similar to: FXO PCI Master abort

Dear Zaptel and wcfxo devellopers, Hi, so far I have had no success moving this issue forward. Carl Andersson has been kind enough to help build various kernels to try, but with no success. So, I have tried to debug the problem directly. So far I have applied the patch below to wcfxo.c. (on the latest CVS head) This makes my system stable again (in that I dont have to keep pressing the big

I have read thru what other users have tried in this list when they have experienced seemingly similar issues to what I have, without success. I suspect there might be an issue regarding both the X100P and TDM04b cards being used in an Intel SE7525GP2 motherboard, as I had to even wait for a BIOS update from Intel in order to utilize my 3ware 9500 SATA raid controller on it (3ware Kb -->

Hi all, I've struggled for several days trying to get a Digium TDM04B 4-port wxfco card working on a Dell 1U PowerEdge 750 machine running Fedora Core 1. I finally got a call back from Digium who indicated that there is a fundamental conflict between the card and the PowerEdge having to do with PCI interrupts. Asterisk version is stable v1-0 12/29/04. The symptoms of the problem were as

So I'm all excited, ready to install Trixbox at home. Purchased my X100p card installed in a computer. I run Trixbox setup and boom I get this error message "FXO PCI Master abort" It repaets across the screen and I have to reboot. When I reboot the system hangs at adding hardware. Loading wcfxo and the system will not go any further. If anyone has an idea of something to try let me

Nov 12 08:54:27 steerpike kernel: Uhhuh. NMI received for unknown reason a0 on CPU 0. Nov 12 08:54:27 steerpike kernel: You have some hardware problem, likely on the PCI bus. Nov 12 08:54:27 steerpike kernel: Dazed and confused, but trying to continue Would my Digium TDM410P cause an NMI, or is my computer failing? - Mike

I have just noticed this message in my kernel logs, reporting the possibility of an error with my memory. This would go a long way towards explaining the problems i''ve been having. This particular error is occuring when i''m not running xen so is obviously not something brought on by xen itself. The strange thing is that the NMI error is always followed by the TLAN: eth0: Adaptor

Hello all, I've posted on this problem before. Well here goes again. I have an intel mobo with a p4 2.4ghz proc, 1GB Ram. It has built-in ethernet and vga and 6 pci slots. I dreamed of making this my household communications server: internet router, firewall, vpn and asterisk. Everything works except the TDM fxs card. Well it works for a little while and it dies: no dialtone, no

I have a normal backup phone (and an alarm panel) sharing the POTS line with the Digium X101P FXO: | | Wall |>---+------X101P FXO as Zap/5 | | | Phone & Alarm Whenever the Phone is used, Asterisk sees a 'false ring' signal immediately when the phone is hung up. The Alarm panel dials out nightly at around 1AM, and each time it completes the call, Asterisk

Hello, I have a game which runs almost perfectly (Europa Universalis III), there's just one problem: when you click a province to open the dialog, there is a noticeable delay. Since it's a specific problem to diagnose, I'm hoping it'll be as simple as running a profiler to see which WINE function(s) the game calls to complete this task, and hopefully fix the problem function.

Hi all, i've installed AMP and Asterisk following the INSTALL file and i have a problem with the TDM04B with 4 FXO: [root@srvoip ~]# ztcfg -vv Zaptel Configuration ====================== Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXO Kewlstart (Default) (Slaves: 02) Channel 03: FXO Kewlstart (Default) (Slaves: 03) Channel 04: FXO Kewlstart (Default)

> Subject: Re: [Asterisk-Users] Booting error - Unable to specify channel 2: > No such device I just went through all this as well. The best thing to do IMHO is to try to find a way to manually assign IRQ in the BIOS. Also, and this is what I didn't see at first, some slots SHARE IRQ. Avoid this! If you are not using USB at all, turn it off in BIOS if possible. Tell the BIOS

Hello, I have found a "bug", I think in the way TDM400P cards handle FXO interface disconnect/re-connect problems. Normally I do keep all the wires connected from my CO / PABX quite securely, but I had a need to re-route the cable from one side of the desk to another, and I simply disconnected the RJ-45 connector and plugged it back in. THIS PROMPTLY RESULTED IN VERY VERY SCRATCHY AUDIO

Hi, I've seen some reports about ruuning Intel modem with 537 or MD3200 chipset running with Zaptel drivers as a FXO port. Did anybody managed to set up a PCI faxmodem based on Intel536ep chipset to work with * and Zaptel drivers? Modem seemd to work just fine with Linux, but the driver says no;) some more info: Linux 2.4.26 mazuchna:~# cat /proc/pci | grep 536 Communication

If anyone is looking, I just ran accross an ebay auction for X100P Cards at what I thought was a very reasonable price. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3046843672&category=48483&rd=1 --------------------------------- Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software -------------- next part -------------- An HTML attachment was

I've had a few problems with my system holding the line after a call has been made, just now I rebooted and noticed the following in /var/log/messages Aug 13 17:23:15 Sheriff kernel: wcfxo: DAA mode is 'FCC' in the file wcfxo.c the following structure is initialised as below which would suggest that FCC is wrong for France or pretty well all of Europe. static struct fxo_mode {

Hello everybody, After going through multiple posts on Internet and trying different things I can't seems get zaptel wcfxo loaded on the server correctly. I run dual P3 500 Mhz box. After reading README.udev I put a file 60-zaptel.rules /etc/udev/rules.d # Section for zaptel device KERNEL="zapctl", NAME="zap/ctl" KERNEL="zaptimer",

Hello, I have asterisk running on Fedora Core 3 with a x100p (oem). After some time I got asterisk with some soft extensions working (u gotta love open source), but I'm stuck with outbound dialing. This is the diagnose: - detect 1 wcfxo channel. - when trying to make an outside call I get unable to create channel of type Zap. Everyone is busy/congested at this time - When I plug the x100p

Hi All, I have an equipment loaded with 4 X100P (numbered 1-4)) and one T400P (numbered 5-8). Everything works fine except that I cannot use one of the FXS ports (number 5). If I configure zapata.conf to recognize it, the whole system voice quality suffers. I've tried already to switch PCI slots, with no results. Below is a snapshot of my /proc/interrupts, maybe this can shed some light on

Hi, I am struggling to get rid of a conflict on DELL 2800 : PCI Parity error (EB113 on the display) I am learning linux and asterisk as I go along, there might be obvious things I should know, but bear with me. >From demsg below my 2 digium cards installed are listed (no config or connections done to digium cards yet), the conflict is with the TDM400P card, without that card, in any slot, no

Hi All I'm having some serious kernel panic while using digium cards. It may be related to IRQ shared. Can this cause a lot of drop call and bad voice quality ? Do you guys know if there is a way I can assign one IRQ for each digium card ? Thanks a lot. Here is the output of /var/log/syslog kernel: [ 3821.982893] Uhhuh. NMI received for unknown reason 20. kernel: [