similar to: One way audio [Asterisk + Innovaphone IP3000 + asterisk-oh323/h323]

Hello everybody, I?ve been pulling my hair for a week now over a problem, and I really don?t know where to look anymore. Here?s my setup: There is an Innovaphone IP3000 VoIP gateway on the LAN (10.253.30.254). I can use it to send and receive calls from physical phones attached to it. I have setup Asterisk 1.0.3, with H323 and openH323, and on the same server I also setup GnuGK (10.253.30.1). I

* compiled from cvs, i am trying call ip phones in callmanager 3.2 10.17.0.2 is my callmanager i noticed from network dumps that instead of sending rtp to the ip phone, * sends it to 10.17.0.2! thereby causing no audio from * to ip phone. audio from ip phone to * is ok. only callmanager calls fail. netmeeting works ok... here is the debug, thanks for any info ~kelvin H323 debug enabled --

My configuration is: [ISDNPRI] -- [CISCO AccessServer AS5350] --<H.323>-- [ASTERISK] -- [CISCO ip phone 12SP+/Skinny] When call is initiated from IP phone -> Asterisk -> AS5350 -> ISDN everything working ok (RTP is ok). But, when call coming from ISDN -> AS5350 -> Asterisk -> IP phone IP phone party can hear ISDN party, but ISDN (incoming) party canNOT hear IP phone party

Try sending 5350 config and oh323.conf, versions, etc... -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Goran Dj. Sent: Wednesday, December 22, 2004 4:43 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] Asterisk->AS5350 misplaced RTP to 127.0.0.1(AS5350 party

Does asterisk work with CCM as gateway ? When I trying call asterisk,I totally can't hear any sound. When call ohphone - works good. 10.0.1.219 is CCM, 10.0.1.207 asterisk. Trace messages here : -------------------- == New H.323 Connection created. -- Received SETUP message... == Setting up Call -- Calling party name: [5001,] -- Calling party number: [5001] -- Called party

Hello, I'm running Asterisk 1.0.1 (the same was with 0.9, 1.0). When it receives inbound H.323 call it makes connection and uses local 127.0.0.1 address to send audio stream: remoteIpAddress: 127.0.0.1 When making outbound calls from Asterisk it makes correct connection to send audio stream. Is it a bug in h.323? Is there some more settings to make in .conf files? See detailed debug below:

Hi all, I used oh323 support from inaccess. It work very well. I would like to test h323 integrated support. This my problem when I test it : I cannot heard any thing in both way. The test is : SIP --> Asterisk --> H323 This is th debug trace from h.323 : -- Executing Dial("SIP/someaccount", "H323/0033172897104@somehost") in new stack

Could you help me with this problem? When I call H323 gateway there is no sound in both ways. Here is h323 debug: ----- begin ------------------------ -- Executing Dial("SIP/msn-6297", "H323/73952389512@peer:1720") in new stack Allowed Codecs: Table: G.729A{sw} <1> G.729{sw} <2> G.711-uLaw-64k <3> G.711-ALaw-64k <4>

Hello... I'm having problems with H323/G729 setup. Below is the output of h.323 debug when making a call. I use a SIP phone connected to an * box in the same LAN. The * connects to a h323/g729 PSTN terminator through internet. Calls rings and are answered in the other side, but I get no sound at all nor the other side does (complete silence in both sides). I thought this would just happen

Hello... I'm having problems with H323/G729 setup. Below is the output of h.323 debug when making a call. I use a SIP phone connected to an * box in the same LAN. The * connects to a h323/g729 PSTN terminator through internet. Calls rings and are answered in the other side, but I get no sound at all nor the other side does (complete silence in both sides). I thought this would just happen

Hi all: I've got some core dumps when I use chan_h323. I dial an extension using h323, routed thru an E100P (like a H323-ISDN_PRI gateway). Sometimes * hangs, sometimes not. The client used for test es SjPhone (http://www.sjlabs.com/). This is the data for one core dump: (gdb) bt #0 ast_rtp_get_us (rtp=0x0, us=0x5074759c) at rtp.c:790 #1 0x41f8879c in create_connection

Hi all, I'm having trouble with H.323 outbound calls, * connects but there is no sound in both ways. I'm using X-Lite as SIP client with GSM codec and dialing to ITSP (which using cisco, I think) over H.323 with G.729 codec. I have 4 digium G.729 licenses installed and this is onli one call. I tested my * with another ITSP over SIP and G.729 codec and there was all ok Here is my configs

Hi, My configuration is SipPhone<-->*1<--->*2. My asterisk version is 1.4beta3. I installed pwlib,openh323,chan_h323. When i call from SipPhone--(SIP)-->asterisk1---(H323)-->asterisk2, there is no audio. Using 'rtp debug', I can see that rtp packets are being received. Rtp packets are being exchanged. I also tested chan_ooh323, but to fail. Can anyone recommand best

Hi all, I am using chan_h323 from Asterisk CVS to interconnect with GNUGK v2.2.2. Then I made call from a H323 EP, thru GNUGK, to SIP EP on Asterisk. However, I only heard ringing when the call was answered on SIP side. Below is the debug from chan_h323. Any help is welcome. Thanks. *CLI> == New H.323 Connection created. -- Setting up Call -- Call token:

Hi all, I'm using following software and equipment and I have very strange behavior: Asterisk CVS-NHEAD-05/30/05-16:42:41 H323 gatekeeper - GnuGK 2.2.2 IAX2 client - Firefly 1.9.8 build 3945 H323 client - SJPhone Build 1.50.271d H323 gateway - Welltech Wellgate 3504A When I dial from Firefly (IAX2) -> SJPhone (H323) everything works as expected. When I dial from SJPhone (H323) ->

Hi all, I am trying to use a "Siemens optiPoint 300" IPPhone (H.323 only) with Asterisk (1.0-RC2). So far I have been using the H.323 channel included in the tarball (Nufone ?). I encountered a strange behaviour when I try to make a call from the IPPhone to my Asterisk box : =====> here is the H.323 configuration for the incoming calls (192.168.1.50 is the IP of the

Hi All. I'm using RedHat 9 I configured the chan_h323 and asterisk from CVS. This is the scenario SJ_lab_phone(sip) ---------------> Asterisk -------------> H323 GK --------------> PSTN I have tried all codec's and always the same result, the called phone will ring without dropping for how ever I allow it to but as soon as it is answered it immediately gets disconnected.

Hello, I have a strange h323 issue. After executing command "Dial("SIP/333-0d1dfe00", "H323/361737052390920 at ccg|5|tT")" at Oct 18 22:32:23. Meanwile I have sniffing traffic on port 1720. The call was established just at Oct 18 22:33:03 (New H.323 Connection created.) and also packet sniffer grabs the h323 invites at this time also. So my question is what

Hi, all! when my h323 phone dial in Asterisk system, i can hear nothing. and the following is the log slice i picked from /var/log/asterisk/full. ps: i am using red hat AS5 kernel 2.6.18-53.el5,Asterisk-1.4.24.1, pwlib_v1_11_0, openh323_v1_19_0_1. Best Regards! 81948 [May 6 10:07:34] VERBOSE[11579] logger.c: -- Remote UNIX connection 81949 [May 6 10:07:51] VERBOSE[29627] logger.c:

I've got a problem connecting to Cisco call manager. I dial a numder and hear only ringing h.323 debug shows this Allowed Codecs: Table: G.711-ALaw-64k{sw} <1> Set: 0: 0: G.711-ALaw-64k{sw} <1> -- Making call to 3200@10.1.105.3. == New H.323 Connection created. -- 6129 is calling host 3200@10.1.105.3 -- Call token is