similar to: Internal/External IP

Hi all I need to use three 512 kbps aDSL internet connections, in a load-sharing, link-failover scenario. Presently I am using Ipcop with a single DSL. Now, I seem to have two options...one..an Edimax quad wan port adsl router, with firewalling and NAT and second install a minimal linux distro for routing...something on the lines of LARTC....and keep NATTING, IDS & Firewalling on the linux

Does Asterisk support Radius accounting?.... -----Mensaje original----- De: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] En nombre de asterisk-users-request@lists.digium.com Enviado el: Lunes, 17 de Noviembre de 2003 12:08 p.m. Para: asterisk-users@lists.digium.com Asunto: Asterisk-Users digest, Vol 1 #1912 - 11 msgs Send Asterisk-Users mailing list

Hello I will briefly draw the situation Router with one interface eth0 , to local network 10.123.0.0/16 on a local network ADSL modem with IP 10.123.10.11 I want to use 10.123.10.11 as a connection to internet . Because of that I have created default route "ip route add default via 10.123.10.11 dev eth0" I do not want my ADSL modem to do NATing , since it shows to be slow. I have

hi, I've been running a pure sip asterisk box for a while now with no problems, and i've recently added an isdn2e line from bt in the uk. everything is hooked up and i've got it ringing my sip extensions, but the logs don't quite look perfect and i can't see any description of what i should consider to be normal behaviour. would someone be able to look this over and tell me

I had a compile problem with the CVS I downloaded on 21 June. I have a Debian box with 2.4.18 kernel (version needed for support of Conexant ADSL). There is a difficulty with Zaptel build regarding HDLC detection. It tries to build it in and then results in unresolved kernel symbols and fails to load. I have had to comment out the entire HDLC defines in zconfig.h to get a driver to install at

hi all what does it mean if the total network speed on internal LAN is greater than the external LAN and why it happens? the extrnal LAN here is the Intenet using a dedicated bandwidth. and BTW the linux box NATting has no shapping at all. just direct piping

Hello Looking for some help with a rather odd problem. We have Asterisk 1.4.10 running on a Linux box, within our Windows domain. Our Domain Controller is a Windows 2003 server, providing the normal Windows domain functions, such as DHCP and DNS. When we lose either our Domain Controller (for a reboot/maintenance) or external ADSL access, Asterisk drops all SIP registrations - even internal

Hi there, the subject says it all... I get the following error messages: ---- mmielke@pbx:~/chan_capi-0.3.5> make gcc -pipe -Wall -Wmissing-prototypes -Wmissing-declarations -g -I/usr/include -D_REENTRANT -D_GNU_SOURCE -O6 -march=i686 -DCAPI_ES -DCAPI_GAIN -DCAPI_SYNC -DUNSTABLE_CVS -Wno-missing-prototypes -Wno-missing-declarations -DCRYPTO -c -o chan_capi.o chan_capi.c

I just downloaded chan_capi.0.3.4a.tar.gz but it will not compile on my system (Suse 9.1). I compiled and installed Asterisk and it is running, did I miss a configuration or dependency for Chan_Capi somewhere ? cheers, Mike linux:/usr/src/chan_capi-0.3.4a # make gcc -pipe -Wall -Wmissing-prototypes -Wmissing-declarations -g -I/usr/include -D_REENTRANT -D_GNU_SOURCE -O6 -march=i686 -DCAPI_ES

Hello, I already searched on the mailing list, but I didn't found a solution to my problem. I can't install chan_capi anymore. It has been running very well but then I run into trouble. so I decided to update to the latest CVS version of asterisk and of chan_capi. But now I can't compile chan_capi anymore. I'm running SuSE 9.0 and I think the problem is caused by an update that

Hi again! > I have excellent success with the tiny "fcpci" and chan_capi, which is > also working great with capi4hylafax. See > net-dialup/fcpci-0.1-r1 in gentoo (should not be difficult to use this > on other distros, but I have never done so). Do not confuse this with > the "fritzcapi"! I managed to install fcpci and it seems to run fine (capiinfo

Hi all, I have managed to setup a Fedora 7 box with 3 ethernet cards and two ADSL modem/routers from different suppliers as LARTC recommends. I am able to direct traffic for specific internal IPs either to one or the other ADSL line. However, I am faced with two problems I am struggling for the solution: 1. I have opened a few ports on the ADSL router/firewalls to talk to internal hosts; say when

I'm trying to compile chan_capi-0.5.4 on Slackware 10, but I have bunch of errors. (By the way, can I use chan_capi for ISDN card with winbond w6692cf chipset?) I'm not a linux expert, still :-) Before compiling, when I type "modprobe capi" to load capi module, and then "lsmod", i get list of modules: capi 6208 0 kernelcapi 30496 1

Hi I use RH 9 + asterisk v1.0 stable + 2 PCI fritz cards + chan_capi 3.5 and it works fine, Since my users want fax fonctionnality and customers know 1 of the msm as fax number I wanted to try the chan_capi-0.3.5 patch if I patch chan_capi and run make, I get an error message , as you can read below, orginal chan_capi compile works, when patched I get an error, no CID ? Any idea ? anybody

Hi, I have a problem for install chan_capi My pc: Suse 9.1, with asterisk current stable en cvs I have download http://www.junghanns.net/asterisk/downloads/chan_capi.0.3.5.tar.gz And the path from http://www.levigo.de/VoIP/chan_capi-0.3.5-cvs-HEAD-patch.tar.bz2 And patch the chan_capi # cd chan_capi-0.3.5 # patch -p1 < chan_capi-0.3.5-patch.diff # make /for install My error

I've got a brand new Eicon Diva Server BRI card and I want to configure it with Asterisk. I managed to get asterisk and zaptel to compile and install, I've compiled and installed the drivers for the Diva card and now I need to compile and install the chan_driver for chan_capi. Unfortunately this fails miserably. I get the following messages: I'm using: Kernel 2.6.16.37.4,

Hi all, I?m using * with a Suse 8.1 (kernel 2.4.19-4GB). My hardware are a Eicon Diva 2.01 PCI and a Eicon Diva Server 4BRI; I have installed the drivers wich came with the distribution using the distro installer (yast2). I?m experiencing problems with outgoing calls so I?ll try with chan_capi instead of chan_modem. The point is that I?m having problems with the compilation:

I am trying to compile chan_capi 3.3.4a, but I end up with lots of gibberish. Near the top it states that capi20.h doesn't exist. Searching for the file, several show up: # find / -name capi20.h -print /usr/src/linux-2.4.21-144/include/config/isdn/capi/capi20.h /usr/src/linux-2.4.21-231-include/smp/include/config/isdn/capi/capi20.h

OS: Redhat 9.0 Kernel: 2.4.20-8 Asterisk: latest CVS head Hi all, I try to compile the latest chan_capi, but it won't work. I also tried the patch that is arround there from frank sautter and I have installed the asterisk header files. Asterisk is working very good :) and the Fritz AVM pc Card is running. capiinit: 1 fcpci running fritz-pci A1 3.11-02 0xbc00 5 lsmod: fcpci

Thanks Jorg, it's worked, but what modules i need to use it with asterisk? I insert load => chan_capi.so in /etc/asterisk/modules.conf and chan_capi.so=yes under [globals] section. When asterisk start, I get this error: == Parsing '/etc/asterisk/modules.conf': Found [chan_capi.so] => (Common ISDN API for Asterisk) == Parsing '/etc/asterisk/capi.conf':