similar to: Database of event activity

Hi everybody, Well, I really hoped that until now i know how to do a selection ..... but obviously i don't. So risking your laughing at me - here you go. I have a table with lots of vegetation data, and one column specifies in which region the data is. There are only 2 regions, region 1 and region 3. I want to select all data that belong to region 1 and after do some xtabs on it. If i do

I have a couple of numbers that are diverted to a number that is conected to an isdn30 card, running asterisk 1.4. eg. 123456 => 22334455 654321 => 22334455 What I would like to know is the number of the orginal number dialled (123456 or 654321). I thought that RDNIS was the answer, but it is always coming up blank. When I did a debug on the pri span, I saw the following message

I'm trying to build a test suite so that I can run "calls" through and verify the call results. I've made a cross over cable and linked my 2 ISDN30 ports together. So now I can dial out on span 1 , and to receive the call on span 2. in the context for span 2, I have the following: <snip> ; #1 "answer" a call and play music 000XXX : ring for a random period,

Hai, Yeah, you have probely one of these 2 problems. ( or both ) 1) This is probely because your "computer" *(user) does not have any acces. Recheck you permissions on the share and and folders for that specific policie. 2) Connections specific suffic and/or network suffic is wrong. Check if you pc is setup correct with dhcp. Ipconfig /all ( check these, and make sure you have

Sorry for my delayed response, my job has had me out of state for a while. I wanted to add that I am not getting the Kerberos error in my event logs. It just flat out claims that it cannot read gpt.ini for some reason. This happens randomly, whether dc01 or dc02 is the logon server, and the strange part is that most PCs can work fine, but one or two randomly won't. In other words, if pc1 and

Hi, I guess I need some help with management interface. I would like to watch calls through the management interface, but I don't know how to identify which call an event belongs to or in other words how to associate a call and uniqueid field of event. Let's say I send the following manager command: action: originate channel: sip/12125551111@pbx1 callerid: 12125551111 MaxRetries: 1

I dont read any france but translators work ok. ;-) pfew.. Ok any firewalling on the DC's? if so, open TCP and UDP port 88. Or try short without firewalls on, on the DC's. Other options to try is recude the MaxPacketSize in windows. Looks like a to big package which is rejected. Ow and above is also needed on the DNS port 53. Open tcp and udp. If the upd packages are to big,

On how to even search for this "feature" as I have no idea on what it can be. I've got a meridian linked to * (by EuroISDN) which is linked to a ISDN30. I can make calls from the meridian, and receive calls into the meridian. Great stuff. However, if someone dials an invalid number, then instead of hearing a "three tone", the line just drops and goes dead. The console

I was cleaning and working on laptops most of the day. Check my logs, I did plenty of work. -----Original Message----- From: "asterisk-users-request at lists.digium.com" <asterisk-users-request at lists.digium.com> To: "asterisk-users at lists.digium.com" <asterisk-users at lists.digium.com> Sent: 11/29/2008 1:13 PM Subject: asterisk-users Digest, Vol 52, Issue 81

Well, it works for me .. YMMV. Yesterday I had a problem where I had a meridian talking to * via a PRI card, and from * to the pstn via an isdn30 link. The problem was that if the number was bad, or engaged then the meridian line simply dropped, not giving the operator any indication of what occurred. With much help from this list, I managed to construct a dialplan which solved our issues.

I'm just curious to know if anyone is using a usb 2.0 / ISDN30 (specifically EuroISDN) device. We are looking to purchase another pci card, but was wondering if anyone has any horror / success stories to share regarding a usb device. TIA Julian

Ok, same as im running. DC => (replicated zones) => Slave DNS << == Client pc's. Have you tried to reset the network id manualy from withing windows. ( where you change/add the computer to the network ) The button "change network-id." I have seen these things also with pc's which are wrongly syspreped. Which cases same SID's for the pc's. But

Under 1.4.5 and 1.4.6, I've seen a few instances where the channel name in queue log entries is replaced by a snippet of a manager event: --START-- 1183582823|1183582823.104763|queuename|SIP/XXXX|REMOVEMEMBER| 1183582828|1183582793.104744|queuename| Context: macro-dialout Extension: s Priority: 3 Application: GotoIf AppData: 0?blockclid Uniqueid: 1183582822.104759

Hello All, I'am a new Asterisk user, and i have the following question. The following is the Status of all open channels from my Asterisk system, which was received through the Asterisk Manager Interface ((AMI)). ==================================================================== action: Status actionid: 65066874_3# Response: Success ActionID: 65066874_3# Message: Channel status will

Hello, i have a problem with the hangup cause received from the AMI in the Hangup events. All calls that arent answered after ringing are returning hangup cause 16 (normal clearing) instead 19. Im running asterisk 1.4.11, the calls are generated to a SIP peer using the AMI originate command. This is the 'sip debug' output: Reliably Transmitting (no NAT) to 192.168.0.70:5060: INVITE sip:1

I found this one. Check which one works for you. http://www.eventid.net/display-eventid-40960-source-LSASRV-eventno-8508-phase-1.htm Im sure this is not a samba configuration problem. Greetz, Louis > -----Oorspronkelijk bericht----- > Van: samba [mailto:samba-bounces at lists.samba.org] Namens L.P.H. van Belle > Verzonden: dinsdag 29 maart 2016 16:18 > Aan: samba at

Hi all, I'm new in the list, and I have a problem upgrading from asterisk 1.2 to asterisk 1.4: There is a diference from asterisk1.2 to asterisk1.4 in AMI events. When I do a call to a queue (with the same extensions.conf dial plan) with ast1.2 and ast1.4, in ast1.2 apper 3 newcallerid event in ast1.4 apper only 2. It is normal? anyone knows it? what is the reason? I

Hi, I have a global data-frame in my R script. At some point in my script, I want to update certain columns of this data-frame by calling in an update function. The function looks like this: # get events data. This populates a global event data frame in the R-script events <- getEvents(con, eventsFilePath) # events has columns eventid, timeStamp, isSynchronized, timeDiff; with millions of

Dear R-list, I am trying to import (all) frames from a Microsoft Access database as individual data frames in a fancy loop, but I'm having troubles figuring out how to use the 'sqlFetch' from the RODBS package in a loop (mostly because I can't figure out how to loop over elements (I came from stata) I would very much appreciate if anyone on the list could help me solve this

If anyone can help me with this I'll be soooo grateful :) We have a isdn30 line, with a DDI range. We also have 2 business units that have separate 0870 numbers that are mapped onto 2 DDI numbers. I would like to be able to present these 0870 numbers from the business units so that the correct number is displayed on a callerid, or when 1471 is dialled. BT claim that I can only have a