similar to: Dell Poweredge 4300 + PARC 2 (Megaraid) Centos 4

Hello, I am having issues making my box boot with Xen. I am working with linux-2.6.16.28-xen on a gentoo box. The server is Dell PowerEdge 1850 with Perc 4e/Si, FW 521X. When dom0 reaches the point of scanning the SCSI controllers, it hangs in a loop aic7xxx_dev_reset_returns 0x2002. My regular (non-xen) kernels come up fine with detecting my adaptec scsi controller. Had anyone had the same

I have a new (used)Dell Poweredge 1550 server with 2 scsi drives (dual 1ghz w/ 2048MB) that I'm attempting to install CentOs 4 onto and am having problems getting the darn thing to recognize the hard drives. (it's worth noting that it's running RAID 0 and the RAID bios recognizes both drives as being in "optimal" state). I start the installation process and all is going

Hello, Just chiming in here: >From: asterisk-users-bounces@lists.digium.com >[mailto:asterisk-users-bounces@lists.digium.com] On >Behalf Of >bdolljr@bigskytech.com >Sent: Viernes, 22 de Julio de 2005 01:24 p.m. >To: Asterisk Users Mailing List - Non-Commercial >Discussion >Subject: RE: [Asterisk-Users] Dell Hardware >> Mmhh nice !! So, why did Digium forbid it :)?

Hi boys! My xen 3.3.1 dom0 crashes unexpectedly , I''ve a dell powered 2900 III with a PERC 5/9i RAID controller. It works for a few days , then it goes into black and the raid controller leds are fixed at green (no blinking at all). I''m using the following drivers: Device Drivers ---> SCSI device support ---> <*>

Does Centos/RHEL 4.4 supports the CERC 6-Channel SATA RAID Controller that comes with the Dell PowerEdge 830 Tower Server? -- ------------------------------------------------------------ Erick Perez Panama Sistemas Integradores de Telefonia IP y Soluciones Para Centros de Datos Panama, Republica de Panama Cel Panama. +(507) 6694-4780 ------------------------------------------------------------

Hello I have a problem to boot my xen kernel, I have a debian sarge 3.1 stable, download xen-3.0.2-src.tgz, extract and compil it with the command "make world" But at boot I have an error : "cannot open root filesystem sda1" My raid controler is a perc4/di raid 5 controler lspci -v said : 0000:02:0e.0 RAID bus controller: Dell PowerEdge Expandable RAID controller 4 (rev

It's Digium, not Dell. I have two identical Dell 1850s, each with the allegedly offensive built-in E100 Ethernet ports. I placed a TE410P card in each. One worked great, the other would not modprobe. Upon examination, we discovered that the two TE410P cards had different firmware revisions. Turns out the one with the older version was the one that worked. We sent the second card back

Hi all: I've been developing and testing on a tdm400p card and it's been going well. As you probably know, the tdm400p needs an ide power supply, but the dell poweredge 2600 that this card is destined for eventually has all the power supplied on the backplane with no ide cables. The thing is, on the motherboard in the server, there is an ide ribbon connector, and beside that, something

The raid card is an Adaptec 2100S. -----Original Message----- From: Josh Paetzel [mailto:josh at tcbug.org] Sent: Saturday, November 11, 2006 9:35 AM To: tclug-list at mn-linux.org; pjcrump at bitstream.net Subject: Re: [tclug-list] Drives Not Recognized on Dell Poweredge 1550 CentOs install On Saturday 11 November 2006 01:20, Phillip Crump wrote: > I have a new (used)Dell Poweredge 1550

The issues I''ve had with PE2650 and Linux in general all related to a lack of IRQ''s. I had to disable all non-essential devices in the BIOS (lpt, usb and com). It seems the BIOS on that server still has legacy IRQ issues (< IRQ15). In my xenU''s I also renamed /etc/sysconf/hwconf so it would''nt try to init any hardware devices directly. Maybe these options

Does anyone have any examples of using realtime database driven call parking lots. I am on version 1.8.x My goal is to be able to do database driven multi-tenant parking lots with out adding sperate entries into Features.conf for each lot. I also need to be able to use the same parking extension pool for each tenant but sand box them into sperate lots. We have been able to do this for every

Dear All; I want to install Centos 7 latest build on NEC Server 5800/120b-2. The installation wizard fails to detect the storage connected to LSI SATA MegaRaid PCI. Centos 5/6 were working fine with this H/W configuration but not the case with Centos 7. Please; advise. Fawzy Ibrahim Redhat Certified Engineer

Hallo, I have to try install xen-4 on dell pe2850 (Raid: perc4). booterror: megaraid Couldn''t register IRQ 7! But megaraid works with linux-2.6.18.8. Enclosed my tests: 1. Compile xen-4.0 + linux-2.6.32 snapshot (Jeremy) from [8] (test 1). cd /usr/src/xen-b29254c make all modules modules_install 2>&1 | tee make.out cp -p ./arch/x86/boot/bzImage /boot/vmlinux-2.6.32 #

Hello, I''m trying to install Xen3 on a server, but I can''t make the MegaRAID driver work. I''ve installed Debian Sarge, the stock kernel (2.6.8.2) works perfectly with the hardware. The SCSI RAID driver is megaraid. Hardware is : - IBM eServer xSeries 330 server - Dell PowerEdge RAID II controller I''ve recompiled the xen dom0 kernel (2.6.12.6) to include

On Xen-3.4 (unstable version), I have created CentOS HVM guest & WS2K8 HVM guest and dedicated MegaRAID SAS controller but I am not able to see the disk which is connected to MegaRAID SAS controller when I do fdisk -l (vtd support is enabled in Xen). Looks like the pci device(MegaRAID SAS controller) is getting dedicated successfully as I can see the device in the list of pci devices shown by

Thank you for your help. Le 05/01/2015 19:10, John R Pierce a ?crit : > works here fine on the 9261, which is an OEM version of the same card > with the connectors in a different orientation... you might check your > LSI firmware revision. My firmware seems to be more up to date. Anyway, I will try to update firmware. I have to check how to do that. # dmesg |grep LSI scsi4 : LSI SAS

Does anyone have the 'MegaRAID Storage Manager' GUI working on CentOS 5.5? I can run it, but it won't let me log in. The docs state that it requires the local root username and password - but it always rejects this with "Message = Login failed: Invalid username or password!" Thanks James Pearson

Hi all, I''ve been using Xen for a while and I am trying to install it onto a Dell Poweredge 2950. The 2850 uses a PERC4/Di raid on motherboard, which requires the LSI Legacy SCSI Raid driver to be compiled into the 2.6.11-xen0 kernel. I''ve been recompiling the kernel by: 1. Go into the linux-2.6.11-xen0 directory. Select the driver using "make ARCH=xen

I've been googling, and haven't yet found the answer: does anyone here know if a MegaRAID SAS 2008 (falcon) (rev 03) can handle drives bigger than 2TB? mark

Release notes say no support for the RAID card in a box I just picked up...is there no hope for this box running 2.6 kernel? http://www.redhat.com/docs/manuals/enterprise/RHEL-4-Manual/release- notes/as-x86/ The kernel shipped with Red Hat Enterprise Linux 4 includes the new megaraid_mbox driver from LSI Logic, which replaces the megaraid driver. The megaraid_mbox driver has an improved design,