similar to: Fax and PRI

I'm really trying to understand this. I have a Sipura 2000, brother MFC, and SpanDSP set up on asterisk. because asterisk softfax was not working well, i set up faxes to goto line2 on the sipura. this is working fine, i have only tested a few short faxes, but already my completion rate was 100% vs 5-10% that spandsp and asterisk gave me. here's the odd part. using the fax machine, I

Hi, On one of our servers, we're having problems with incoming faxes. The connections come in through a PRI into a Digium TE820 card. 'fax show stats' yields the following: FAX Statistics: --------------- Current Sessions : 0 Reserved Sessions : 0 Transmit Attempts : 0 Receive Attempts : 740 Completed FAXes : 740 Failed FAXes : 486 Spandsp G.711

I'm proposing to install an Asterisk PBX at a collocation facility for a remote customer. Each of the customer locations will have an SPA-3000 with the FXO port connecting a POTS circuit and the FXS port connecting a fax machine or red phone. In addition to voice traffic, the customer has a high volume of incoming and outgoing faxes. Would it be possible, using g711 between the SPA-3000

Good day all I have a pri card,e100 What I want to do is If a fax comes in for number 1234567890 it should be e-mail to user1@domain.co.za If a fax comes in for number 0987654321 it should be e-mail to user2@domain.co.za ens.... Can this be done and how????

We are doing this with the latest spandsp, iaxmodem and hylafax. Seems to work very well for us so far. -Jonathan > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users- > bounces@lists.digium.com] On Behalf Of Michael Gaudette > Sent: Tuesday, March 21, 2006 3:34 PM > To: 'Asterisk Users Mailing List - Non-Commercial

Guys. Ive been testing how to receive faxes using TDM400P cards and so far, after playing with gains, echocancell and echotraining on zapata.conf.. Ive ha dno luck, faxes come in as garbage or broken or with blank lines. Anybody has successfully done this? Any tips.. Also I have some ideas: 1. Is it really possible to get fxes on a fax machine using ATAs like the sipura 2002? Even using ulaw

Hi, I have read a lot about the thread of faxing support in Asterisk as well as spanDSP. However, either I don't fully understand other people's applications or may be what I'm trying to do is different from what others are trying to do. I have a very simple setup. I have an asterisk server with a TE110P connected to the PSTN via T1 PRI (Asterisk A). I have another asterisk

I want to setup a phone system that can allow the caller to type in a faxback number, and automatically be sent a fax file. Is this possible with Asterisk? Or using Asterisk & a Linux fax program? I've seen stuff about incoming faxes, but nothing about outgoing. This is over a Zap channel, not IP, btw. Thanks.

Hi Last month, people reported a crash with Asterisk 1.2.13 and spandsp-0.0.3 when receiving a fax using fax detection. Today I've tried 1.2.14 with the latest spandsp 0.0.3pre27 and with the snapshots for app_rxfax.c and app_txfax.c. The problem still happens. Has anyone found how to resolve this issue? I tried emailing Steve Underwood (with crash backtrace) but he hasn't

Hi, Anyone using SpanDSP with Digium TDM o TE cards to receive and email Faxes? Thanks, Javier Ergas R. Director General de Tecnolog?a Pibix Telefon?a IP http://www.pibix.cl -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060615/ed77e5d1/attachment.htm

Hi all, I'm trying to setup an asterisk based fax receiving machine. i'm using asterisk 1.2.18 and app_rxfax with spandsp 0.0.4pre9 I have no problems with a modem-fax, but with the fax machines i have tried almost every fax fails, both in sending and receive. the machines are sending a receiving a lot of faxes every day and working well, so i think the problem is on the spandsp side. i

Hi, Several people have reported problems sending faxes from spandsp-0.0.1k to Canon FAX machines. A spandsp user had the same problem with another make of FAX machine, and traced the problem to a bug in the file t30.c of spandsp. Line 542 says s->t4.rx_file[0] where it should say s->t4.tx_file[0]. This fixes his problem, and I suspect it will also fix the Canon fax machine problem.

Hi all ! Let's say you have about 6 small different companies sharing the same E1 / Asterisk server, and every company needs its own fax number. Since they don't really need fax machines, what would be the most cost-effective way to handle this (keeping fax-privacy at its best) ? Is there a way to configure Hylafax or sth & one modem behind an ATA-186 to email faxes to different

Hi list, I'm running current SpanDSP http://www.soft-switch.org/downloads/spandsp/spandsp-0.0.4pre6.tgz with Asterisk 1.2.22 somewhat successfully. Most Fax machines do work but I have problems with people having Tobit FaxWare and Shamrock CapiFax. http://www.tobit.com/login/mrd.asp?CategoryID=120 http://www.shamrock.de/ I've got black bars over the pages. In Tobit some content is Ok,

List, how can I put fax server functionality on Asterisk? * as a reliable fax server for 500-1000 fax/day (mostly incoming)? Fax server should be like HylaFax, i.e. stable, low maintenance and functionality like receiving fax as email with PDF attachment, sending faxes per WHFC. Faxing with spandsp using bri_stuff (BeroNet/Junghanns quadBRI ISDN cards) shortens some faxes, or faxes loose lines,

what method is preferred: haylafax and Iaxmodem or spnadsp for faxing. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071228/e829632a/attachment.htm

Hello, I have spandsp setup to accept incoming faxes and receiving tif files via Email. Using tiff2pdf, or tiff2ps -a2 or even tiffsplit, the last page of the fax is cut off and the quality of the text looks "squished". I "figure" it's a tiff parsing thing, as opposed to a problem with my spandsp installation (heh). Has anyone experienced the same thing, or can

>Does IAXmodem allows you to receive faxes with any extensions >(auto-detecting incoming faxes). You just let Asterisk do the fax detection for you, and when it hears CNG, send it to the fax extension, and your fax extension would just Dial() one of the IAXmodems (using IAX) >>DRi@b-w-computer.de wrote: >> sure in an small office you can use iaxmodem/hylafax to receive faxes

Need to replace our older soho fax machine with something more current. Would like to run the fax line through *, but haven't been able to make spandsp work correctly with digium TDM04b card. Our fax volume is very low (maybe a few per week), but we have multiple offices in three geographic locations and would like to be able to email the images to the correct location. For planning purposes,

Dear all I have a Asterisk server (version 1.0.7) running with a TE110P card on a 3Ghz P4 machine (running nothing else but asterisk) So far so good. Today I was trying to receive faxes using spandsp fax client. I used spandsp v0.0.2pre18 (which compiled against libtiff 3.5.7) It compiled fine, installed fine, run fine. But when sending a fax (from a Brother fax machine) the image received