similar to: echo's + cheap phones

Hi all, I used to have an OpenLine4 card, but decided against using it due to some problems with hangup detect. Does anyone on the list actively use Voicetronix's OpenSwitch12? What are your opinions on the card? Cheers, Flynn

Hi all, I hope someone can help, as I have an urgent problem. I've got a production Asterisk server thats been deployed, but we are seeing a strange voice echo problem. There is about a 250ms echo for the users in the office, and they are hearing their own voice back at them. I'm running the CVS Head code, on RH9.0. This is on a P4 box with 2gb of memory. The client SIP phones are

Hi All, Just a quick question, but I could really use some help on this one. I've got the CVS-Head of * installed and running, and am using a VoiceTronix OpenSwitch12 to connect to 12 analouge lines. I've got callerid activated by the Telco, and can get callerid using a std phone. However, using *, I always get an error 'Cannot decode callerid'. Does anyone know if I need to

>From what i've read i think that asterisk is suppose to generate the dialtone. But when i pickup my analog phone it seems that the Openswitch12 card is the one playng the dialtone. Im almost positive the card is playing the dialtone, can anyone confirm this? And if so how can i change the dialtone?

Hello all, I hope this is not off-topic, if it is please let me know. I'm currently playing with an Asterisk at home, in order to get to know it's ins and outs. Very very impressive indeed. I've got it hooked up to my home phone line via a Wildcard clone board (Intel modem with Ambient chipset), and it works like a charm. Zaptel picks up the card as a generic clone, and works with it

Hello, Hacker I install VoiceTronix OpenSwitch 12 port PCI Telephone Card, and setting vpb.conf, extensions.conf following My problem is: When i dial to fxo(channel 9-12), it is ok, but when i continue press exten 102, the channel crach with error messages following exception caught: VPBAPI_DIAL_INVALID_LEVEL, file: vpbdial.cpp line:872 Do i ignore some setting for VoiceTronix OpenSwitch12

Has anyone gotten the voicetronix boards to work with Asterisk, what would it take? Or does anyone know where I can get 4 ports or more fxs PCI cards that do work with asterisk? Brian J. Schrock Network Engineer, RHCE, CCNA Anistone Technologies Phone: 614-798-9106 FAX: 614-573-7165 6926 Avery Rd. Dublin, OH 43017

Hi, Firstly it appears you are not passing the extension to be dialed to the Dial command, so the driver is dialing badly. It should be something like dial(vpb/1-2/102) since this is a line port. Admittedly the driver needs to check better that the number it is trying to dial is legit but it doesn't :) P. --- You Wrote --- From: "Jacky" <jacky.taiwan@msa.hinet.net>

Does anyone have X-Lite build 1059 working fully with Asterisk? The GSM Codec works very well now but we have problems when using G711 in that when I setup a ping between the two sites and then watch the latency, it steadily increases and starts at about 150ms and goes up to 2500ms within about 20 seconds. I have not investigated fully but I guess that its sending ever increasing size packets.

If there is a power failure, which cards other than x100p and voicetronix openswitch provide "redundancy".

dear Hackers, i have a voicetronix Openswitch card, and i have been finding it very dificult to get it to work with asterisk. i intend to connect 8 ports to the PSTN and 4 as station ports. problem 1: On running asterisk all i get at first i get : event[9=>[11] station OFF hook] on vpb/1-12 even [12=>[11] loop drop on vpb/1-12 event [12=>[11] Tone detect:GRUNT event [2=>[11] Dial

I'm working on putting together some Ideas about using Asterisk in our environment, one of the things I want to consider is DID trunks (analog), what hardware do I need to terminate these trunks? I'm looking at the voicetronix openswitch6 or openswitch12. On the openswitch, I'd like to use some of the lines for analog sets for the breakroom, kitchen, etc where they don't need all

I'm using a Voicetronix OpenSwitch12 with Asterisk. I need the ability to hook-flash a channel while a caller is on the line so I can transfer a call through a PBX. I need the equivalent of the FLASH() application, which only works with Zap channels. Does anyone know how I can hook-flash then send DTMF on a vpb channel? Rodney Hassell -------------- next part -------------- An HTML

One of the suggestions I got for dealing with my analog FXO woes was to look into using a Voicetronix card instead of the Digium. They're more expensive but if it worked better it may be reasonable. They indicated they were compatable with the CVS HEAD version of *. Can someone share with me their experiences with Voicetronix OpenLine and/or OpenSwitch cards with *? I'm specifically

Hi all, I have just received the following e-mail from an Asterisk user: "I just made a call via BT to a mobile. Then an incoming call came in and Ann else answered it - it made my call go completely fuzzy and I could hear what the woman on the other line was saying to Ann but I couldn't hear my conversation! When Ann's call finished - mine went even fuzzier and all I could hear

Hi all, Trying to get fax reception going using a voicetronix openline4 card, however, there are two issues (as far as I can see) (1) Currently the voicetronix world (cards, firmware, drivers, channel prog etc.) does not do fax tone detection. I have spoken to the voicetronix guys , understand what has to happen there and may do some hacking if I can resolve the second issue. Meanwhile, I

Hi all, just joined the list. Wanted to say 'Hi'. I'm an Asterisk user in Gibraltar, and wanted to say 'Hullo' to you all. I'll watch the list and I if I can help out anywhere I will. I'm running Asterisk on a RedHat9.0 system, with a VoiceTronix OpenSwitch12 card (sorry Mark!) and I really like Asterisk, it's reminded me why I started working with OpenSource.

Hi all, I have this project that requires me to use 8 PSTN lines and possible more. I was thinking 2 TDM cards with FXO modules. The I got to read the "Qs about FXO/FXS cards" thread and that scared me. Can anybody recommend anything that is known to work ok with no mysterious problems? I was thinking OpenSwitch12 cards. What do you guys think? Any help is appreciated. Regards, Hadi

Hi all. We have just setup and asterisk with a 4 line zaptel board with Cisco 7960 and BudgeTone-100 IP phones. All works fine except for this nagging echo. Whenever I talk, I hear my voice echo back.. This only happens whenever I talk on an actual phone call. Whenever I talk to another extension, no problems. I would appreciate any help. I have searched the google lists and have not found any