similar to: Switch polarity to disconnect a FXS channel

I'm testing a TDM400P with FXO module to receive incoming calls from an analogue line and send it to a SIP device. To recieve callerid, I need to use cidsignalling=dtmf and cidstart=polarity. The problem is that when a call is finished, the TDM400P seems to require about 20 seconds to prepare for the next incoming call. If a new call comes in within 20 seconds after the previous call was

Hey guys, I've been struggling with hangup detection on a Centrex system for a bit now, I was on site Saturday and I took my DMM with me. It would appear that this Centrex service provider uses polarity reversal at the beginning of a call and several times after hangup. I've been reading the archives for the last year and it looks like there was some work done that matches my

We have a te410p, with the following connections: span 1 connected to a 32 Channel EuroISDN span 2 connected to a card in a legacy pbx (Meridian) span 3 connected to a 10 Channel EuroISDN span 4 connected to a card in a legacy pbx (Meridian) We have no need for the meridian now, and decided to turn it off. I did not change the zaptel.conf settings, nor the zapata.conf settings. When the

Can anyone tell me what this message means? Got event 17 (Polarity Reversal)... I'm running DAHDI 2.0 with a TDM401 card. Asterisk version 1.6.0. It appears that I get this Polarity Reversal each time an inbound call hangs up. This results in another ring, but no one is there. It appears as an unknown caller, but I believe its a phantom. Thanks, Jim [Oct 10 12:47:54] NOTICE[6669]:

Hi Can TDM400P detect polarity reversal on FXO module? We have C.O. lines that reverse polarity on Answer and release. Thank You This message (and any associated files) is intended only for the use of the individual or entity to which it is addressed and may contain information that is confidential, subject to copyright or constitutes a trade secret. If you are not the intended recipient you

hi: In my zapata.conf i have 4 fxo configured channels,for fxo number 1 to 3 i added polarity reversal property but for fxo number 4 i didnt add polarity reversal property but it still giving me on cosole that fxo number 4 is polarized (because the line on fxo number 4 is not polarized). what i want to do is to not let polarity reversal take effect on fxo number 4. that what i have in my

Hi ! I ma having trouble with my PTSN line. When I call to my asterisk I get this.. -- Executing [s at from-pstn:3] Hangup("Zap/5-1", "") in new stack == Spawn extension (from-pstn, s, 3) exited non-zero on 'Zap/5-1' -- Hungup 'Zap/5-1' -- Starting simple switch on 'Zap/5-1'[Jan 5 12:45:06] NOTICE[2893]: chan_dahdi.c:6869 ss_thread: Got event 17

I would like to know if any body tried to connect gsm gateway with polarity reversal to fxo module at asterisk server ,and if the polarity reversal solve the problem of the answer and hangup supervison on calls .i appreciate any help.Thanks in advance;Wassim _________________________________________________________________ Express yourself instantly with MSN Messenger! Download today it's

Hi, I have a problem with polarity reverse this my dahdi config [channels] context=default usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1

Hi Folks, I've been looking around and found some references of some Caller ID patches (Mantis bug#9) for X100P and TDM400 for Netherlands, Sweden and UK. It's been quite hard to understand what has finally been incorporated to the distribution (if anything) or which patches must be applied in witch snapshot of the repository. I've tried some different approaches but nothing worked

On how to even search for this "feature" as I have no idea on what it can be. I've got a meridian linked to * (by EuroISDN) which is linked to a ISDN30. I can make calls from the meridian, and receive calls into the meridian. Great stuff. However, if someone dials an invalid number, then instead of hearing a "three tone", the line just drops and goes dead. The console

Hi there, I have a *really* weird issue with rspec on rails: Given a time meridian formatted using %p When I run `rake spec` the time meridian is converted to lower case: expected: "Today 08:00 PM", got: "Today 08:00 pm" Yet when I run `rake spec:models` and `spec -cfs app/models` the specs pass, ie the the time meridian is in upper case. Anyone got any ideas how I

Hi, Some time ago, there was a discussion about the inability of nortel meridian pbx to dial analog tones thru an meridian ATA, and the work arround was to enable 808 function that makes the dtmf tones long for the current call. The nortel meridian is connected via a nortel ATA to a TDM400 to a FXO port. Anyone can say me who to actually use that function (you dial something or is pbx

Yesterday I was using one of the cheap Radio Shack phone polarity on various phone outlets in my house and ended up plugging it into my IAXY. While the regular phone jacks tested OK, the IAXY tested as being reverse polarity. The tester was plugged directly into the IAXY so there is no chance of this being caused by crossed wires. Is this something that is misconfigured on the IAXY, a hardware

Hi I want to connect asterisk 1.0.9 ( kernel 2.6.8-2 debian )with TE110P and Nortel meridian option 11c release 25.40 with NTBK50AA card which is An E1 card. But the main problem is the first stage that no sync occurs the * card never syncs with meridian card I am using euroisdn, ccs , hdb3, crc4 , pri_net on asterisk And I am assuming that meridian is using same as it is

Hello, This is a little off-topic. I have an Ericsson FCT f251m, according to the specs it supports call signalling through polarity reversals and loop break, but it's currently disabled. On my PSTN line, my TelCo does send polarity switchs to signal answer and hangup (answeronpolarityswitch=yes and hanguponpolarityswitch=yes in zapata.conf), and asterisk detects it alright. I've been

We have a dinosaur Meridian system (~version 2) with 4 digital lines going to a Repartee Voicemail server. The Repartee got smoked by lightning two days ago and I'm itching to get Asterisk installed in its place. PRI is not an option since the system is so old that it doesn't even support PRI. I need to figure out how to connect the old Meridian to Asterisk otherwise. Any advice on

Hi, Does anyone have any experience connecting Asterisk to a Meridian system using an ATA2 and x101p? The basics work -- I can make outbound calls, receive inbound, and use flash to transfer calls, but certain things do not work, specifically with calls from internal extensions. - Does the Meridian/ATA2 pass any kind of callerid info? We do not have external callerid, but I'm not even

Greetings to one and all on this fine list; We have the current system: Meridian 1 Option 11 +-------------------+ | | ISDN/30 (DASS/2) ===> |NTAK79BB (2MB Pri) | | |<-->4x16 port Digital / 1x16 port Analogue ISDN/30 (EUROIDSN) ===> |NTBK50AA (2MB Pri)

Today I received a TDM11B (1 FXO and 1 FXS) and got it installed just fine. I bought the card mainly to get caller ID to work properly in Sweden, and that works just fine. However, if the called or calling party hangs up after I hangup my SIP channel, polarity CID detection kicks in and dials a couple of signals to my incoming context. This happens with Asterisk 1.0.6 and CVS-HEAD. I have tried