similar to: Which version of asterisk-oh323 should i use with asterisk v1-0-5.

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi All, I've just finished my upgrade to asterisk RC2. I need to have H323 support, and in the last months i've been using the chan-oh323 with good results. My question is: anyone in the list have made tests with both chans (oh323 and h323), which is best ? For this installation i don't need the gatekeeper support, i just want to

Hello, I just tried to compile OH323 0.6.3b on a RH9 machine with Asterisk 1.0 RC2 installed but failed. I applied the patch to the required OpenH323 library according to the instructions, and set the proper directories in the Makefile. Here is what I receive after I issue make: ******************************* g++ -DP_USE_PRAGMA -fno-rtti -ffunction-sections -fdata-sections -D_REENTRANT -

Can I install the following oH323 software on Asterisk@home: Version 0.7.3 (latest, Asterisk HEAD/v1-2 compatible, date spec 2005-09-08) Version 0.6.7 (latest, Asterisk v1-0 compatible, date spec 2005-09-08) If so, which of the above do I install and what is the difference between the two. Do I also need to install openh323-Mimas_patch2-src-tar.gz and pwlib-Mimas_patch2-src-tar.gz on

Hi, i have been using asterisk CVS 19/07/2005 and asterisk-oh323-0.7.2. I now want to use oh323 with Asterisk 1.2.4+. Can anyone tell me what versions of oh323(and pwlib and oh323) they got to work with Asterisk 1.2.4+. -- thanks, yusuf

Hello List, I'm trying to setup MGCP channel with a Centile Media Hub box. My Centile box has 4 ports and I got no dial tone. Can somebody help with this isuue? This is my mgcp.conf and extensions.conf Thanks Daniel. ; MGCP Configuration for Asterisk ; [general] port = 2427 bindaddr = 192.168.11.20 disallow=all allow=g729 allow=alaw allow=ulaw [192.168.11.200] context=MGCP

Hello all, This new version of asterisk-oh323 has some bug fixes (in configuration file parsing), changes in configuration file parameters (an attempt to make it more readable!) an some minor improvements like in-band DTMF detection (based on code posted by Klaus-Peter Junghanns on this list) and better handling of RTP packets with multiple voice frames. The code is available from the usual

Hello all, A newer version of asterisk-oh323 is available. This version features a set of channel variables and improvements in audio frame handling. People that have reported clicks or choppy sound, in some cases, should try this version. Download from: http://www.inaccessnetworks.com/projects/asterisk-oh323 Regards, Michael.

Hi all, I got serious problem here, I hope I ask on the right place here (sorry if I am wrong). I have used asterisk 1.2.17 with openh323 ver. 0.7.3, for integrating between SIP Gateway and H323 Gateway, it runs about 6 months. But, recently I think it doesn't work anymore...I can't call from SIP Gateway to H323 Gateway. I try to debug oh323 by using : # oh323 debug toggle But I got no

Hello all, This new version (0.6.1) of asterisk-oh323 fixes the "one-way audio" problem of the previous release. Download from the usual location: http://www.inaccessnetworks.com/projects/asterisk-oh323 Regards, Michael.

>Please I have combed the Archive to no avail on this problem protocol >control problem in oh323. >I'm receiving calls from CISCO AS5300 -> Asterisk -> Zap Channel. The >calls clears the remote location but drops on my own end. Please what >could be >wrong. I have included the oh323.conf and log files. I have tried >various configuration and I thought I should

Hello all, This new version has more options (account code, AMA flags, lib tracing) in the config file and some improvements in the build process. The code is available from the usual location: http://www.inaccessnetworks.com/projects/asterisk-oh323 Regards, Michael Manousos

According to the wiki at voip-info.org, the dial structure for using oh323 without a gatekeeper is: OH323/<exten>@<host>:<port> or OH323/<exten> The second option is valid only in the case where a gatekeeper is used. NOTE: OpenH323 library v1.12.0 has a bug in the parsing of the destination host. When this version is used then the above syntax should be:

I have InAccess Networks' oh323 installed and partially working. I can call the h.323 phone from asterisk using Dial(oh323/${IP_ADDRESS}). How do I dial from the phone to an asterisk extension? It does not appear to me that the phone actually registers (or attempts to register) with asterisk. I'm using Asterisk Stable and the phone in question is a polycom Soundstation IP 3000 or

Hi, erverybody The Asterisk is running well in the linux system. Now I would like to add oh323 in Asterisk. I have download pwlib(version is 1.6.6) and openh323(version is 1.13.5). And I sucessfully maked and installed these two packages. But I got the following errors when compling the asterisk-oh323 0.6.3a: for x in wrapper asterisk-driver; do make -C $x all || exit 1 ; done make[1]:

Hello everybody, I have a strange comportment with oh323 and asterisk, I'start testing asterisk but with this I can't understant plesae help me ! Thanks Eltorio ---------------------------------------------------------- 1/PB: I can't dial from a H323 extensions (registered on a GNU GK) to a Modem[i4l] line ---------------------------------------------------------- Nothing happens

Michael, Thanks a bunch, I downloaded from inaccessnetworks.com thinking that it is the latest :). Ok I will upgrade it. just for the record, following worked. exten => _87.,1,Dial(OH323/H323:${EXTEN:1}@16.52.153.206) Cheers Sathya Date: Fri, 28 Nov 2003 11:28:59 +0200 From: Michael Manousos <manousos@inaccessnetworks.com> Organization: inAccess Networks To:

Hi guys, I've been trying to update my chan_oh323 from 6.1 to 6.3b. I built asterisk from cvs-head on the date Micheal said he made it compatible, pwlib-1.6.6 and openh323-1.13.5 (both with nothing more than the ./configure, make, well aplied patch on openh323) When I start * with my normal config I get this: [chan_oh323.so] => (OpenH323 Channel Driver) == Parsing

Followed instructions from these old post, CVS updated my asterisk too, edites makefile... but ---------------------------------------------------------- Get oh323 from http://www.inaccessnetworks.com/projects/asterisk-oh323/Libraries/ openh323-Janus_patch4-src-tar.gz Get pwlib from http://www.inaccessnetworks.com/projects/asterisk-oh323/Libraries/ pwlib-Janus_patch4-src-tar.gz Get

Joao, Thanks for sending the Installation tips as pasted below. It works. Seshu ---------- Get oh323 from http://www.inaccessnetworks.com/projects/asterisk-oh323/Libraries/openh323-Janus_patch4-src-tar.gz Get pwlib from http://www.inaccessnetworks.com/projects/asterisk-oh323/Libraries/pwlib-Janus_patch4-src-tar.gz Get asterisk-oh323 from

Thanks Vamsi I have not been able to locate pwlib - 1.6.6 or openh323 1_13_5. I found the latest versions through sourceforge and I found some older versions on another site, but not these versions. This has been quite frustrating. Anyway, I think by using the asterisk-oh323 branch under channels in the asterisk source tree I will have more luck. At present it seems to compile successfully, but