similar to: FW: Re: Polycom IP500 - problems with multiplesimultaneous calls

I have these very phones and took me a while to figure this out myself. The phone considers each line registration to be a line with a second line. So, call line while someone is on a call and another instance will appear below. That means you only need one registered instance for the phones to get two incoming calls. If however you want to have a second registered extension rung if the first

Hi All - I've got a load of Polycom phones, and for the most part, I think they're great, but one thing that is bugging the heck out of me (and my users) is the "on-hold" feature. When you're on a call, and another one comes in, it doesn't ring the second line appearance on the phone, even though I have it registered separately, and I've tried to make my

hello, i can't figure out how to set position of panels of my stripplot - i`d like the panels of one level of the factor stage (nr. of panels within each stage, A: 12, B: 12, C: 12, D: 4, each panel representing a site) to be in one column, with A to D from left to right and with descending site.nr at each row. like: A1 B1 C1 D1 A2 B2 .. .. A3 .. .. .. how is this achieved? any help

> Hmmm... I have this aweful feeling that I'm choosing the > exact wrong time to ask a "newbie question" :) Oh well, here > it goes. > > The quick question is : "How do I dial an extension?" > (answer is probably - "you don't" in which case:) "How do I > dial my asterisk box?" - I have no outside line, I just want >

Hi All - Well, after happily existing in a one office environment with asterisk for a few months, I've now decided to start adding in our other offices with their own * boxes and IAX connections (over VPN). Unfortunately, I'm an idiot and I can't get it to work. I'm having some kind of problem with codecs, I guess, but I don't understand what or why. When trying to use

Hello Everyone,   This is my first attempt to do something in R. As a precursor to a Willingness to Pay analysis, I want to conduct a Mixed Conditional Logit analysis but am unsure how to proceed because of some nesting within my data.   Below is some data and code that illustrate what I’m trying to do. The data are based on responses to a conjoint survey obtained during pilot testing. In the

Hi All, I have a data frame with a group of variables named b1, b2, b3, ..., b18. These variables take the value 1, 2 or NA. For each observation, I want to do some computation by looping over the values for the group of variables: b1 to b18. In STATA I would do: forval i=1/18 { --- use b`i' for computation ---- } How can this be done in R? Deepankar

Hello, Does anybody have the latest Boot ROMs for the IP500 and IP 600 Polycom phones. I have one of each and can't find the Boot ROM v 3 anywhere to download. I would also love a good sample phone.cfg and sip.cfg files from an Aussie asterisk user to look at. Also the ip500 is having problems trying to load the bootrom 2.6.2 ? Any ideas? Kind regards Michael Felder IT Medic

Hi, I just got and setup a new ip500 yesterday and it worked for about 15 minutes. Then it froze during a reboot.Now, when power cycled, the logo comes on for 3 seconds and then the screen is blank and nothing further happens. 468* factory reset doesn't work. I am about to send the phone back, but wonderd if anyone had a suggestion first.

I've had an IP300 for a while now and it's been working fine. I just got an IP500 and when it connects to the FTP server it downloads the new bootrom and says error loading. The bootrom is fine and works on the 300... In addition, I downloaded a new copy to be sure and it still doesn't work. Can anyone give me some advice?

I've been looking at Asterisk for a while now, and want to set up a small installation at my house. I did originally want to get a Cisco IP phone, but due to price and it not being easy to obtain the SIP firmware I have decided again them. I am very interested in the Polycom IP500. I can find many places in the USA that sell it but nowhere in the UK. Also can anyone recommend some good

Hi I am just getting started with asterisk and trying out using the sample files with a Polycom IP500 (latest sip.ld etc) My question: phone status says not registered: /system status/server status "Line 1 poly is not registered" console message says: handle_request: Registration from '<sip:poly@10.1.20.3>' failed for '10.1.20.50' I have tried dialing and

Greetings, I'm wondering if it's possible to display line breaks with caller ID display. I have the Polycom ip500 phone, and what I am trying to accomplish is instead of the phone saying 'Incoming call from: name/number' i want it to appear on the phone like this Incoming Call from: Menu Context last in Name Number I tried using \n and \\n between the variables (${VAR} \\n

Did you try to boot without lan just the power ... I've had this same problem to and rebooted the device without lan connection -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Louis-David Mitterrand Sent: woensdag 26 januari 2005 11:36 To: 'Asterisk Users Mailing List - Non-Commercial Discussion'

tuning for ulaw g.711 - Polycom IP500 I've got QoS ironed out at this point (dedicated section of bandwidth with VoIP having priority), yet ulaw is still unusable due to small 'holes' in the audio. Running iperf tests shows packet loss at very low percentages (< 0.02 %), and when we do drop, it's only 1 packet at a time. I thought ulaw was supposed to handle this OK.

Does anyone have any sample configuration files for the Polycom IP500 phones that have been cleaned from the samples that come with the 1.5.2 firmware. I'm wondering how much is necessary, and how much will just work by default. I am really only setting the line authentication , and sntp/timezone-offset for each phone, and everything else is just left as default. Can I just pull unchanged

Hi, Im having problems getting a polycom IP500 phone to register. Ive edited the xml files and appropriate .cfg files and it shows up registered with no ip address and if I go into the phones status menu and pick lines it says its not registered. If I tell it to upload the log file it doesn't say anything about why its not registering / what errors its getting. Any advice is appreciated.

I just noticed something when I 'sip show peers' from the CLI, I get the following: 6113/6113 x.x.x.x D N 255.255.255.255 62927 OK (66 ms) 6112/6112 x.x.x.x D N 255.255.255.255 50079 OK (160 ms) 6111/6111 x.x.x.x D N 255.255.255.255 60810 OK (141 ms) 6109/6109 x.x.x.x D N 255.255.255.255 51331 OK (151 ms) All of those

Hi, I just got my ip500 back after months of waiting. Is there an easy way to get it hooked up to asterisk without [t]ftp servers and all that or is there a quickstart page somewhere? tia r

So far no one I have talked to has either had this issue or does not know a answer. I currently run asterisk 1.0.9. I have two issues to deal with. 1. The caller waiting caller ID does not show on the uniden hand held that is hooked to a sipura spa 1000 or my Polycom ip500. 2. When a caller is calling in and I hear the caller waiting beep on the line when talking with somone, is there no way