similar to: IAXy problems -- and no documentation

Hi all, I have done a major upgrade, first I have bought a Digium TDM400P (TDM02B) 2-Port FXO to replace x100p cards, than moved from an old version Asterisk to a new centos 4 box, compiled asterisk from Asterisk CVS-HEAD built on 2005-06-11. Seems that my iaxy is now "incompatible" with the TDM400P. When I receive a call from the TDM02B, the caller can't hear my voice (I am using

I just bought a new IAXy box and am only achieving one way calling. Both iax.conf and the IAXy support ulaw and gsm. When I try to call, however i get this error: Feb 11 15:20:32 NOTICE[7963]: channel.c:1893 ast_read: Dropping incompatible voice frame on IAX2/iaxy-2 of format ilbc since our native format has changed to ulaw I added support for ilbc on the IAXy and in iax.conf and am still

Just setup *, got a developers kit FXO where the incoming/outgoing pstn is plugged in. I've then got an IAXy that is plugged into a Philips DECT phone. * is setup so that the [bell] section rings the phone - exten => s,1,Dial(IAX2/myuser,30) What's happening when someone calls my number is that the phone rings 3 times before you hear the dect phone ringing. Anybody got any ideas as

Hi, I've provisioned an IAXy adapter on a network segment local to my asterisk server. Provisioning is fine, as is the registration and use of said device. Since the local address is private address space, I setup the public IP address of my Asterisk server as the alternate. When taking it to another location (NAT again behind a WRT54G), it doesn't seem to work. Here's my current

Hi, Ive been struggling with asterisk for a few days now. I understand pretty much how it works and how to tie things together (SIP -> SIP internally works fine etc), but just cannot get asterisk to work with an X100P clone (its a Ambient MD3200, if that means anything to you guys). I have tried (initially) asterisk 1.07 with zaptel 1.07, and now Asterisk CVS-HEAD with zaptel cvs. Both give

Hi all, After upgrading to lates CVS head, I have problems using a IAXY device, having slin problems: Jun 15 18:59:31 NOTICE[8197]: channel.c:1475 ast_read: Dropping incompatible voice frame on IAX2/lise-1 of format slin since our native format has changed to ulaw Because of that outside caller can't ear the callee on the IAXY. Found somewhere that disabling transcode in asterisk.conf

I have the following in my extensions.conf [ext-local] exten => _53XX,1,Wait(2) exten => _53XX,2,NoOp,Dialing ${EXTEN} from ext-local-custom exten => _53XX,3,Macro(dialout-trunk,2,${EXTEN},,) This is used to match inbound caller-id for my legacy PBX. It works fine for inbound calls, but not for internal SIP calls. If I call from a SIP phone that is also in [ext-local], it looks like it

I have somewhat miraculously got my server to stay up for over 24 hours now. I was at my remote location, however, and I can't make calls that used to work find. I get the following messages. I get a brief bit of good sound and about the time I see the message "Ooh, voice format changed to 4" all further sound stops. The machine seems to be stalling, but I have noload on both oss

In the mailing list archives, I found a message that indicates that the IAXy has the ulaw, alaw, and g726 codecs, but I cannot find anything official on Digium's site about it. The Installation Manual has an example iax.conf file that indicates the ulaw codec, so I know that one is good. But we are thinking about using the IAXy over a VPN, to replace our MultiVoip. alaw and ulaw are

I have a brand new IAXy I'm playing with. I do not get a dialtone on the phone, or any response at ll on the phone. No sound, no dialing, no ringing. The phone and wire are tested and known to be good. I think I have it setup correctly. When I give the iaxprov command I get this: #iaxyprov 192.168.1.90 iaxy.conf 02: c0 a8 01 5a 05: 11 d9 03: ff ff ff 00 04:

Hello. I picked up a couple of IAXy's for testing. Unfortunately, I read the negative comments only after I bought 'em :( Regardless, I provisioned one unit using my local Linux computer. Now, I'm trying to set it up to provision using the remote * server whenever it tries to register, but it seems I need to know the "service identifier" for the specific device. I can't

As subject, (i've updated spandsp to latest version) and this is the log: Sep 15 13:06:50 VERBOSE[14085]: -- Attempting call on Zap/g0/2479 for application txfax(/var/tmp/ast_fax-1126782409.10240.1804289383.0|caller) (Retry 1) Sep 15 13:06:50 DEBUG[14085]: Using channel 1 Sep 15 13:06:50 DEBUG[14085]: Dialing '2479' Sep 15 13:06:50 DEBUG[14085]: Deferring dialing... Sep 15

I'm having some problems with a bunch of older IAXy devices. I have three S100I devices working. I can call each device from each other and everything works perfectly. When an inbound call comes in (from PSTN) and is routed to the device, it works perfectly as well. The problem is that when I place an outbound call (to PSTN), the remote party can hear me well, but I cannot hear the

I just bought an IAXy and have been using it with * and NuFone. Around once every 24-48 hours of operation (not off hook, just powered up), when I pick up the phone I hear loud static instead of dialtone. If there's an incoming call, the phone will ring and * CLI will show that it's trying iaxy, but when picking up--no answer to * and loud static. The incoming call goes to VM. Cycling

Hi! Could someone please tell me where in the CVS tree the IAXY firmware is and the utility used to install/flash the IAXY? Or a perhaps cvs command that shows me which directories are available in the CVS? I did 'man cvs' but can't find such a command or flag. Also is there any documentation for the IAXY in the CVS tree or anywhere or C comments I can read somewhere to glean some

Hi list, Just installed spandsp. In my limiting testing, I have an issue on a Philips fax machine (HFC21) directly connected to my * server through TDM400, reception with rxfax works fine, but txfax always fails. Below is a transcript of failed transmit. This is with asterisk-1.0.3 (with native moh patch but I don't think it is the source of the problem). I already tried libtiff 3.5.7,

Hi, I recently acquired an iaxy device. Since I turned it on, the phone makes a strange noise. Is this normal? I'm not sure if there is some configuration that needs to be provisioned for it to quieten down. With my LinuxJack, the phone was dead until it the device was enabled by software, which is why I'm not sure if the behaviour of the iaxy is normal. I am a newbie with digium

Hey Everyone, I recently purchased a few IAXy units for some testing, and have come across a some problems. One of them can be provisioned but will not ring the connected telephone. It also does not provide a dial tone when you pick up the phone. When a call is made to the IAXy one of the green lights on the board goes from a solid on state, to a flashing state that coincides with the

Hi everyone, I'm using the IAXy boxes and i'm having some trouble when I use it with the ADPCM codec. When I use the ADPCM codec only one person (out of the two of the conversation) is able to hear the other, but when I switch to ULAW codec everybody can hear the other. The ULAW codec is too heavy for my bandwidth (64Kbits/s) and its sounds choppy, the ADPCM codec sounds good but only

Hi everyone, I'm using the IAXy boxes and i'm having some trouble when I use it with the ADPCM codec. When I use the ADPCM codec only one person (out of the two of the conversation) is able to hear the other, but when I switch to ULAW codec everybody can hear the other. The ULAW codec is too heavy for my bandwidth (64Kbits/s) and its sounds choppy, the ADPCM codec sounds good but only