 [broadvoice] username=9738281625 user=phone type=peer secret=PASSWORD-GOES-HERE qualify=1000 port=5060 nat=yes insecure=very

I finally got my incoming and outgoing to work on Broadvoice with a configuration file that is no where close to the one given by them. Here it Is (sip.conf). For others who have a working config could u please share so that I could compare. Thank You [broadvoice] type=friend username=[number] fromuser=[number] secret=[password] host=sip.broadvoice.com fromdomain=sip.broadvoice.com

I'd be grateful if someone could point me in the right direction. I have a Broadvoice trunk attached to Asterisk which I use for frequent calls to the UK using the following in extensions.conf exten => _0[1-68].,1,Ringing exten => _0[1-68].,2,Dial(SIP/BV/01144${EXTEN:1}) exten => _0[1-68].,3,Hangup The caller hears immediate ringing, though it seems that Broadvoice

Let me start by stating that I've been thinking about setting up an unofficial broadvoice-users mailing list for a while. I've asked Broadvoice techs about it a couple times by phone and email and it looks like they haven't passed it up to the people who would make that decision or said people aren't interested in creating/maintaining one. If there's enough interest (read 10

Hello All, I have one X100P card for inbound calls. I use two Broadvoice SIP accounts for all my outbound calls. I'm unable to place calls using BV. Inbound BV calls are ok. Verbosity is at least 3 -- Executing Macro("SIP/201-365c", "dialout-default|XXXXXXX") in new stack -- Executing GotoIf("SIP/201-365c", "1?4") in new stack -- Goto

I can call my Broadvoice DID from a outbound caller-id blocked phone, and BV happily delivers the CID to Asterisk (and then on to my IP phone display.) I've tested with the *67 prefix from a PSTN phone to make sure it was supposed to be blocked. The number is always correct, but sometimes the the caller ID name is set to something funky (like a CO or switch center name.) I *think* this

HELP! Ok, so I have the following SIP.CONF: [general] context=default port=5060 bindaddr=10.1.1.200 externip = XX.XXX.XX.XX localnet=10.0.0.0/255.0.0.0 disallow=all allow=ulaw allow=g729 allow=g726 allow=alaw register => ##########@sip.broadvoice.com:XXXXXXXXX:##########@sip.broadvoice.com/1234 [sip.broadvoice.com] type=peer host=sip.broadvoice.com fromdomain=sip.broadvoice.com

--------------- Hi, I got hit with a funny one today; my configuration, which had been running fine for many weeks, suddenly stopped registering with Broadvoice's SIP. I switched among BV SIP hosts, verified my account was OK, even tried upgrading Asterisk. The weird thing was that I could associate OK with my WiFi SIP phone. So it looked like an Asterisk- specific SIP interoperability

Hi, We've been using Broadvoice with * for several months, mostly successfully. However, sometime last weekend (Sat, Dec 4 - Mon, Dec 6), BV seems to have stopped passing DTMF on incoming calls. We've not made any changes to the * system during this time. We even switched to using their DC server instead of the usual LA server, with no effect on the problem. We have applied the

I did a quick google search of the lists site and couldn't find a definitive answer, so if it's there, I apologize for asking again. Starting about noon yesterday, I am no longer able to send/receive calls via Broadvoice. When calling in, I get a fast busy, and when calling out I get the following error: -- Executing Dial("SIP/112-572a",

Hi, all. The asterisk setup is working fine, receiving calls via broadvoice "initially". ? When call comes in via broadvoice number, asterisk picks it up and routes correctly, as long as the call came in within ~2 min from the previous one. In other words, as long as a call comes in within ~2 min since the previous one, asterisk will answer the call. However, if the call comes in

I have been going crazy with this also since Sat. Our server was working perfectly with BV but will now not place calls to BV. Incoming from BV works fine. I felt sad rebooting it today, it had been running for almost 200 days! Here is my error message from the console... Notice I am running today's CVS Connected to Asterisk CVS-03/08/05-14:32:39 currently running on com (pid = 1624)

Is anyone else experiencing 404 errors on outbound dial with Broadvoice? I've followed the instructions posted by Broadvoice to configure sip.conf, and inbound calling works fine. Every time I try to dial out, I get a 404 "Not Found" error. Here are the relevant sections from my configs. sip.conf: context=broadvoice-in register =>

Hello All, I'm just getting into *, and trying to use a Broadvoice account. It works inbound, but Outbound fails no matter what sip.conf parameters I try. From the recent posts here I think it could be: A bad CVS release - I will try to download and build from a new one Broadvoice not challenging and/or Asterisk not responding with an Authorization: in the INVITE header. I am

Is it possible to build grousp of channels? I have a series of extensions which are receiving incoming calls to various virtual organizations. Something like this... [foo-incoming] exten => 2122222222, 1, Goto(ACorp|1000|1) exten => 2123333333, 1, Goto(BCorp|1000|1) . . . exten => _NXXNXXXXXX, 1, Goto(GenericCorp|1000|1) [GenericCorp] exten => 1000, 1, SetCallerID("Generic

I have configured asterisk with the AMP php configuration utility. I am able to make outgoing calls through broadvoice but incoming calls are sent to BV's Voicemail and never actually enter the IVR. When I show sip debug info through the asterisk prompt it actually reads the incoming call from BV but then issues a busy signal sending the call to BV's voicemail. I also modified