similar to: Net installations failing

I'm trying to use this universal DOS TCP/IP boot disk available here: http://members.iinet.net.au/~bdriver/bootdisk/ It requires an MS-DOS formatted disk created by Windows XP. It works great as a floppy but doesn't boot at all with memdisk. The problem can be simplified down to just the XP boot disk. If you make an MS-DOS startup disk with XP on a floppy, dd the floppy to an image

I can't seem to figure out how to partition for install. I've tried both CentOS 8 and 7.7 netinstalls. I've got 3 disks: sda (big hardware RAID array), sdb (SSD), and sdc (internal SD card for booting). I want to put /boot on sdc, /usr on sdb, and / on sda. I don't care what format is used on sdb and sdc, whatever will let it boot. I want LVM on sda so that I can use

I'm trying to make a bootdisk in my CentOS server and I got this error.. any ideas? [root at server:~]$ rpm -qa kernel kernel-2.6.9-5.0.3.EL [root at server:~]$ mkbootdisk 2.6.9-5.0.3.EL --device /dev/fd0 Insert a disk in /dev/fd0. Any information on the disk will be lost. Press <Enter> to continue or ^C to abort: cp: writing `/tmp/mkbootdisk.d20227/initrd.img': No space left on

On 03/05/16 20:22, Fred Smith wrote: > On Sat, Mar 05, 2016 at 12:48:17PM -0600, g wrote: >> >> >> On 03/05/16 09:04, Chris Murphy wrote: >>> You don't say how you created the media. >>> >> -- >> >> true, i did not say how i created cd's. > <snip> >> so you are saying that netinstall is incorrectly written because it

Hi, Currently I am building a new PXE boot environment and during that I noticed something odd while attempting to boot using one of those universal netbootdisks based on the '3Com Universal NDIS driver v1.00' (aka undis3c) driver. Using pxelinux.0 this works like a charm, but when I switch to gpxelinux.0 the 3Com driver bails out on me... all other configuration is the same. Have

I manually downloaded the rpart package and installed it using dpkg, without removing the old rpart package first, and now everything works. During the installation, dpkg said: Unpacking r-cran-rpart (4.1-13-1cran1xenial0) over (4.1-13-1cran1xenial0) So again, it seemed that the new version had been installed, but it really wasn?t. I had no idea that something like this could happen. Huh.

Hello all, a couple of weeks ago I've been installing CentOS 4.2 on a very-old server machine with MSI server board based on Intel GX440 chipset, two Xeons 500Mhz and one 1Gig of RAM. There is an AMI MegaRaid 467 installed as a storage controller, which causes some troubles with installation, as stock CenOS4 install and production kernels doesn't have older megaraid.ko module compiled,

On 03/05/16 09:04, Chris Murphy wrote: > You don't say how you created the media. > -- true, i did not say how i created cd's. i used k3b as it is easier, less to remember, than using command line. usb's sticks were created using unetbootin and fedora-liveusb-creator. yes, i did not mention that i tried with 2 usb sticks. failure was same, did not feel it mattered. failure is

Hi, Sorry if this is already known... contour() sometimes draws contour lines that intersect. Is there a temporary fix? A dataset which causes problems is at http://www.maths.uwa.edu.au/~adrian/dumpdata.R If you try just source("dumpdata.R") image(huh) contour(huh) the 100 x 100 matrix 'huh' contains an hourglass-shaped region of values around 0.8. The contour plot

Hi! Asterisk in Debian/Lenny claims to be bristuffed, not? At least the the Debian patch tracking system shows the bristuff-patches: [1] http://bit.ly/bRRHe7 We have a QuadBRI-Card and recently needed support from Junghanns.net but they refused telling us there is no bristuff installed because of the show version output: *CLI> show version Asterisk 1.4.21.2~dfsg-3+lenny1 built by pbuilder @

I have a Laptop with 6G HD, there are FD and CD-ROM port to external devices. But I only have a external floppy drive, no cd-rom. Now I boot from 1fd linux and make HD as partition, next I want to install FC4 on this laptop. But FC4 CD only support CD-ROM or USB memory, I tried to write diskboot.img to /dev/hda1 with dd command, I found all files in image bootdisk.img in /dev/hda1, but when I

Hi, I am trying to get xen booted on a new mainboard I bought using efi-syslinux/mboot. No success so far. When I choose the xen menu entry except from some characters being wiped from the bottom of the screen nothing is happening. I have made a typo in the xen kernel filename. Nothing changed, no errors about wrong a filename were displayed Initially I compiled syslinux 6.03 (slackware64,

Has anyone had success patching chan_sip.c so that Asterisk will recognize the tel: header for RDNIS information? exten = get_in_brackets(tmp); if (!strncasecmp(exten, "sip:", 4)) { exten += 4; } else if (!strncasecmp(exten, "sips:", 5)) { exten += 5; } else { ast_log(LOG_WARNING, "Huh? Not an

On Wednesday 08 July 2009 16:58, Vikram S. Adve wrote: > Hi, David, > > Is the LLVM-based back end you have been working on for the Cascade > system used by this or any other Cray installations? Is the XT5 > related to Cascade in any way? Thanks, Yes, the LLVM backend is used in the Cray compiler on the XT5. Thus LLVM is compiling code that runs on over 180,000 cores. Pretty

I have periodically been trying to get memdisk to boot images larger than your average 1.44Mb floppy and have always been unsuccessful. I cannot boot anything greater than 1.44Mb. The systems I'm attempting to do this with are not too old but they are not recent either. One is a Asus P5A and the other is a Intel SE440BX both with the most recent bios firmware patches available applied. If

Hi, Asterisk is new for me. I had a working configuration, but suddenly I can't call anymore with my voip provider. I am not aware that I changed anything in the configuration, but who knows. Can somebody explain me what is happening here? I changed username, password and number. -- Executing Dial("Zap/2-1",

I just installed a fresh 3.3 system (because those are the ISO's I had on hand). Upon running yum update, it starts to download headers and then stalls. I hit Ctl-C and it continues to download about 4-5 more headers and stalls. I hit Ctl-C again and it pulls a few more headers. Anyone seen this and/or know how to fix it? TIA Mike

Hello, I''ve checked out my rails tree from svn into the location I intend to run in production mode. However, I am unclear on what exactly needs to change for it to work in production mode. Yes I have: "bin-environment" => ("RAILS_ENV" => "production") When I switch to the externally routed IP address instead of 0.0.0.0:3000 and try running: %

Hallo, I try to boot the windows 98 bootdisk via memdisk. It doesn't work completely. Booting a freedos FD image works, booting the windows 98 image works too. But the windows 98 boot disk then should extract the file "ebd.cab" with the file "extract.com", and that step fails. Is that a syslinux problem or a windows problem? Viele Gruesse! Helmut

> On Nov 4, 2020, at 9:21 PM, John Pierce <jhn.pierce at gmail.com> wrote: > > is it RAID 0 (striped) or raid1 (mirrored) ?? > > if you wrote on half of a raid0 stripe set, you basically trashed it. > blocks are striped across both drives, so like 16k on the first disk, then > 16k on the 2nd then 16k back on the first, repeat (replace 16k with > whatever your raid