similar to: U320 PCI-X SCSI HBA experiences on x86_64

On Thu, Nov 5, 2009 at 11:47 PM, Alan Hodgson <ahodgson at simkin.ca> wrote: > On Thursday 05 November 2009, Rudi Ahlers <Rudi at softdux.com> wrote: >> According to google search, errorcode 28 means the HDD is full. But it >> isn't: >> >> >> root at vps:[~]$ df -h >> Filesystem ? ? ? ? ? ?Size ?Used Avail Use% Mounted on >> /dev/sda1 ?

-----Original Message-----From: John R Pierce <pierce at hogranch.com> Reply-to: CentOS mailing list <centos at centos.org> To: centos at centos.org Subject: Re: [CentOS] SCSI drives and Centos 7 Date: Sat, 29 Apr 2017 11:19:38 -0700 On 4/29/2017 10:49 AM, Gregory P. Ennis wrote: > I am remote from the unit today, and do not have a good way to look at > the board today, but the

I'm looking for a well-supported ExpressCard or PCMCIA/CardBus SCSI card that can do at least FastSCSI (Narrow, Wide not necessary) that is supported by CentOS 7. I have an Adaptec SlimSCSI 1460D, but it doesn't seem to be supported (it's previously supported by the aha152x driver). Any ideas are welcomed, other than 'just use a desktop.' I am not sure a USB or Firewire

-----Original Message-----From: John R Pierce <pierce at hogranch.com> Reply-to: CentOS mailing list <centos at centos.org> To: centos at centos.org Subject: Re: [CentOS] SCSI drives and Centos 7 Date: Sat, 29 Apr 2017 13:31:11 -0700 On 4/29/2017 12:42 PM, Gregory P. Ennis wrote: > what does `lspci` have to say about this raid card ? > > John, > > Thanks for the prompt

I am currently testing an Overland Tape storage unit with a LTO-3 drive on CentOS 4.4. After a random amount of time but usually when we have backed up about 0.5-1TB we get scsi errors which cause the backup to fail. I have rebuilt the box with Solaris 10 x86 and Windoze to prove the hardware and have successfully backed up over 3TB on each OS without error. Can anyone offer advice on how to find

Date: Sat, 29 Apr 2017 10:17:55 -0400 > On Apr 29, 2017, at 9:50 AM, Gregory P. Ennis <PoMec at PoMec.Net> wrote: > > find a way to make the installation disc of Centos 6 identify the SCSI > drives. What model LSI card? Is that card on the RHEL hardware support list? Does LSI/Dell have drivers on their site? Have you tried drivers from LSI/Dell and using the dd(driver disk)

I've got a box running C7, just updated (yesterday). It had an onboard RAID controller, and an HBA. I just installed a new, additional RAID card, all LSI. MegaCli64 only sees one controller. I can't seem to find the magic to see the others. I *know* the new card is a MegaRAID - the box it came in says so. The system sees it 1:00.0 RAID bus controller: LSI Logic / Symbios Logic SAS1078

Scott Silverman wrote: > On Tue, Jul 10, 2018 at 12:37 PM, mark <m.roth at 5-cent.us> wrote: > >> I've got a box running C7, just updated (yesterday). It had an onboard >> RAID controller, and an HBA. I just installed a new, additional RAID >> card, all LSI. >> >> MegaCli64 only sees one controller. I can't seem to find the magic to >> see

On Tue, Jun 20, 2017 at 04:24:32PM +0200, Gianluca Cecchi wrote: > On Tue, Jun 20, 2017 at 3:38 PM, Dominik Psenner <dpsenner@gmail.com> wrote: > > > > > to the following: > > > > <disk type='file' device='disk'> > > <driver name='qemu' type='qcow2' cache='none'/> > > <source

Hi, Are there CLI utility for RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2108 [Liberator] (rev 05) for CentOS 5.8? Regards, Kaushal

On 4/29/2017 12:42 PM, Gregory P. Ennis wrote: > what does `lspci` have to say about this raid card ? > > John, > > Thanks for the prompt : > > lspci demonstrates : > > 02:01.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID (rev 01) > 02:02.0 SCSI storage controller: Adaptec AIC-7902B U320 (rev 10) > 02:02.1 SCSI storage controller: Adaptec AIC-7902B U320

Hi again, just today an issue I've thought to be resolved popped up again. We backup the machine by doing: virsh snapshot-create-as --domain domain --name backup --no-metadata --atomic --disk-only --diskspec hda,snapshot=external # backup hda.qcow2 virsh blockcommit domain hda --active --pivot Every now and then this process fails with the following error message: error: failed to pivot

This is... odd. Got a 6.8 box, a Dell R320 lspci tells me 01:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2008 [Falcon] (rev 03) so it *should* accept an SAS drive. I've got a Cheetah that's a few years old, and having pulled it out of another server (in the datecenter), I put it in this box to zero it out for reuse... and the box refuses to see the drive. *Nothing* in

On Sun, Apr 30, 2017 at 1:03 PM, Gregory P. Ennis <PoMec at pomec.net> wrote: > Thanks for your help. I did not want to replace this machine with new > equipment, but it looks like I may need to do just that. > > Here are the results with respect to the lsi raid board for : > > lspci -nn > > > 02:01.0 RAID bus controller [0104]: LSI Logic / Symbios Logic MegaRAID

Dear list, I have inherited a CentOS-5 box with a LSI Sata Raid controller. It is configured as a RAID5 w/hot-standby. My concern is that I have no present means of determining the RAID status w/o downing the system and going into the bios to get status. If a disk has failed and brought the standby disk online, I would like to know about it, the day it happens by seeing it in syslog or getting

hi i m trying to install centos5 on my poweredge 2950 with no luck. the raid controler is LSI Logic / Symbios Logic MegaRAID SAS 1078 (rev 04) indeed all is going fine during the installation but when i reboot the server panic the first error i got is this one error mounting /dev/root on /sysroot as ext3: block device required it seems that it can't find the /dev/root devices. but when

Hi everybody. I have an HP StorageWorks array connected to one of my servers, connected via an LSI controller (lspci reports: SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS (rev 08)) on an HP DL385 running CentOS 5.5 x86_64. I have set up multipath and all is working but, when I create a snaphost and export it as a new LUN from the HP web interface, it

Just a little catch-up. This time I was able to resolve the issue by doing: virsh blockjob domain hda --abort virsh blockcommit domain hda --active --pivot Last time I had to shut down the virtual machine and do this while being offline. Thanks Wang for your valuable input. As far as the memory goes, there's plenty of head room: $ free -h total used free

hi, It looks that Xen currently only support ISA serial port, which is onboard. Is there any plan to support the PCI serial port? Thanks, Neo -- I would remember that if researchers were not ambitious probably today we haven''t the technology we are using! _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com