similar to: call waiiting and 3 way calling

I've just made an interesting observation that I'd like to share with you all: the popular Sipura SPA-2100 just doesn't seem to be as great as I'd hoped. I've been trying to get inbound AND outbound faxing working via Asterisk and at least one of my termination services: Voicepulse or Sixtel. In general, inbound has been working flawlessly but outbound has been pretty

I have packet8 and I have spent many hours on the phone with them. If someone has found away around there DTA configuration I would like to know so I can bring it in house to my * box. But as far as your question is concerned. No. Not that I know of. They wouldn't give me any information about the configs. .o-------------------------------------------------------o. Brian Fertig Network

Hi everyone, I just got a Sipura SPA-1001 and have connected my Tivo Series 1 (yes its old). When I do a test call with Tivo, the call always fails (it seems to dial the number but never connects). I can pick up the phone line and hear the Tivo "talking". I've tried looking around for anything special I need to do but its still not working. I can connect a phone to the SPA-1001

Greetings, I have a Sipura SPA-1001. When I make outgoing calls, I have very jittery sound. Incoming calls work fine. This wasn't the case a few months ago, I am running head as of yesterday. Any suggestions? Thanks, Erik

Hi, I am new to asterisk , i am getting the following error,& the /etc/zaptel.conf file entry is as follows defaultzone=us loadzone=us span=1,1,0,esf,b8zs,yellow bchan=1-23 dchan=24 Parsing '/etc/asterisk/zapata.conf': Found Jul 1 18:33:35 WARNING[16384]: chan_zap.c:664 zt_open: Unable to specify channel 1: No such device or address Jul 1 18:33:35 ERROR[16384]: chan_zap.c:5296

Hi List, I hope this setup must be done by our astersik users.. I am using Sipura 3000 to receive PSTN calls and forward those calls to asterisk for voice processing and after that, I am transferring call to extension through FXS port on SPA 3000. Currently, media of call is trombone through asterisk. i.e achieving blind transfers on asterisk with SPA 3000. Is it possible to stop trombone

Hello, I've been experimenting with Asterisk 1.0.6 and a Sipura SPA-3000, and I've run into a couple of questions I haven't yet found clear answers to: It appears that the SPA-3000 has no call progress on it's FXO interface? Asterisk considers a dial() as answered when the SPA-3000 has dialed the number on the PSTN line, not when someone has answered a phone on the

I am running * 1.0.5 and have been having lots of problems with outgoing calls and their sound quality. I am using ULAW for the codec and sixtel for termination. Basically the problem is that portions of the call seem to be lost and replaced with silence. Sometimes I can't hear the person talking othertimes they can't hear me. This situation comes and goes throughout the call. Bandwidth

Hi All, I'm on of those brave souls who bought into the preproduction beta of the Sipura SPA-3000 FXS/FXO adapter. I've had the unit a few days and am exploring it's workings. I really want it mostly as a straightforward FXO adapter, to replace an X101p. Let me be clear, I'd love to support Digium in every way possibe, and will likely buy a TDM40 card shortly. But, the X101p has

Please tell me the obvious mistake I'm making here. (And yes, I well know about NAT and one-way audio problems in general.) I want to try the new T.38 passthrough stuff, downloaded it, built it, tested it with an SPA-2100 and can hear announcements fine but echo test shows no audio outbound (i.e. SPA to Asterisk). Registered the second SPA-2100 channel with an Asterisk 1.0.10 server in

I have my DTA310 getting an IP via DHCP. I loaded the unlocked firmware version (Application Code Version: DTA version 1.0 US (8x8 001111)) onto it via TFTP, so I could access the SIP configuration. Under the SIP config, I put the IP of my * system, the 5060 port, and for Domain Name, I put default (is that right?). I checked off the Send Registration Request box. Dial Plan I left at the default,

Hi, I'm looking for a full list of xml provisioning variables of the SPA-2100/3000. Currently the Sipura website has example XMLs only for the SPA-841 [1] and SPA-941 [2]. I'm mostly interested in the CallerID type selector variables and whatever variables control the PSTN<->VoIP settings. Sipura Configuration website form field names are numeral only. :( [1]

Yes, After call transfer,I don't want to be media go through Asterisk. Is it possible ? Thanks, Karun. -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com]On Behalf Of Dameon D. Welch-Abernathy Sent: Thursday, August 12, 2004 12:07 PM To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] Blind Call Transfer using

If this has been covered before - I appologize. We use some Sipura SPA-2000's with the g711 codec and all seems fine (except for the occasional failure to register errors in my asterisk logs - but I will save that for another post). g711 call quality is on par with our Cisco 7960's. However, when using the g729 codec, the call quality on the Sipura device goes downhill on the PSTN side

Dear list, I am playing with Sipura 3000 since last week. Through the wiki pages I could get running it reasonably well. My setup is that of a Sipura, linked with a local analog cordless phone, a local PSTN line and the setup to link to an asterisk server located at a remote static ip address. I can dial the cordless phone from other extensions located at the asterisk server; I can dial out

I'm about to purchase an adaptor for a POTS data modem and was looking at the Sipura line of adaptors (SPA-1000, SPA-1001, SPA-2000, SPA-3000). Do these work well? Anyone have a suggestion on which model of the Sipura I should get? Does one work better with * than the others? Are there other adaptors that work better that I should get? Thanks, -Dave -------------- next part

Some people on this group may have understood from messages posted here that the Sipura SPA-2000 is not currently available for shipping. That is not the case. Voxilla.com has the Sipura SPA-2000 available for immediate shipping, and has had them since late November. The price is $109.95, and it comes with a month of free VoicePulse service with activation fees waived (a $65 value). In return

Hi list, Well I really didn't want to see things get to this point, but Sherman at Sipura along with their President Jan F. leave me no other choice. SIPURA has been provided a letter from our attorney for Breach of Contract and damages. They have yet to respond. A quick background. 1. Sherman (SIPURA's Director of Marketing), stated that we would do a join press release for the Oct

I had a problem in the past with a SPA-3000 acting funny that Sipura helped me with by telling me how to factory reset it. They responded in less than a day to my email request and the unit has worked fine since. I've had similar turn around on requests related to a batch of SPA-841 phones. They were all handled by real people who appeared very knowledgeable on the products. This appears

I am located in the UK, and I am using Sipura spa-2000 adapters to connect analog phones to a voip network. The network connects to the PSTN as well via the Sipura spa-3000 adapter. I would like to provide surge protection for the spa-2000 and the spa-3000 adapters. 1. For spa-2000, fxs port: What is the maximum tip-to-ring voltage before damage to the the adapter occurs? 2. For spa-2000,