similar to: IAX native transfers

I have about 30 GXP-2000 phones running 1.0.1.9 which have all been configured using the provisioning feature so the configuration is all identical. The problem I am having is that they randomly seem to stop registering with asterisk. When they stop registering they can still make calls but oviously asterisk cannot ring the phone so all incoming calls go to voicemail. Has anyone else had similar

Hello,everyone, I encoutered some difficult with IAX when I run the asterisk. <---->internet <--> asterisk + NAT <--> DIAX my * box and NAT are at the same linux box which connecting to the internet using ADSL. The box has two network cards and two IP address,such as public IP:211.11.11.11 private IP:192.168.1.10 the windows box running DIAX lies behind the

Hello veryone, I have a strange problem. I have an asterisk (latest from CVS) with latest oh323 channel driver. I place calls with DIAX. The H323 gateways only support G711A De DIAX only supports GSM When I perform an inbound call: H323 -> asterisk -> DIAX :: sound is ok. When I perform an outbound call: DIAX -> Asterisk -> h323 :: sound is terrible and CPU load is 80% When I

Here is what I am attempting to do (which works well on Cisco Call Manger). I have some 7960's that have multiple lines on them. The second line specifically is a "helpdesk" line that is shared among multiple phones. Here is how I am making that line ring on multiple phones, maybe you have other suggestions: exten => 135,1,Dial(SIP/135@100&SIP/135@101,20,rt) So this

Hi guys As usual I am playing around with IAX soft clients. I was wondering with the various IAX clients, IAX client, DIAX, etc how's one park calls, transfer calls, etc since there is no flash key? Is there something I must do in the iax.conf or is it something I must do with the individual clients? Also, is it very difficult to use musiconhold with the IAX software clients? Thanks a

Hi, I seem to be having problems with IAX clients based on the iaxClient library. I have been working on my own client (an augmentation to the Call Manager I released last week) and it seems to regularly miss incoming calls entirely. It also occasionally misses the drop signal when the remote end drops a call. Has anybody else seen this kind of behavior? I have tested with my client, with

Hi Folks, I'm trying to get DIAX to work as an IAX soft phone and I'm having some issues. Outbound calls from the phone to the rest of the world are fine. It's just that I can't get the inbound to work. I have a stanza in my extensions.conf that reads; exten=>_3410,1,Dial(IAX2/3444@default|20) And a stanza in my iax.conf that reads [3444] type=friend context=default

Is there any winblows softphone available offering g729 *and* IAX? I couldn't find any http://www.voip-info.org/wiki-VOIP+Phones The best choice should be dIAX, but it is only GSM.

I have found out that the reason why my call transfers are not working when using the IAX protocol is because Asterisk is performing a native bridge. If I force the user of one of the clients to use a different codec so that Asterisk is unable to do a native transfer then it works. How can I disable native bridge for IAX calls? I know for SIP you can put 'canreinvite=no' but this does

I have loaded festival-1.4.3 patched with the 1.4.3.diff file. Festival source is in /usr/src/festival dir. When I try to use it I get this from asterisk: -- Executing Answer("SIP/chad-57a4", "") in new stack -- Executing Festival("SIP/chad-57a4", ""I am talking"") in new stack == Parsing '/etc/asterisk/festival.conf': Found

Hi all, A new version of DIAX (0.9.8a) is ready to be downloaded from the following locations: http://www.laser.com/dante or http://www.geocities.com/tdanro What's new in 0.9.8a: - unconditional autoanswer or based on CallerID (user configurable); - use any Ericsson/SonyEricsson GSM/PCS to control DIAX (feedback on the phone display) through Bluetooth (or serial cable). You do not even

I've downloaded diax-0.9.6b and configured for IAX2. Calls from Diax to * are perfect. However, when calling from * to Diax, I get the following: channel.c:1097 ast_read: Dropping incompatible voice frame on IAX2[mike]/3 of format GSM since our native format has changed to ULAW In iax.conf I have: allow=all disallow=g723.1 disallow=lpc10 allow gsm Has anyone else seen this? Thanks,

hi i am trying DIAX and *. i cannot make calls from ne DIAX to another. whats the config? exten=>44,1,Dial(IAX/username,20,tr) ??? just a guess. any help will be appreciated. cm ===== Designs __________________________________ Do you Yahoo!? Protect your identity with Yahoo! Mail AddressGuard http://antispam.yahoo.com/whatsnewfree

Greetings, DIAX seems to work well placing calls, but I can't actually receive a call . Here, DIAX (x305) "registers", then I use a sip phone to place a call to DIAX (which definitely is not in use by me at debug time, but it is idle on my desktop.I think), and then * goes to vmail. Here's the debug output: affinity*CLI> iax debug IAX Debugging Enabled Rx-Frame Retry[N/A]

Hi all, A first basic version of DIAX as an ActiveX can be downloaded from: http://www.laser.com/dante/diax/activediax.zip There is only one small file (diax.ocx) and a readme.txt with the usage instructions. For the moment you can only place authenticated (or not) calls and there is no feedback (ring, messages, etc) Put this simple thing on your web page and you will be able to dial from any

Hello, today I tried a DIAX -> * -> DIAX connection over the internet (768/128 ADSL connection on both sides). The sound quality was great. However, we had some latency problems, and also, if both sides where not talking the first words had some problems getting thru. Is this expected, is there anything that can be done on our setup, any magical iax.conf entry? Thanks and best regards

Hi all, Thanks to Steven Sokol great work, the IAX2 bug in DIAX is now solved. For the interested people, you can download the new DLL (just the IAX2 version) from the following location: http://www.laser.com/dante/diax/wiax2.zip Replace the wiax2.dll file in the app directory with the new one and this is all. Please test it and send me your feedback. I intend to release a new DIAX version this

I've configured the DIAX phone. It registers with the * server, and I am able to make calls from DIAX. However, when I try to call the DIAX phone from another phone, I get a busy signal. My extensions.conf: exten => 70,1,Dial(IAX/mike/mike,30,tr) # IAX Mike exten => 70,2,Voicemail(u70) exten => 70,102,Voicemail(b70) and my iax.conf: [mike] type=friend username=mike host=dynamic

I am having a problem with softphone registration, having read the list and watched it for a while for similar problems I just cant seem to figure out the problem. Using SJPHONE or DIAX , I can make outgoing calls but I can't get them to register with asterisk, I have other sip devices registering OK-7940's. From the list and the digium web site this seems to be a straight forward set up

Hello, I have asterisk setup with Broadvoice. It works great as PBX and Outgoing calling server for all local clients withing 192.168.1.0 network. My asterisk is running over NAT. I use linksys router. Now, I am trying to connect from outside to my asterisk server. I use Diax as iax client. For some reason I cannot connect to my server from outside. On my router I forward those ports to my