similar to: Zap Fxs port always answers?

I've noticed a problem with calls to Hangup when talking to my Norstars over channelised T-1 E&M trunk lines - it's been present since I started to fiddle with Asterisk last December and it's still present in 'Asterisk CVS-HEAD-08/13/04-10:37:13'. Specifically, when a call is connected to Asterisk from the Norstar DTI card to my T100p I get the following conditions

Hi, I have a legacy Norstar system that I'm looking into integrating with my Asterisk setup. My first attempts have worked, which involves a Wildcard X100P FXO card in the * box connected to the Internal ATA (FXS port) on the Norstar system. Calling from SIP -> Norstar works fine, since the SIP caller initiated the call and generally will be sane enough to hangup the phone when

Hi there! We have an old legacy norstar phone system m8x24-ds ( dr5 ) and a couple of m0x16. It has 5 external analog lines. It has no auto attendant, and no voicemail. So every incoming call is forwarded to a operator, she pick up the phone, talks to the caller and transfer the call to the right extension. We are in Argentina, so buying a star talk is out of the question, there is no selling of

> -----Original Message----- > From: asterisk-users-bounces@lists.digium.com > [mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of Gary Reuter > Sent: Thursday, August 11, 2005 12:59 PM > To: asterisk-users@lists.digium.com > Subject: Re: [Asterisk-Users] PRI dropped calls w/ asterisk dropped > betweenpstn & norstar > > > I poured over my logs most of

Unfortunatly no on both counts. The arrangement right now has: PSTN Trunks & Stations <-> Nortel Norstar#1 <-CT1-> Asterisk#1 <-IAX2-> Asterisk#2 <-CT1-> Nortel Nortstar#2 <-> Stations The Asterisk boxes provide Voicemail to their sites Norstars and intersite calls over IAX. Local Voicemail works flawlessly at each site but there have been reports of PSTN calls

I have a two port TE205P Digium card. I have set everything up to create a native zap bridge between the two spans. Everything works perfectly except one thing. Our telco has a "password" that has to be entered as soon as a long distance call is made. So if I dial a long distance call from my meridian system, asterisk bridges the call between two channels, my telco picks up and gives

To All; My current issues is a 5 second delay for call that is being transferred from the Norstar units to the Asterisk servers VIA a PRI. Is their anything that can be done to speed up the transfer on the Norstar. Below is my current phone config. < Norstar1 >----PRI----< Asterisk-1 >----IP-WAN----< Asterisk-2 >---PRI---< Norstar2> The Norstars are MICS 0x32 4.1

I understand that ZFS provides fault data, via the zpool status command, that would (probably ??) allow a knowledgeable[0] zfs admin to determine (manually) when a zfs hardware element (today that''s usually called a "disk drive") might need "maintainence" or might need to be replaced. And there are sufficient features/facilities available in the current (b36+) release

Does anyone know which signalling protocol works when connecting the output of a NT8B90AL Norstar ATA2 analog terminal adapter to an FXO card? (fxsks, fxsgs, fxsls?) I'm trying to add an Asterisk branch to my Norstar PBX as outlined at http://www.voip-info.org/wiki-Asterisk+Nortel. - Mike

Outgoing call on Zap channel always gives DIALSTATUS ANSWER even when BUSY? Has anyone run into this? Here is my conf files: Zaptel: span=823,1,0,d4,ami e&m=1-24 loadzone = us defaultzone=us Zapata: usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes

All good information, thanks. However this is private network between Asterisk and a Norstar MICS about six feet away. So I'm holding both ends of the link. :-) > -----Original Message----- > From: David Troy [mailto:dave@popvox.com] > Sent: September 16, 2004 4:57 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] No Caller Name

----- Original Message ----- > Message: 3 > Date: Thu, 16 Sep 2004 07:57:15 -0400 (EDT) > From: David Troy <dave@popvox.com> > Subject: Re: [Asterisk-Users] No Caller Name sent from Asterisk over > National or DMS100 PRI to a Norstar MICS? > snip> > > I have a PRI link up and running between Asterisk and a Nortel Norstar MICS > > v4.1 . I'm having a

Hi all, I've seen a couple of posts recently from people who are doing something with Asterisk and a T100P and a Nortel PBX. However it's not clear exactly what they are doing. Does anyone know if it's possible to use a T100P or T400P as a DSX-1 interface to connect to a T1/PRI CO module in a Nortel PBX? We have a Nortel Norstar Modular ICS PBX and I'd like to plug its CO

Hello, Quick Diagram: Telco-PRI -> Asterisk <- Norstar PRI -> Norstar PBX (DMS100) (TE405P) (DMS100) | | V Cisco 7960G (SIP) I'm trying to change the Origination Number on my outgoing PRI, and running into a weird problem. If I make a call from a SIP extension off asterisk using the following context:

Hi, I have a question that I haven't been able to answer from the docs. I wondered if someone out there has tried to do what I would like to attempt. On our server, we have mapped a share called wrkgrps to drive G: Users then have various directories under drive G: which correspond with their department, i.e. accounts, personnel, etc. Each of these directories has a share which I have

I have Asterisk setup with two PRI's one going to my telco and the other going to a Norstar Meridian system. The Norstar Meridian is sending a BTN number that needs to be passed to the Telco. Is there a way to pass the BTN as a variable in the dial plan? Like CallerID(num)? What is the variable for BTN if so? Many Thanks. -- *** Forrest Beck IAXTEL: 17002871718 jonforrest.beck@gmail.com

Aloha, I have a Cisco Gateway the is functioning as my SIP Gateway to the PSTN. I have an Asterisk box, RC2 with a for port FXS card providing dialtone for a Norstar Key System. I have it working so when you press a line key on the Norstar you get dial tone from the Asterisk box. The user has to dial '9' then they can dial there number which is sent to the Cisco GW via SIP and the call

I''m struggling with a single table type (self) lookup. my ''personnel'' model has a supervisor_id and is_supervisor column. The supervisor''s select list is created by @supv = Personnel.find(:all, :conditions => ["is_supervisor = true"], :order => ''last_name'') in my personnel model, I have the following... def

Hi, I'm trying to get my X100P to Dial the following sequence to gain access to speed dial numbers on my Norstar PBX that the X100 is connected to... [FLASH] [*] [0] [22] (where 22 is the speed dial number) But so far I've had no luck, with the following extension:- exten => 922,1,Flash(${DIALOUTANALOG}) exten => 922,2,Dial(${DIALOUTANALOG}/*022) exten => 922,3,Congestion

Hi All; Can I do transfer for the call from zap/1 to zap/2 (both are fxs)? All what I need is to add the t argument for the Dail function? And how can I transfer to be in that senario: zap/1 dial a code to transfer for zap/2, once zap/2 answered, then he can talk with zap/1 (where the third party will not hear what they are talking), then if zap/1 hanged up the handset, the call will be between